wanem as router

[John T]

Hi. i have 2 networks
172.16.0.0/24
172.16.1.0/24

and a PC with 2 ethernet cards that runs wanem. i would like to make WANEM route both networks in between. So a PC that is in LAN 172.16.0.0/24 subnet to be able to see a PC in 172.16.1.0/24 subnet. Then WANEM will do its magic and apply its own latency/drop/delays etc
I did enable sysctl.conf to
/etc/sysctl.conf:
net.ipv4.ip_forward = 1
but i am missing the reset of the config.

Is there a way to do that, please?

[naipetrof]

Hi,
For sure it is possible.
You need to  route all your traffic to another interfejs,
You can do this with iptables,see this:
https://www.debuntu.org/how-to-redirecting-network-traffic-to-a-new-ip-using-iptables/
Or this
https://askubuntu.com/questions/907972/route-all-traffic-of-a-machine-through-another-within-a-subnet

Your case is think at the end of second link
SYouYouromething like:

Br, Naipetrof

[naipetrof]

Hi,
For sure it is possible.
You need to  route all your traffic to another interfejs,
You can do this with iptables,see this:
https://www.debuntu.org/how-to-redirecting-network-traffic-to-a-new-ip-using-iptables/
Or this
https://askubuntu.com/questions/907972/route-all-traffic-of-a-machine-through-another-within-a-subnet

Your case is think at the end of second link
SYouYouromething like:

Br, Naipetrof