[Wirelessdriver-support] Belkin PC card

[James G. <jga...@co...>]

Hi,
I couldn't find any detailed info about this. I installed the b5 driver for
Jaguar on a Pismo Powerbook running OS X 10.2.1. I have the Belkin F5D6020
card (about $50!) and was able to get it to be recognized by the Wireless
Config app and preference, with decent signal strength on the meter, but I
cannot get it to connect to my network either via DHCP or with manual
configuation that is identical to my Airport card, which works fine. I've
seen on this forum that some people have been able to get this card to work,
but for me no joy. 
TIA,
Jim

Here's the result from the trouble shooting session:

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.1
BuildVersion:   6D52
Darwin James-Garberns-Computer.local. 6.1 Darwin Kernel Version 6.1: Fri Sep
6 23:24:34 PDT 2002; root:xnu/xnu-344.2.obj~2/RELEASE_PPC  Power Macintosh
powerpc
ppc750

### wireless driver files installed

drwxr-xr-x    3 root      wheel   102 Oct 20 10:58 WirelessDriver.kext
drwxr-xr-x    3 root      wheel   102 Sep  9  2001 IOPCCardFamily.kext

### wirelesscard info

    | |         |   "VersionOneInfo" = ("Belkin","11Mbps Wireless Notebook
Netw$
    | |       +-o pccard156,2@0,0  <class IOPCCard16Device>
    | |         |   "IOName" = "pccard156,2"
    | |           |   "IONameMatch" =
("pccard156,2","pccard1eb,807","pccard274$
    | |           |   "IONameMatched" = "pccard156,2"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
        inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::230:65ff:fe16:80cf%en1 prefixlen 64 scopeid 0x4
        ether 00:30:65:16:80:cf
        media: autoselect (<unknown type>) status: inactive
        supported media: autoselect
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::230:65ff:fe53:4714%en0 prefixlen 64 scopeid 0x5
        ether 00:30:65:53:47:14
        media: autoselect (none) status: inactive
        supported media: none autoselect 10baseT/UTP <half-duplex>
10baseT/UTP <half-duplex,hw-loopback> 10baseT/UTP <full-duplex> 10baseT/UTP
<full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX
<half-duplex,hw-loopback> 100baseTX <full-duplex> 100baseTX
<full-duplex,hw-loopback>
en2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::230:bdff:fe61:dbd3%en2 prefixlen 64 scopeid 0x8
        inet 192.168.2.127 netmask 0xffffff00 broadcast 192.168.2.255
        ether 00:30:bd:61:db:d3
        media: <unknown type> (DS11 <full-duplex>) status: active
        supported media: none manual autoselect DS1 <half-duplex> DS1
<full-duplex> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> DS5
<full-duplex> DS11 <half-duplex> DS11 <full-duplex>

### wd command line tool status

/Users/jamesgar/Downloads/Troubleshooting Info.command: WirelessConfig:
command not found
logout
[Process completed]