Re: [Wirelessdriver-support] Too picky

[Gregory J. M. <sum...@ea...>]

Tom, I am also running a G3 Powerbook/Lucent Silver. When I installed 
the 5.1 software I could see the en1  in the port window but it was 
grayed out and I could not get a connection. I decided to put in a 
brand new "location" in which only the en1 was listed. I clicked on it 
to highlight it and then restarted the whole thing. When I came back up 
I was connected. I could also connect on any other location where the 
en1 showed up as a possible port. Don't know why but it worked.  Good 
luck
On Wednesday, September 4, 2002, at 12:57 PM, Tom Tokoph wrote:

> I tried that at one point in time.  I tried unplugging the airport as 
> well.  I could try it again, but the internet is working just fine 
> plugged into the ethernet port-- so I don't think that can be it.
> Tom
>
> On Wednesday, September 4, 2002, at 08:15  AM, dstubb wrote:
>
>>> Rob & All-
>>> Still no luck with my G3 Powerbook 300/ Lucent Silver.  I've fiddled
>>> like crazy to no avail.  As I've mentioned, I have a strong signal 
>>> with
>>> the Network Port en(1) showing up as desired with automatic settings
>>> through DHCP, but still no access to the internet.
>>> Anyone figure out what my problem may be?
>>> Thanks again all-
>>> Tom
>>
>> Did you try something silly like unplugging your cable modem and 
>> plugging
>>  it back it to reset it?
>>
>> -- 
>> David W. Stubblebine
>> ds...@ya...
>>
>>
>
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by: OSDN - Tired of that same old
> cell phone?  Get a new here for FREE!
> https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
> _______________________________________________
> Wirelessdriver-support mailing list
> Wir...@li...
> https://lists.sourceforge.net/lists/listinfo/wirelessdriver-support
>