Menu
▾
▴
[Wirelessdriver-support] Re: Skyline PN473 Trouble with OS X 1.5
|
From: Gregg R. <Gre...@Ne...> - 2002-08-02 14:27:45
|
August 2, 2002
Re: Skyline PN473 Trouble with OS X 1.5
I have not been able to get my Skyline to work with my PBG3 with OS X 1.5=
with=20
the Airport Graphite Base Station. (It worked fine w/ OS 9.2.1.) I have=
tried=20
setting TCP/IP manually according to the FAQ document available from=20
SourceForge and tried setting it using DHCP-auto as I have with other Air=
port=20
machines on the network. I am cable modem attached to the Internet via A=
irport.
I seem to be hung up on the machine IP address of 169.254.207.55 instead =
of=20
getting the Airport assigned IP. I have tried PRAM clear and even dialed=
out via=20
modem to reset the IP=97no luck. The signal strength is fine and the net=
work=20
utility says I get no packet loss.
ANY IDEAS??=20
Trouble Shooting Terminal Output Run on G3 PowerBook:
Welcome to Darwin!
/Volumes/Zip\ 100/Troubleshooting\ Info.command; exit
[localhost:~] rudy% /Volumes/Zip\ 100/Troubleshooting\ Info.command; exit
### kext versions
Password:
Id Refs Address Size Wired Name (Version) <Linked Against>
50 1 0xc8be000 0x1d000 0x1c000 com.apple.iokit.IOPCCardFamily=20
(1.1.0) <14>
Id Refs Address Size Wired Name (Version) <Linked Against>
51 0 0xc91f000 0xa000 0x9000 org.noncontiguous.WirelessDriver=
=20
(1.0.0b4) <14 50 41>
### system info
ProductName: Mac OS X
ProductVersion: 10.1.5
BuildVersion: 5S66
Darwin localhost 5.5 Darwin Kernel Version 5.5: Thu May 30 14:51:26 PDT=20
2002; root:xnu/xnu-201.42.3.obj~1/RELEASE_PPC Power Macintosh powerpc
ppc750
### wireless driver files installed
drwxrwxrwx 3 root staff 264 Mar 20 11:45 WirelessDriver.kext
drwxr-xr-x 3 root staff 264 Sep 9 2001 IOPCCardFamily.kext
drwxr-xr-x 3 root staff 264 Mar 20 11:46 WirelessDriver PPane.prefPan=
e
{Path =3D "/Library/PreferencePanes/WirelessDriver PPane.prefPane/"; =
},=20
{Path =3D "/Library/PreferencePanes/WirelessDriver PPane.prefPane/"; =
},=20
{Path =3D "/Library/PreferencePanes/WirelessDriver PPane.prefPane/"; =
}
### wirelesscard info
| | | "VersionOneInfo" =3D ("INTERSIL","HFA384x/IEEE","Vers=
ion 01.0$
| +-o pccard@13 <class IOPCIDevice>
| | | "device_type" =3D <"pccard">
| | | "name" =3D <"pccard">
| | +-o pccard156,2@1,0 <class IOPCCard16Device>
| | | "IOName" =3D "pccard156,2"
| | | "IONameMatched" =3D "pccard156,2"
| | | "IONameMatch" =3D ("pccard274,1613","pccard274,1612=
","pccar$
| +-o pccard@13,1 <class IOPCIDevice>
| | "device_type" =3D <"pccard">
| | "name" =3D <"pccard">
### network info
lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000=20
en1: flags=3D8863<UP,BROADCAST,b6,RUNNING,SIMPLEX,MULTICAST> mtu=20
1500
inet 169.254.207.55 netmask 0xffff0000 broadcast 169.254.255.255
ether 00:00:c5:09:b0:72=20
media: <unknown type> (DS11 <full-duplex>) status: active
supported media: none manual autoselect DS1 <half-duplex> DS1 <fu=
ll-
duplex> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> DS5 <full-
duplex> DS11 <half-duplex> DS11 <full-duplex>
en0: flags=3D8822<BROADCAST,b6,SIMPLEX,MULTICAST> mtu 1500
ether 00:05:02:cb:ae:19=20
media: autoselect (none) status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex> 10base=
T/
UTP <full-duplex> 100baseTX <half-duplex> 100baseTX <full-duplex>
### wd command line tool status
2002-08-02 08:37:08.771 WirelessConfig[429] Iterations: 1
Network Name: Charter Communications, successful: Y
ret =3D -536870206
ret =3D kIOReturnBadArgument
Network Name: Charter Communications, successful: Y
Status:
Network: Charter Communications
WEP Enabled:NO
Signal Strength:134
logout
[Process completed]
THANKS!
Gregg Rudolph
NetSource America, Inc.
Voice: (952) 423-2285
Cellular: (612) 803-5966
Fax: (952) 423-2286
E-mail: Gre...@Ne...
Web Site: NetSourceAmerica.com
|
