Menu
▾
▴
Fwd: [Wirelessdriver-support] problems - SL-2511CD+
|
From: yuriwho <yu...@ma...> - 2002-10-26 21:52:58
|
I take that back, others have reported success with the card.
From: "Oscar F Hills, MD" <os...@of...>
Date: Sun Oct 20, 2002 3:36:43 PM America/Chicago
To: <wir...@li...>
Subject: Re: [Wirelessdriver-support] Re: High power (200mW) cards work
with OS X.
I am new to this whole thing, and just got my 2511CD PLUS card
yesterday. I
had installed the driver on Friday before I got the card.
I was in exactly the same boat as you with the same machine.
I dumped those pref files and rebooted, to no avail (nor did I expect
anything since I DID have panes, but no new network port) ...
So, I reinstalled the drivers WITH THE CARD PLUGGED IN ... I was
delighted
to see the green triangle blinking when the machine came back up, and
it is
now working.
Us dummys just have to go for the empirical, trial and error approach
for
lack of a better idea ... but if you haven't done it already ... it
worked
for me.
Oscar
Begin forwarded message:
> From: yuriwho <yu...@ma...>
> Date: Sat Oct 26, 2002 4:31:00 PM America/Chicago
> To: Patrick Fowler <pa...@st...>
> Cc: wir...@li...
> Subject: Re: [Wirelessdriver-support] problems - SL-2511CD+
>
> The card does not appear to be supported, assuming you have installer
> the driver correctly. Do any other cards work with the driver? If they
> do the SL-2511CD+ is unsupportable with the current driver as the
> IOName matching info for that card is already in the driver.
>
> Y
> On Thursday, October 24, 2002, at 07:48 PM, Patrick Fowler wrote:
>
>> Hey,
>> I bought a card labeled as the SL-2511CD+, which it is, however it's
>> made by SENAO. Not sure if this is a problem. It doesn't seem to
>> show up in the pref pane.
>>
>> Here's the results of the troubleshooting script:
>>
>>> Last login: Thu Oct 24 17:36:39 on ttyp1
>>> /Users/fatty/Downloads/Troubleshooting\ Info.command; exit
>>> Welcome to Darwin!
>>> [fatty:~] fatty% /Users/fatty/Downloads/Troubleshooting\
>>> Info.command; exit
>>>
>>> ### system info
>>>
>>> ProductName: Mac OS X
>>> ProductVersion: 10.2.1
>>> BuildVersion: 6D52
>>> Darwin fatty.local. 6.1 Darwin Kernel Version 6.1: Fri Sep 6
>>> 23:24:34 PDT 2002; root:xnu/xnu-344.2.obj~2/RELEASE_PPC Power
>>> Macintosh > powerpc
>>> ppc7450
>>>
>>> ### wireless driver files installed
>>>
>>> drwxr-xr-x 3 root wheel 102 Oct 24 17:33 WirelessDriver.kext
>>> drwxr-xr-x 3 root wheel 102 Jul 27 13:22 IOPCCardFamily.kext
>>>
>>> ### wirelesscard info
>>>
>>>
>>> ### network info
>>>
>>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
>>> inet6 ::1 prefixlen 128
>>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
>>> inet 127.0.0.1 netmask 0xff000000
>>> gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
>>> stf0: flags=0<> mtu 1280
>>> en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu
>>> 1500
>>> inet6 fe80::203:93ff:fec2:fcdc%en0 prefixlen 64 scopeid 0x4
>>> ether 00:03:93:c2:fc:dc
>>> media: autoselect (none) status: inactive
>>> supported media: none autoselect 10baseT/UTP <half-duplex>
>>> 10baseT/UTP <half-duplex,hw-loopback> 10baseT/UTP <full-duplex>
>>> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex>
>>> 100baseTX <half-duplex,hw-loopback> 100baseTX <full-duplex>
>>> 100baseTX <full-duplex,hw-loopback> 1000baseTX <full-duplex>
>>> 1000baseTX <full-duplex,hw-loopback> 1000baseTX
>>> <full-duplex,flow-control> 1000baseTX
>>> <full-duplex,flow-control,hw-loopback>
>>> en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu
>>> 1500
>>> inet6 fe80::230:65ff:fe06:e2bc%en1 prefixlen 64 scopeid 0x5
>>> inet 192.168.123.173 netmask 0xffffff00 broadcast
>>> 192.168.123.255
>>> ether 00:30:65:06:e2:bc
>>> media: autoselect status: active
>>> supported media: autoselect
>>>
>>> ### wd command line tool status
>>>
>>> /Users/fatty/Downloads/Troubleshooting Info.command: WirelessConfig:
>>> command not found
>>> logout
>>> [Process completed]
>>
>> also: the ioreg calls suggested in the faq
>>
>>> [fatty:~] fatty% ioreg -l | grep VersionOneInfo
>>> | | "VersionOneInfo" =
>>> ("INTERSIL","HFA384x/IEEE","Version 01.0$
>>> [fatty:~] fatty% ioreg -l | grep pccard
>>> | | +-o pccard156,2@0,0 <class IOPCCard16Device>
>>> | | "IOName" = "pccard156,2"
>>
>> Thanks
>> Pat Fowler
>>
>>
>>
>> -------------------------------------------------------
>> This sf.net email is sponsored by: Influence the future of Java(TM)
>> technology. Join the Java Community Process(SM) (JCP(SM)) program
>> now. http://ads.sourceforge.net/cgi-bin/redirect.pl?sunm0004en
>> _______________________________________________
>> Wirelessdriver-support mailing list
>> Wir...@li...
>> https://lists.sourceforge.net/lists/listinfo/wirelessdriver-support
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: ApacheCon, November 18-21 in
> Las Vegas (supported by COMDEX), the only Apache event to be
> fully supported by the ASF. http://www.apachecon.com
> _______________________________________________
> Wirelessdriver-support mailing list
> Wir...@li...
> https://lists.sourceforge.net/lists/listinfo/wirelessdriver-support
|
