[Wirelessdriver-support] WEP not working on D-Link card

[Kevin W. <ke...@ga...>]

I setup the driver under Jaguar, and it works without WEP, but it 
doesn't work with WEP. I ran the troubleshooting script and here are the 
results. I added the info I could get from the WirelessConfig.app 
manually since it didn't want to run from the script.

Any ideas on how to fix it?

Thanks,
Kevin


### kext versions

Password:
sudo: kmodstat: command not found
sudo: kmodstat: command not found

### system info

ProductName:    Mac OS X
ProductVersion: 10.2
BuildVersion:   6C115
Darwin Beccas-Computer.local. 6.0 Darwin Kernel Version 6.0: Sat Jul 27 
13:18:52 PDT 2002; root:xnu/xnu-344.obj~1/RELEASE_PPC  Power Macintosh 
powerpc
ppc750

### wireless driver files installed

dr-xr-xr-x    3 root   wheel   102 Mar 20 11:45 WirelessDriver.kext
drwxr-xr-x    3 root   wheel   102 Jul 27 15:22 IOPCCardFamily.kext
drwxr-xr-x   3 root   admin   102 Aug 21 17:25 WirelessDriver 
PPane.prefPane
2002-08-21 18:26:22.343 defaults[611]
The domain/default pair of (loginwindow, 
AutoLaunchedApplicationDictionary) does not exist

### wirelesscard info

     |           |   "VersionOneInfo" = ("D","Link DWL-650 11Mbps WLAN 
Card","Ve$
     |     +-o pccard@13  <class IOPCIDevice>
     |     | |   "device_type" = <"pccard">
     |     | |   "name" = <"pccard">
     |     +-o pccard@13,1  <class IOPCIDevice>
     |       |   "device_type" = <"pccard">
     |       |   "name" = <"pccard">
     |         +-o pccard156,2@0,0  <class IOPCCard16Device>
     |           |   "IOName" = "pccard156,2"
     |             |   "IONameMatch" = 
("pccard274,1613","pccard274,1612","pccar$
     |             |   "IONameMatched" = "pccard156,2"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::205:2ff:fe9f:41b2%en0 prefixlen 64 scopeid 0x4
         ether 00:05:02:9f:41:b2
         media: autoselect (none) status: inactive
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX <full-duplex>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::205:5dff:feda:c7e3%en1 prefixlen 64 scopeid 0x5
         inet 192.168.0.4 netmask 0xffffff00 broadcast 192.168.0.255
         ether 00:05:5d:da:c7:e3
         media: <unknown type> (DS11 <full-duplex>) status: active
         supported media: none manual autoselect DS1 <half-duplex> DS1 
<full-duplex> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> DS5 
<full-duplex> DS11 <half-duplex> DS11 <full-duplex>

### wd command line tool status

/Users/becca/Desktop/Troubleshooting Info.command: WirelessConfig: 
command not found

2002-08-21 18:38:17.849 WirelessConfig[776] Iterations: 1
Network Name: ugate, successful: Y
2002-08-21 18:38:17.862 WirelessConfig[776] NO TO WEP
Network Name: ugate, successful: Y
2002-08-21 18:39:07.053 WirelessConfig[776] *** -[UCWDAccess 
writePreferencesNetwork:withWEP:withKey:]: selector not recognized
2002-08-21 18:39:07.087 WirelessConfig[776] *** -[UCWDAccess 
writePreferencesNetwork:withWEP:withKey:]: selector not recognized