#5 Kernel panic with Cisco VPN 5000
Machine: 300MHz Wallstreet PowerBook G3 with an Orinoco
Silver wireless card running Mac OS 10.2 and version b5 of the
wireless driver. The wireless driver appears to be working fine and
is connected to an original Airport base station.
Steps to Repeat:
1. Install Cisco VPN 5000 5.2.2 and restart.
2. Launch and configure the VPN software.
3. Connect to the VPN server.
Result:
Kernel panic.
### system info
ProductName: Mac OS X
ProductVersion: 10.2.1
BuildVersion: 6D52
Darwin Erich-Champions-Computer.local. 6.1 Darwin Kernel
Version 6.1: Fri Sep 6 23:24:34 PDT 2002; root:xnu/xnu-
344.2.obj~2/RELEASE_PPC Power Macintosh powerpc
ppc750
### wireless driver files installed
drwxr-xr-x 3 root wheel 102 Oct 22 22:19
WirelessDriver.kext
drwxr-xr-x 3 root wheel 102 Jul 27 13:22
IOPCCardFamily.kext
ls: /Library/PreferencePanes: No such file or directory
### wirelesscard info
| | | "VersionOneInfo" = ("Sony Corporation","PCWA-
C100","Version$
| | "VersionOneInfo" = ("U.S. Robotics","XJ/
CC1560","Megahertz $
| +-o pccard@13 <class IOPCIDevice>
| | | "device_type" = <"pccard">
| | | "name" = <"pccard">
| | +-o pccard156,2@1,0 <class IOPCCard16Device>
| | | "IOName" = "pccard156,2"
| | | "IONameMatch" =
("pccard156,2","pccard1eb,807","pccard274$
| | | "IONameMatched" = "pccard156,2"
| +-o pccard@13,1 <class IOPCIDevice>
| | "device_type" = <"pccard">
| | "name" = <"pccard">
| +-o pccard102,2f@0,0 <class IOPCCard16Device>
| | "IOName" = "pccard102,2f"
| | "IOTTYBaseName" = "pccard-modem"
| | "IOTTYBaseName" = "pccard-modem"
| "IOTTYBaseName" = "pccard-modem"
| "IODialinDevice" = "/dev/tty.pccard-modem0"
| "IOCalloutDevice" = "/dev/cu.pccard-modem0"
| "IOTTYDevice" = "pccard-modem0"
### network info
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu
16290
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<
UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST>
mtu 1500
inet6 fe80::250:e4ff:fe80:f15b%en0 prefixlen 64 scopeid 0x4
ether 00:50:e4:80:f1:5b
media: autoselect (none) status: inactive
supported media: none autoselect 10baseT/UTP <half-
duplex> 10baseT/UTP <full-duplex> 100baseTX <half-duplex>
100baseTX <full-duplex>
en1: flags=8863<
UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST>
mtu 1500
inet6 fe80::a00:46ff:fe0a:5a8e%en1 prefixlen 64 scopeid 0x5
inet 10.0.1.12 netmask 0xffffff00 broadcast 10.0.1.255
ether 08:00:46:0a:5a:8e
media: <unknown type> (DS11 <full-duplex>) status: active
supported media: none manual autoselect DS1 <half-
duplex> DS1 <full-duplex> DS2 <half-duplex> DS2 <full-duplex>
DS5 <half-duplex> DS5 <full-duplex> DS11 <half-duplex> DS11 <
full-duplex>
### wd command line tool status
/Users/echampio/Desktop/Troubleshooting Info.command:
WirelessConfig: command not found
logout
