[Wirelessdriver-support] still no luck getting en1 or en2

[Frank F. <fj...@ma...>]

Ok, I've installed this driver multiple times, run "repair permissions" 
multiple times, still no luck.  Any ideas?  Troubleshooting script 
below:

Last login: Tue Oct 29 08:38:30 on console
/Users/ffoti/Desktop/wireless\ dirver\ stuff/Utilities/Troubleshooting\ 
Info.command; exit
Welcome to Darwin!
[Frank-Fotis-Computer:~] ffoti% /Users/ffoti/Desktop/wireless\ dirver\ 
stuff/Utilities/Troubleshooting\ Info.command; exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.1
BuildVersion:   6D52
Darwin Frank-Fotis-Computer.local. 6.1 Darwin Kernel Version 6.1: Fri 
Sep  6 23:24:34 PDT 2002; root:xnu/xnu-344.2.obj~2/RELEASE_PPC  Power 
Macintosh powerpc
ppc7450

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 Oct 27 16:38 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 Jul 27 13:22 IOPCCardFamily.kext
ls: /Library/PreferencePanes: No such file or directory

### wirelesscard info

     | |             "VersionOneInfo" = ("NETGEAR MA401RA Wireless 
PC","Card","I$
     | |       +-o pccardb,7300@0,0  <class IOPCCard16Device>
     | |             "IOName" = "pccardb,7300"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::203:93ff:fe45:99e%en0 prefixlen 64 scopeid 0x4
         ether 00:03:93:45:09:9e
         media: autoselect (none) status: inactive
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <half-duplex,hw-loopback> 10baseT/UTP <full-duplex> 
10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX 
<half-duplex,hw-loopback> 100baseTX <full-duplex> 100baseTX 
<full-duplex,hw-loopback> 1000baseTX <full-duplex> 1000baseTX 
<full-duplex,hw-loopback> 1000baseTX <full-duplex,flow-control> 
1000baseTX <full-duplex,flow-control,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::230:65ff:fe01:f31b%en1 prefixlen 64 scopeid 0x5
         inet 172.16.100.96 netmask 0xffff0000 broadcast 172.16.255.255
         ether 00:30:65:01:f3:1b
         media: autoselect status: active
         supported media: autoselect

### wd command line tool status

/Users/ffoti/Desktop/wireless dirver stuff/Utilities/Troubleshooting 
Info.command: WirelessConfig: command not found
logout
[Process completed]