File | Date | Author | Commit |
---|---|---|---|
case | 2017-03-24 |
![]() |
[ec19ce] fixed attribute |
docu | 2017-01-08 |
![]() |
[1b05bd] label for wifiplug case |
hardware | 2017-05-05 |
![]() |
[c8ec50] specialty for ESP8266 12E |
os | 2019-03-17 |
![]() |
[75e227] Flash complete ESP |
software | 2020-04-04 |
![]() |
[eb1398] Add parameter to disable debugging |
Readme.md | 2016-06-07 |
![]() |
[a0f802] Format updated |
There is only a single button for inputs.
The standard feature is to toggle the relay of the actor.
Next to this feature you can reset the Wifiplug and start a configuration mode.
This configuration mode is entered, because the device was started for the first time, or you pressed the button for more than 3 seconds after startup. (This will be ignored after 30 seconds, so after that, you have to power cycle the plug in order to put it into the configuration mode again)
Above the button, there is a LED. The color represents the state of the Wifiplug.
* red: During the boot procedure, the LED is red glowing for one second
* blue: The configuration mode (see above) is indicated by blinking blue
* green: When searching for the configured network (Wifi), the LED is blinking green.
* off: After the network was found and connected the LED turns off.