[Wirelessdriver-support] Can my Cards be supported?

[Chi L. L. <lo...@jo...>]

### system info

ProductName:    Mac OS X
ProductVersion: 10.2
BuildVersion:   6C115
Darwin Lok-Powerbook-G3.local. 6.0 Darwin Kernel Version 6.0: Sat Jul 27 13:18:52 
PDT 2002; root:xnu/xnu-344.obj~1/RELEASE_PPC  Power Macintosh powerpc
ppc750

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 Jul 28 04:22 IOPCCardFamily.kext
ls: /Library/PreferencePanes: No such file or directory
2002-09-01 03:25:37.231 defaults[389] 
The domain/default pair of (loginwindow, AutoLaunchedApplicationDictionary) does not 
exist

### wirelesscard info


### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128 
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
        inet 127.0.0.1 netmask 0xff000000 
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::230:65ff:fe48:860c%en0 prefixlen 64 scopeid 0x4 
        inet 192.168.0.104 netmask 0xffffff00 broadcast 192.168.0.255
        ether 00:30:65:48:86:0c 
        media: autoselect (100baseTX <full-duplex>) status: active
        supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <half-
duplex,hw-loopback> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-
loopback> 100baseTX <half-duplex> 100baseTX <half-duplex,hw-loopback> 100baseTX <
full-duplex> 100baseTX <full-duplex,hw-loopback>

### wd command line tool status

(2)

### system info

ProductName:    Mac OS X
ProductVersion: 10.2
BuildVersion:   6C115
Darwin Lok-Powerbook-G3.local. 6.0 Darwin Kernel Version 6.0: Sat Jul 27 13:18:52 
PDT 2002; root:xnu/xnu-344.obj~1/RELEASE_PPC  Power Macintosh powerpc
ppc750

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 Jul 28 04:22 IOPCCardFamily.kext
ls: /Library/PreferencePanes: No such file or directory
2002-09-01 03:34:43.454 defaults[411] 
The domain/default pair of (loginwindow, AutoLaunchedApplicationDictionary) does not 
exist

### wirelesscard info

    | |             "VersionOneInfo" = ("3Com","3CRSHPW_96 Wireless LAN PC Card$
    | |       +-o pccard101,696@0,0  <class IOPCCard16Device>
    | |             "IOName" = "pccard101,696"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128 
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
        inet 127.0.0.1 netmask 0xff000000 
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::230:65ff:fe48:860c%en0 prefixlen 64 scopeid 0x4 
        inet 192.168.0.104 netmask 0xffffff00 broadcast 192.168.0.255
        ether 00:30:65:48:86:0c 
        media: autoselect (100baseTX <full-duplex>) status: active
        supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <half-
duplex,hw-loopback> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-
loopback> 100baseTX <half-duplex> 100baseTX <half-duplex,hw-loopback> 100baseTX <
full-duplex> 100baseTX <full-duplex,hw-loopback>

### wd command line tool status