Hi guys
I've recently downloaded Wanem 2.3 . While I was reading the tutorials, I faced with this notification : "
As of 1.2 version, WANem does not provide a correct behaviour when several settings are used together. So for the moment use only one setting at a time. "
In some parts of my project I need to set jitter, loss, and delay together, and then consider my experiment results. So, I would like to know whether the above matter (in bold) still exists in Wanem 2.3 or not?
thanks
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi guys
I've recently downloaded Wanem 2.3 . While I was reading the tutorials, I faced with this notification : "
As of 1.2 version, WANem does not provide a correct behaviour when several settings are used together. So for the moment use only one setting at a time. "
In some parts of my project I need to set jitter, loss, and delay together, and then consider my experiment results. So, I would like to know whether the above matter (in bold) still exists in Wanem 2.3 or not?
thanks
It should work.
Some relevant discussions are here …
*https://sourceforge.net/projects/wanem/forums/forum/725629/topic/1967309
*https://sourceforge.net/projects/wanem/forums/forum/725629/topic/1846712
Regards,
M.K.Nambiar