[Wirelessdriver-support] Lucent Silver and Lucent Gold - not seen.

[Dirk-Willem v. G. <di...@we...>]

When trying to use a Lucent Silver (or Gold) card with a TiBook - which
already *has* an apple card; the kernel does not seem to see/pick up the
card in any way; nor show them in dmesg or ifconfig.

Any suggestions as to what to try ? Or is there a fundamental reason why
it would not work if there is already an apple card present ?

Dw

See the dump of the util below:

Last login: Mon Oct 21 16:44:39 on ttyp1
/Users/dirkx/Desktop/Troubleshooting\ Info.command; exit
Welcome to Darwin!
[mobile:~] dirkx% /Users/dirkx/Desktop/Troubleshooting\ Info.command; exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.1
BuildVersion:   6D52
Darwin mobile.webweaving.org 6.1 Darwin Kernel Version 6.1: Fri Sep  6
23:24:34 PDT 2002; root:xnu/xnu-344.2.obj~2/RELEASE_PPC  Power Macintosh
powerpc
ppc7450

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 Jul 27 22:22 IOPCCardFamily.kext

### wirelesscard info

    | |             "VersionOneInfo" = ("Lucent
Technologies","WaveLAN/IEEE","V$
    | |       +-o pccard156,2@0,0  <class IOPCCard16Device>
    | |             "IOName" = "pccard156,2"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
        inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::203:93ff:fe44:c7cc%en0 prefixlen 64 scopeid 0x4
        ether 00:03:93:44:c7:cc
        media: autoselect (none) status: inactive
        supported media: none autoselect 10baseT/UTP <half-duplex>
10baseT/UTP <half-duplex,hw-loopback> 10baseT/UTP <full-duplex>
10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX
<half-duplex,hw-loopback> 100baseTX <full-duplex> 100baseTX
<full-duplex,hw-loopback> 1000baseTX <full-duplex> 1000baseTX
<full-duplex,hw-loopback> 1000baseTX <full-duplex,flow-control> 1000baseTX
<full-duplex,flow-control,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::230:65ff:fe01:e0fb%en1 prefixlen 64 scopeid 0x5
        inet 10.11.0.100 netmask 0xffffff00 broadcast 10.11.0.255
        ether 00:30:65:01:e0:fb
        media: autoselect status: active
        supported media: autoselect

### wd command line tool status

/Users/dirkx/Desktop/Troubleshooting Info.command: WirelessConfig: command
not found
logout
[Process completed]