Configured 2 machines in both subnets with the correct Gateway (WANem).
From both the machines I can ping the WANen on Eth0 and Eth1.
However I can't ping the machine from one subnet to the other subnet and from WANem I can ping all machines in both subnets.
Must I configure something more ? like NAT
Michael
Last edit: KaMiKa 2014-08-25
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Need some help with first setup.
I've installed WANem between 2 subnets.
Eth0 = 10.10.10.120 subnet=24
Eth1 = 57.192.81.120 Subnet=24
Configured 2 machines in both subnets with the correct Gateway (WANem).
From both the machines I can ping the WANen on Eth0 and Eth1.
However I can't ping the machine from one subnet to the other subnet and from WANem I can ping all machines in both subnets.
Must I configure something more ? like NAT
Michael
Last edit: KaMiKa 2014-08-25