[Wirelessdriver-support] driver not working with Proxim Harmony?

[Jens M. <ju...@ma...>]

Hi everybody,

I've got a Proxim Harmony and it's listed with "Basic functionality", 
but for me, the prefs panel contents is disabled.
(This is on Jaguar 10.2.1 on a Powerbook G4 @ 400 MHz)

Has anybody got this card running?

Here's the output of the Troubleshooting command:


[jens-powerbook:/Volumes/WirelessDriver beta 5.1/Utilities] jens% 
./Troubleshooting\ Info.command

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.1
BuildVersion:   6D52
Darwin jens-powerbook.no.netopia.com 6.1 Darwin Kernel Version 6.1: Fri 
Sep  6 23:24:34 PDT 2002; root:xnu/xnu-344.2.obj~2/RELEASE_PPC  Power 
Macintosh powerpc
ppc7400

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 Oct 21 13:16 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 Jul 27 22:22 IOPCCardFamily.kext
ls: /Library/PreferencePanes: No such file or directory

### wirelesscard info

     | |             "VersionOneInfo" = ("PROXIM","Harmony 802.11b/LAN 
PC CARD","")
     | |       +-o pccard126,8000@0,0  <class IOPCCard16Device>
     | |             "IOName" = "pccard126,8000"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::230:65ff:fe00:7256%en1 prefixlen 64 scopeid 0x4
         ether 00:30:65:00:72:56
         media: autoselect (<unknown type>) status: inactive
         supported media: autoselect
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::230:65ff:fef9:2b6a%en0 prefixlen 64 scopeid 0x5
         inet 62.128.22.29 netmask 0xffffff80 broadcast 62.128.22.127
         ether 00:30:65:f9:2b:6a
         media: autoselect (100baseTX <half-duplex>) status: active
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <half-duplex,hw-loopback> 10baseT/UTP <full-duplex> 
10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX 
<half-duplex,hw-loopback> 100baseTX <full-duplex> 100baseTX 
<full-duplex,hw-loopback>

### wd command line tool status

2002-10-21 13:27:05.150 WirelessConfig[2882] Iterations: 0
WirelessDriver: Couldn't find a WirelessDriver service in registry - is 
the card loaded?
Usage - WirelessConfig [-showstatus] or WirelessConfig [-showstatus] 
<-netname <network>> [-wepkey <key>] [-keyslot <slot>]
  -netname <name>     Sets the network name - enclose in double quotes
                       if your network contains a space.

  -wepkey <hex key>   Sets your network key, if ommited the network is
                       assumed to not have wep.

  -keyslot <[1-4]>    Sets which keyslot to have your key in. If
                       ommited keyslot 1 is assumed.

  -status             Prints out the network information, includes
                       signal strength.

  -writeprefs         Writes out the options to the preference file in   
                    
~/Library/Preferences/org.noncontinuous.wirelessdriver

With no options set or just the status, WirelessConfig will look for 
the preferences made by the preference pane in 
~/Library/Preferences/org.noncontinuous.WirelessDriver.