[Wirelessdriver-support] Can't connect Wallstreet G3 w/ Orinocco to Airport

[<jrc...@ma...>]

Can't seem to connect a Wallstreet Powerbook G3 wsith an Orinocco Gold 
Card to an new dual ethernet Airport base station. Running OSX1.5. Works 
fine in OS9. Have tried both a closed and an open network. Everything 
seems to install ok. Network finds the card, I go to wireless config and 
type network name, but it doesn't connect, even after a restart. Have 
been careful to go through the FAQ's and tried suggestions there, re 
static ip, etc. to no avail. Help!

Jack Connick
Jac...@Ya...

----- Results of Troubleshooting
[localhost:~] jackconn% /Volumes/WirelessDriver\ 1.0.0\ Beta\ 
4/utilities/Troubleshooting\ Info.command; exit
### kext versions

Password:
Id Refs Address    Size       Wired      Name (Version) <Linked Against>
41    2 0xf796000  0x1e000    0x1d000    com.apple.iokit.IOPCCardFamily 
(1.1.3) <14>
Id Refs Address    Size       Wired      Name (Version) <Linked Against>
50    0 0xf88d000  0xa000     0x9000     
org.noncontiguous.WirelessDriver (1.0.0b4) <14 41 43>

### system info

ProductName:    Mac OS X
ProductVersion: 10.1.5
BuildVersion:   5S60a
Darwin localhost 5.5 Darwin Kernel Version 5.5: Thu May 30 14:51:26 PDT 
2002; root:xnu/xnu-201.42.3.obj~1/RELEASE_PPC  Power Macintosh powerpc
ppc750

### wireless driver files installed

/Volumes/WirelessDriver 1.0.0 Beta 4/utilities/Troubleshooting 
Info.command: command not found: grep [15]
/Volumes/WirelessDriver 1.0.0 Beta 4/utilities/Troubleshooting 
Info.command: command not found: grep [16]
/Volumes/WirelessDriver 1.0.0 Beta 4/utilities/Troubleshooting 
Info.command: command not found: grep [17]
/Volumes/WirelessDriver 1.0.0 Beta 4/utilities/Troubleshooting 
Info.command: command not found: grep [18]
/Volumes/WirelessDriver 1.0.0 Beta 4/utilities/Troubleshooting 
Info.command: command not found: defaults [19]
/Volumes/WirelessDriver 1.0.0 Beta 4/utilities/Troubleshooting 
Info.command: command not found: grep [19]

### wirelesscard info

/Volumes/WirelessDriver 1.0.0 Beta 4/utilities/Troubleshooting 
Info.command: command not found: grep [23]
/Volumes/WirelessDriver 1.0.0 Beta 4/utilities/Troubleshooting 
Info.command: command not found: grep [24]

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet 127.0.0.1 netmask 0xff000000
en1: flags=8863<UP,BROADCAST,b6,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet 169.254.108.29 netmask 0xffff0000 broadcast 169.254.255.255
         ether 00:02:2d:60:22:7f
         media: <unknown type> (DS11 <full-duplex>) status: active
         supported media: none manual autoselect DS1 <half-duplex> DS1 
<full-duplex> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> DS5 
<full-duplex> DS11 <half-duplex> DS11 <full-duplex>
en0: flags=8863<UP,BROADCAST,b6,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet 10.0.1.3 netmask 0xffffff00 broadcast 10.0.1.255
         ether 00:05:02:91:71:18
         media: autoselect (10baseT/UTP <half-duplex>) status: active
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX <full-duplex>

### wd command line tool status

2002-09-29 21:53:35.596 WirelessConfig[445] Iterations: 1
Network Name: The Rory Network, successful: Y
2002-09-29 21:53:35.742 WirelessConfig[445] NO TO WEP
Network Name: The Rory Network, successful: Y
Status:
Network: The Rory Network
WEP Enabled:NO
Signal Strength:27
logout



[Process completed]