[Wirelessdriver-support] Compaq WL 1100

[Jean-Claude DE S. <jc....@wa...>]

Welcome to Darwin!
/Volumes/Allegro/Dechargement/Troubleshooting\ Info.command; exit
[localhost:~] pbg4% /Volumes/Allegro/Dechargement/Troubleshooting\ 
Info.command; exit
### kext versions

Password:
Id Refs Address    Size       Wired      Name (Version) <Linked Against>
41    1 0x13611000 0x1e000    0x1d000    com.apple.iokit.IOPCCardFamily 
(1.1.3) <11>
Id Refs Address    Size       Wired      Name (Version) <Linked Against>
61    0 0x13780000 0xa000     0x9000     
org.noncontiguous.WirelessDriver (1.0.0b4) <11 41 45>

### system info

ProductName:    Mac OS X
ProductVersion: 10.1.5
BuildVersion:   5S60
Darwin localhost 5.5 Darwin Kernel Version 5.5: Thu May 30 14:51:26 PDT 
2002; root:xnu/xnu-201.42.3.obj~1/RELEASE_PPC  Power Macintosh powerpc
ppc7400

### wireless driver files installed

drwxrwxrwx    3 root  staff   264 Mar 20 18:45 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   264 May 30 22:53 IOPCCardFamily.kext
drwxr-xr-x   3 root  staff     264 Mar 20 18:46 WirelessDriver 
PPane.prefPane
     {Hide = 0; Path = "/Library/PreferencePanes/WirelessDriver 
PPane.prefPane"; },

### wirelesscard info

     | |         |   "VersionOneInfo" = ("Compaq","Compaq WL110 PC 
Card","Versio$
     | |       +-o pccard156,2@0,0  <class IOPCCard16Device>
     | |         |   "IOName" = "pccard156,2"
     | |           |   "IONameMatched" = "pccard156,2"
     | |           |   "IONameMatch" = 
("pccard274,1613","pccard274,1612","pccar$

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet 127.0.0.1 netmask 0xff000000
en1: flags=8863<UP,BROADCAST,b6,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet 10.0.1.3 netmask 0xffffff00 broadcast 10.0.1.255
         ether 00:02:a5:2e:72:91
         media: <unknown type> (DS11 <full-duplex>) status: active
         supported media: none manual autoselect DS1 <half-duplex> DS1 
<full-duplex> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> DS5 
<full-duplex> DS11 <half-duplex> DS11 <full-duplex>
en0: flags=8822<BROADCAST,b6,SIMPLEX,MULTICAST> mtu 1500
         ether 00:03:93:15:d3:44
         media: autoselect (none) status: inactive
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <half-duplex,hw-loopback> 10baseT/UTP <full-duplex> 
10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX 
<half-duplex,hw-loopback> 100baseTX <full-duplex> 100baseTX <full-
duplex,hw-loopback>

### wd command line tool status

2002-08-13 20:02:46.711 WirelessConfig[602] Iterations: 1
Network Name: compaq, successful: Y
2002-08-13 20:02:46.731 WirelessConfig[602] YES TO WEP
Network Name: compaq, successful: Y
Status:
Network: compaq
WEP Enabled:YES
Signal Strength:105
logout