Re: [Wirelessdriver-support] Powerbook Titanium +Jaguar + Orinoco silver = No Go :-((

[<ard...@xs...>]

>Due to particularly serious distance problems with 11b in France, I am
>trying to use an orinoco silver on a titanium running Jaguar. I installed
>the appropriate driver and nothing is happening.
>Can anyone shed light on loading the card?
>WirelessConfig complains:
>"Couldn't find a WirelessDriver service in Registry - is the card loaded?"
>Running "ifconfig -a" show that the card is not even recognized.
>
>The driver obviously recognizes the card since the logo on the menu line
>indicates that the card is from Lucent Technologies.

I have installed the software in a similar setup (be it a gold card 
rather than a silver). I noticed the icon in the menu bar prior to 
installing the software. Possibly, it is Jaguar that shows the icon 
by itself, not the driver doing it.

Strangely enough, I have had to check the 'driver' line in the 
installer program (choose the special installing button when running 
the installer). It appeared that only the two lower lines of the 
three installable items were checked. Make sure that this is not the 
case with you, and that upon installing, you install all three items.

Since I discovered this, the orinoco works like a charm, putting 
spells on my Airport Base station from a range that I could not have 
hoped to dream of when using the built-in airport card. The only 
'drawback' is that Appletalk is only active on one of the cards. 
TCP/IP runs happily on both cards simultaneously, with each card 
having its own IP address from the DHCP server in the Airport base 
station. Very funny.

Cheers, Ard (from the couch in the living ;-)