[Wirelessdriver-support] No EN1 option after installing

[Eric L. <elu...@ma...>]

Last login: Mon Sep  9 07:52:11 on console
/Users/eric/Online\ Downloads/Troubleshooting\ InfWelcome to Darwin!
o.command; exit
[Erics-G4:~] eric% /Users/eric/Online\ Downloads/Troubleshooting\ 
Info.command; exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.2
BuildVersion:   6C115
Darwin Erics-G4.local. 6.0 Darwin Kernel Version 6.0: Sat Jul 27 
13:18:52 PDT 2002; root:xnu/xnu-344.obj~1/RELEASE_PPC  Power Macintosh 
powerpc
ppc7450

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 Jul 27 16:22 IOPCCardFamily.kext
ls: /Library/PreferencePanes: No such file or directory

### wirelesscard info

I've tried a couple times to carefully load the jaguar beta, but I 
don't seem to have the EN1 option in the Network prefs to complete the 
setup.  Any suggestions?

Thanks,
Eric Lundberg


### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::203:93ff:fe57:653e%en0 prefixlen 64 scopeid 0x4
         ether 00:03:93:57:65:3e
         media: autoselect (none) status: inactive
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <half-duplex,hw-loopback> 10baseT/UTP <full-duplex> 
10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX 
<half-duplex,hw-loopback> 100baseTX <full-duplex> 100baseTX 
<full-duplex,hw-loopback> 1000baseTX <full-duplex> 1000baseTX 
<full-duplex,hw-loopback> 1000baseTX <full-duplex,flow-control> 
1000baseTX <full-duplex,flow-control,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::230:65ff:fe14:6b80%en1 prefixlen 64 scopeid 0x5
         inet 10.0.1.29 netmask 0xffffff00 broadcast 10.0.1.255
         ether 00:30:65:14:6b:80
         media: autoselect status: active
         supported media: autoselect

### wd command line tool status

/Users/eric/Online Downloads/Troubleshooting Info.command: 
WirelessConfig: command not found
logout
[Process completed]