[Wirelessdriver-support] (no subject)

[<de...@ca...>]

From: de...@ca...
Reply-To: dk...@no...
Subject: first post- i'm sure i've something improperly configured
Cc: 


dear all: 

i've attached my troubleshooting script results.  can somebody tell me what's 
wrong?  i 
never even get the option of the ethernet adapter under show: in the network 
pane. 

thanks so much. 

yours, 
david. 
. 

Last login: Fri Sep 13 22:36:36 on console 
/Users/dkanter/Desktop/Troubleshooting\ Info.commaWelcome to Darwin! 
nd; exit 
[dkanters-lap-steel:~] dkanter% /Users/dkanter/Desktop/Troubleshooting\ 
Info.command; 
exit 

### system info 

ProductName:    Mac OS X 
ProductVersion: 10.2 
BuildVersion:   6C115 
Darwin dkanters-lap-steel.local. 6.0 Darwin Kernel Version 6.0: Sat Jul 27 
13:18:52 PDT 
2002; root:xnu/xnu-344.obj~1/RELEASE_PPC  Power Macintosh powerpc 
ppc7400 

### wireless driver files installed 

drwxr-xr-x    3 root  wheel   102 Sep 13 22:33 WirelessDriver.kext 
drwxr-xr-x    3 root  wheel   102 Jul 27 15:22 IOPCCardFamily.kext 

### wirelesscard info 

    | |         |   "VersionOneInfo" = ("Lucent 
Technologies","WaveLAN/IEEE","V$ 
    | |           |   "VersionOneInfo" = ("Lucent Technologies","WaveLAN/IEEE") 
    | |       +-o pccard156,2@0,0  <class IOPCCard16Device> 
    | |         |   "IOName" = "pccard156,2" 

### network info 

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 
        inet6 ::1 prefixlen 128 
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
        inet 127.0.0.1 netmask 0xff000000 
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 
stf0: flags=0<> mtu 1280 
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 
1500 
        inet6 fe80::230:65ff:fe1a:5c92%en1 prefixlen 64 scopeid 0x4 
        inet 10.0.1.2 netmask 0xffffff00 broadcast 10.0.1.255 
        ether 00:30:65:1a:5c:92 
        media: autoselect status: active 
        supported media: autoselect 
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 
1500 
        inet6 fe80::230:65ff:fecd:c8d8%en0 prefixlen 64 scopeid 0x5 
        ether 00:30:65:cd:c8:d8 
        media: autoselect (none) status: inactive 
        supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP 
<half- 
duplex,hw-loopback> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw- 
loopback> 100baseTX <half-duplex> 100baseTX <half-duplex,hw-loopback> 
100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 
en2: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500 
        tunnel inet  --> 
        ether 00:02:2d:65:8c:b5 
        media: <unknown type> 
        supported media: none manual autoselect DS1 <half-duplex> DS1 
<full-duplex> 
DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> DS5 <full-duplex> DS11 
<half- 
duplex> DS11 <full-duplex> 

### wd command line tool status 

/Users/dkanter/Desktop/Troubleshooting Info.command: WirelessConfig: command 
not 
found 
logout 
[Process completed]