Wale tries to adjust all sound generating processes' peak level to Target-Yellow bar- level. You can change Target to your preferred level.
However, Wale uses windows volume system for now, which means the app only can control volume between 0.0\~1.0. Hence, if you set Target to near 1.0, then Wale could not control volume, because all processes' peak levels are always less than or equal to Target. So, you should lower Target a little. Default Target level is 0.15(-16.5dB).
Caution! Too low Target may cause sudden hugely loud sound. Low Target means quieter output sound from your windows system. Then, you may need to increase the volume of your hardware such as speaker to hear the sound. In this situation, uncontrolled process would make very loud sound caused by some trouble of sound system include unintentional stop of Wale.
Lower the Target to around 0.05(-26dB) on your own risk.
Please be sure to be aware of above Caution!
This setting would be cleared when you update the app.
1. Open user.config file under most latest %userprofile%\Appdata\Local\WALE\Wale.exe~~~\version
2. Find ExcList
paragraph, It should have some strings such as ShellExperienceHost
, Windows Shell Experience Host
.
3. Add new <string>process name which you want to exclude</string>
to inside of ArrayOfString
.
Controls volume of current default render device with mouse wheel on anywhere of master tab. Control step is on small textbox which a left one of two of them.
Click ‘Set Volume’ button to set a volume of current default render device, target volume is on bigger textbox which a right one of two of them.
AlwaysTop(F7): all windows would be always on top
StayOn(F8): keep open the main window
DetailView(F9): more detailed information on session data
Click checkbox or session name to include to or exclude from auto control list.
Click number to cycle values to volume, peak, average peak or relative volume when not detailed mode.
Use mouse wheel to change relative volume of each session.
Relative is kept between -1~1. And Final volume is multiplied by (2^Relative)
.
V+(R-R*V)
(V<V_B)? V+A*V+R ∶ V+B*(V-1) [A=R-R/V_B][B=R*V_B/(V_B-1)]
V+R*1/(K+(1-K)*V-1) [if (K==1&&V==0) reciprocal=99]
V+R*((K+(1-K)*V)^(1/(Log_2(K)))-1) [if (K==0) fixed reciprocal=input][if (K==1) fixed reciprocal=input+R]
Graph: graph for current volume raising function, yellow is base, blue is current, red is new(you want to set)
Average Time: peak collection time to compute average
Min Peak Level: minimum peak to control the session
Average Enabled: On/Off average computing, should always on
Auto Control Enabled: On/Off Auto Session(App) volume control, should always on
Run at Windows Startup: run at windows start
Detailed View: view mode for main window.
Detailed Log: log more detailed information to file. not used, for future
Priority: process priority for Wale.
you can find app log on log tab, detailed log on %appdata%\WaleAudioControl