Menu
▾
▴
Group
- 0.82
- 0.85
- 0.86
- 0.91
- 0.92
- 0.93
- 0.950
- 0.970
- 0.980
- 0.990
- 1.000
- 1.020
- 1.030
- 1.040
- 1.050
- 1.060
- 1.070
- 1.080
- 1.090
- 1.100
- 1.110
- 1.120
- 1.130
- 1.140
- 1.150
- 1.160
- 1.170
- 1.180
- 1.190
- 1.200
- 1.210
- 1.220
- 1.230
- 1.240
- 1.250
- 1.260
- 1.270
- 1.280
- 1.300
- 1.330
- 1.340
- 1.350
- 1.370
- 1.400
- 1.410
- 1.420
- 1.430
- 1.440
- 1.450
- 1.470
- 1.480
- 1.490
- 1.500
- 1.510
- 1.520
- 1.530
- 1.540
- 1.550
- 1.560
- 1.570
- 1.580
- 1.590
- 1.600
- 1.610
- 1.620
- 1.630
- All
- Other
- 1.640
- 1.650
- 1.660
- 1.670
- 1.680
- 1.690
- 1.700
- 1.710
- 1.720
- 1.730
- 1.740
- 1.750
- 1.760
- 1.770
- 1.780
- 1.790
- 1.791
- 1.800
- 1.801
- 1.810
- 1.820
- 1.830
- 1.840
- 1.850
- 1.860
- 1.870
- 1.880
- 1.890
- 1.900
- 1.910
- 1.920
- 1.930
- 1.940
- 1.950
- 1.960
- 1.962
- 1.970
- 1.972
- 1.973
- 1.974
- 1.979
- 1.980
- 1.981
- 1.982
- 1.983
- 1.984
- 1.990
- 1.991
- 1.993
- 1.994
- 1.995
- 1.996
- 1.997
- 1.998
- 1.999
- 2.000
- 2.003
- 2.010
- 2.011
- 2.012
- 2.013
- 2.020
- 2.021
- 2.100
- 2.101
- 2.102
- 2.103
- 2.104
- 2.105
- 2.110
- 2.111
- 2.200
- 2.201
- 2.202
- 2.300
- 2.302
- 2.303
- 2.400
- 2.401
- 2.402
- 2.500
- 2.501
- 2.510
- 2.520
- 2.600
- 2.610
- 2.620
- 2.621
Searches
Help
#4497 Status monitoring of a software partition
Hello,
With webmin 1.710 on centos6 64 bits, the status monitoring (status/index.cgi) of a software Raid partition (for exemple /dev/md0) show always that's raid is Ok but it's not right. With webmin 1.700 on the same system, the monitoring of a raid partition work well.
Best regards.
What does /proc/mdstat contain on this system when the RAID device is not OK?
cat /proc/mdstat
Personalities : [raid1]
md0 : active raid1 sdb1[1] sda10
204788 blocks super 1.0 [2/1] [_U]
md1 : active raid1 sdb2[1] sda20
1464931196 blocks super 1.1 [2/1] [_U]
bitmap: 6/11 pages [24KB], 65536KB chunk
With webmin 1.700 the monitoring of webmin show the problem. With webmin 1.710 not.
Best regards
Hello,
Have you been able to reproduce the bug ? all version of webmin since 1.700 (also 1.740) have the problem. I use this monitoring for all of my linux servers :-(, is it possible to fix this bug in next release ?
Best regards
Hi Anthony,
I'm investigating this issue, it could be caused by some patches i provided recently, although i'm not yet able to reproduce this (on debian with all the latest raid patches on webmin version 1.660) i'm in doubt it has something to do with the raid patches. I will try to reproduce on a fresh centos 6 64-bit machine.
Kind regards,
Caspar
I found the cause of this - it was due to a redesign of the UI for showing the state of RAID devices introduced by this change : https://github.com/webmin/webmin/commit/86e0cfaf271e1dfc461b0f0d0a4f392b3aaaa973
However, I have submitted a fix in : https://github.com/webmin/webmin/commit/6a30643822c06f492e757b9a5013c2bf3c6e20c7
This will go into the next release.
Well not really, this commit was not the cause and the commit to fix it does not fix the bug described here. I found the real cause in another commit and provided a patch to fix this bug.
Anthony, please apply commit:
https://github.com/webmin/webmin/commit/39bf55a410cfc7678e82be589b4b66adacf3ab2a
and your problem should be solved.
Hi Caspar and Jamie!
I confirm that this commit has solved the problem : https://github.com/webmin/webmin/commit/39bf55a410cfc7678e82be589b4b66adacf3ab2a
Thanks for your work.
Have a nice day