Re: [Wirelessdriver-support] (no subject)

[yuriwho <yu...@ma...>]

Try running the installer again

Y
On Friday, September 13, 2002, at 11:09  PM, 
de...@ca... wrote:

> From: de...@ca...
> Reply-To: dk...@no...
> Subject: first post- i'm sure i've something improperly configured
> Cc:
>
>
> dear all:
>
> i've attached my troubleshooting script results.  can somebody tell me 
> what's
> wrong?  i
> never even get the option of the ethernet adapter under show: in the 
> network
> pane.
>
> thanks so much.
>
> yours,
> david.
> .
>
> Last login: Fri Sep 13 22:36:36 on console
> /Users/dkanter/Desktop/Troubleshooting\ Info.commaWelcome to Darwin!
> nd; exit
> [dkanters-lap-steel:~] dkanter% /Users/dkanter/Desktop/Troubleshooting\
> Info.command;
> exit
>
> ### system info
>
> ProductName:    Mac OS X
> ProductVersion: 10.2
> BuildVersion:   6C115
> Darwin dkanters-lap-steel.local. 6.0 Darwin Kernel Version 6.0: Sat 
> Jul 27
> 13:18:52 PDT
> 2002; root:xnu/xnu-344.obj~1/RELEASE_PPC  Power Macintosh powerpc
> ppc7400
>
> ### wireless driver files installed
>
> drwxr-xr-x    3 root  wheel   102 Sep 13 22:33 WirelessDriver.kext
> drwxr-xr-x    3 root  wheel   102 Jul 27 15:22 IOPCCardFamily.kext
>
> ### wirelesscard info
>
>     | |         |   "VersionOneInfo" = ("Lucent
> Technologies","WaveLAN/IEEE","V$
>     | |           |   "VersionOneInfo" = ("Lucent 
> Technologies","WaveLAN/IEEE")
>     | |       +-o pccard156,2@0,0  <class IOPCCard16Device>
>     | |         |   "IOName" = "pccard156,2"
>
> ### network info
>
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
>         inet6 ::1 prefixlen 128
>         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
>         inet 127.0.0.1 netmask 0xff000000
> gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
> stf0: flags=0<> mtu 1280
> en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu
> 1500
>         inet6 fe80::230:65ff:fe1a:5c92%en1 prefixlen 64 scopeid 0x4
>         inet 10.0.1.2 netmask 0xffffff00 broadcast 10.0.1.255
>         ether 00:30:65:1a:5c:92
>         media: autoselect status: active
>         supported media: autoselect
> en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu
> 1500
>         inet6 fe80::230:65ff:fecd:c8d8%en0 prefixlen 64 scopeid 0x5
>         ether 00:30:65:cd:c8:d8
>         media: autoselect (none) status: inactive
>         supported media: none autoselect 10baseT/UTP <half-duplex> 
> 10baseT/UTP
> <half-
> duplex,hw-loopback> 10baseT/UTP <full-duplex> 10baseT/UTP 
> <full-duplex,hw-
> loopback> 100baseTX <half-duplex> 100baseTX <half-duplex,hw-loopback>
> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
> en2: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
>         tunnel inet  -->
>         ether 00:02:2d:65:8c:b5
>         media: <unknown type>
>         supported media: none manual autoselect DS1 <half-duplex> DS1
> <full-duplex>
> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> DS5 
> <full-duplex> DS11
> <half-
> duplex> DS11 <full-duplex>
>
> ### wd command line tool status
>
> /Users/dkanter/Desktop/Troubleshooting Info.command: WirelessConfig: 
> command
> not
> found
> logout
> [Process completed]
>
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _______________________________________________
> Wirelessdriver-support mailing list
> Wir...@li...
> https://lists.sourceforge.net/lists/listinfo/wirelessdriver-support