[Wirelessdriver-support] was working fine - then not...

[Caryl S. <ca...@ca...>]

Hiya -

My card/driver have been working fine for weeks and then this morning seemed
to choke and lose the signal (while I was FTPing with Transmit - which I've
done plenty of times).

I restarted to no avail - I then uninstalled everything and reinstalled the
driver (twice).  Still no signal when I enter in my ESSID.  My router is
fine - I put the wireless card into my WIN2K laptop and it works fine.

Here's my troubleshooting info - Please send any suggestions my way.

thanks for the development on this project - before today I had not a
complaint in the world...

-caryl


### system info

ProductName:    Mac OS X
ProductVersion: 10.2.1
BuildVersion:   6D52
Darwin caryl-mac.local. 6.1 Darwin Kernel Version 6.1: Fri Sep  6 23:24:34
PDT 2002; root:xnu/xnu-344.2.obj~2/RELEASE_PPC  Power Macintosh powerpc
ppc750

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 Oct 29 07:49 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 Jul 27 13:22 IOPCCardFamily.kext
        Path = "/System/Library/PreferencePanes/WirelessDriver
PPane.prefPane"; 

### wirelesscard info

    | |         |   "VersionOneInfo" = ("Lucent
Technologies","WaveLAN/IEEE","V$
    | |           |   "VersionOneInfo" = ("Lucent
Technologies","WaveLAN/IEEE")
    | |       +-o pccard156,2@0,0  <class IOPCCard16Device>
    | |         |   "IOName" = "pccard156,2"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en3: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::202:2dff:fe60:1e7e%en3 prefixlen 64 scopeid 0x4
        inet 169.254.57.244 netmask 0xffff0000 broadcast 169.254.255.255
        ether 00:02:2d:60:1e:7e
        media: <unknown type> (DS11 <full-duplex>) status: active
        supported media: none manual autoselect DS1 <half-duplex> DS1
<full-duplex> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> DS5
<full-duplex> DS11 <half-duplex> DS11 <full-duplex>
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::250:e4ff:fe50:9f3f%en0 prefixlen 64 scopeid 0x5
        ether 00:50:e4:50:9f:3f
        media: autoselect (none) status: inactive
        supported media: none autoselect 10baseT/UTP <half-duplex>
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX <full-duplex>

### wd command line tool status

/Volumes/WirelessDriver beta 5.1/Utilities/Troubleshooting Info.command:
WirelessConfig: command not found