Menu
▾
▴
vtd-xml-users
|
From: Harbhanu <har...@hu...> - 2007-05-15 06:14:17
|
Hi, Currently I am using Vtd-XML version 2.0. I want to use it on windows..VC-6. Even i think the problem must be pertaining to change of Long...but don't know the exact source. When I use Long typedef as long... Line Number: 14 Offset: 6 parse exception e ==> Parse exception in parse() Ending tag error: Start/ending tag mismatch When I use Long typedef as __int64.. Line Number: 47 Offset: 1 parse exception e ==> Parse exception in parse() Other Error: XML not terminated properly Did u do any change for long long in your code ??.. In my case it will result in compilation errors.... Please try after doing this change in your code.are you also getting similar problem or there is some configuration related issue. Regards, Harbhanu _____ From: Jimmy Zhang [mailto:cra...@co...] Sent: Tuesday, May 15, 2007 12:13 PM To: har...@hu... Cc: vtd...@li... Subject: soap.c and soap2.xml I tried the same code today and could not duplicate this issue. I am using VC 2003... but that should not matter... What version of VTD-XML are you using? Changing Long to long will not work because a long is 32 bit, a Long is 64-bit... can you make file on Linux? ======================================== Hi, I am trying to use the C version of VTD-XML. I tried executing the test program given (the SOAP example)... <http://vtd-xml.sourceforge.net/codeSample/cs4.html> http://vtd-xml.sourceforge.net/codeSample/cs4.html [using soap.c soap2.xml] But i am getting this error.... Line Number: 14 Offset: 6 parse exception e ==> Parse exception in parse() Ending tag error: Start/ending tag mismatch I am using VC 6 on Win2k... When i tried compilig the project... i got this error error C2632: 'long' followed by 'long' is illegal So.. i modified the typedef for Long to have only long... Apart from this i didn't any other change .... Any clue about the problem.... How should i solve the compilation error And if the change is correct... then what else can be the problem... In case someone has a working example ... please share it... Thanks !! Regards |
|
From: Harbhanu <har...@hu...> - 2007-05-16 02:22:49
|
Yes.. now the exception is not there..after using any of the suggested
solutions . ("rb' for binary mode)
What was the problem??? Was it regarding the legth mismatch between the
actual length a the length passed..
Now, the evaluation is not correct.it works for the root selection..but when
I execute the original expression . the result is empty...
Any clues??
Thanks for the prompt replies..expecting the similar level of activity n
promptness in this mailing list!!
Regards,
Harbhanu
_____
From: Jimmy Zhang [mailto:cra...@co...]
Sent: Tuesday, May 15, 2007 3:58 PM
To: Harbhanu
Cc: vtd...@li...
Subject: Re: soap.c and soap2.xml
I think you should use __int64, to fix the parse exception there are
two ways, one is to fopen() the XML doc using the "ro" instead of "r,"
this is to treat the XML as binary data...
the other way is to assign i (an int) the return value of fread(),
so instead of "fread(...)," do "i=fread(...)."
Either one should fix the problem...
----- Original Message -----
From: Harbhanu <mailto:har...@hu...>
To: 'Jimmy Zhang' <mailto:cra...@co...>
Cc: vtd...@li...
Sent: Monday, May 14, 2007 11:13 PM
Subject: RE: soap.c and soap2.xml
Hi,
Currently I am using Vtd-XML version 2.0.
I want to use it on windows..VC-6.
Even i think the problem must be pertaining to change of Long...but don't
know the exact source.
When I use Long typedef as long...
Line Number: 14 Offset: 6
parse exception e ==> Parse exception in parse()
Ending tag error: Start/ending tag mismatch
When I use Long typedef as __int64..
Line Number: 47 Offset: 1
parse exception e ==> Parse exception in parse()
Other Error: XML not terminated properly
Did u do any change for long long in your code ??.. In my case it will
result in compilation errors....
Please try after doing this change in your code.are you also getting similar
problem or there is some configuration related issue.
Regards,
Harbhanu
_____
From: Jimmy Zhang [mailto:cra...@co...]
Sent: Tuesday, May 15, 2007 12:13 PM
To: har...@hu...
Cc: vtd...@li...
Subject: soap.c and soap2.xml
I tried the same code today and could not duplicate this issue. I am
using VC 2003... but that should not matter...
What version of VTD-XML are you using? Changing Long to long
will not work because a long is 32 bit, a Long is 64-bit...
can you make file on Linux?
========================================
Hi,
I am trying to use the C version of VTD-XML.
I tried executing the test program given (the SOAP example)...
<http://vtd-xml.sourceforge.net/codeSample/cs4.html>
http://vtd-xml.sourceforge.net/codeSample/cs4.html [using soap.c soap2.xml]
But i am getting this error....
Line Number: 14 Offset: 6
parse exception e ==> Parse exception in parse()
Ending tag error: Start/ending tag mismatch
I am using VC 6 on Win2k...
When i tried compilig the project... i got this error
error C2632: 'long' followed by 'long' is illegal
So.. i modified the typedef for Long to have only long...
Apart from this i didn't any other change ....
Any clue about the problem....
How should i solve the compilation error
And if the change is correct... then what else can be the problem...
In case someone has a working example ... please share it...
Thanks !!
Regards
|
|
From: Jimmy Z. <cra...@co...> - 2007-05-16 03:14:54
|
Well, yes, you have to call setDoc with the actuall content length... when "r", VC replaces /r/n with /n so the file appears shorter... What expression?=20 Is it = declareXPathNameSpace(ap,L"ns1",Lhttp://www.w3.org/2003/05/soap-envelope)= ;? I tried it and it worked for me... ----- Original Message -----=20 From: Harbhanu=20 To: 'Jimmy Zhang'=20 Cc: vtd...@li...=20 Sent: Tuesday, May 15, 2007 7:22 PM Subject: RE: soap.c and soap2.xml Yes.. now the exception is not there..after using any of the suggested = solutions . ("rb' for binary mode) What was the problem??? Was it regarding the legth mismatch between = the actual length a the length passed.. Now, the evaluation is not correct.it works for the root = selection..but when I execute the original expression . the result is = empty... Any clues?? Thanks for the prompt replies..expecting the similar level of activity = n promptness in this mailing list!! Regards, Harbhanu -------------------------------------------------------------------------= ----- From: Jimmy Zhang [mailto:cra...@co...]=20 Sent: Tuesday, May 15, 2007 3:58 PM To: Harbhanu Cc: vtd...@li... Subject: Re: soap.c and soap2.xml I think you should use __int64, to fix the parse exception there are two ways, one is to fopen() the XML doc using the "ro" instead of "r," this is to treat the XML as binary data... the other way is to assign i (an int) the return value of fread(), so instead of "fread(...)," do "i=3Dfread(...)." Either one should fix the problem... ----- Original Message -----=20 From: Harbhanu=20 To: 'Jimmy Zhang'=20 Cc: vtd...@li...=20 Sent: Monday, May 14, 2007 11:13 PM Subject: RE: soap.c and soap2.xml Hi, Currently I am using Vtd-XML version 2.0. I want to use it on windows..VC-6. Even i think the problem must be pertaining to change of Long...but = don't know the exact source. When I use Long typedef as long... Line Number: 14 Offset: 6 parse exception e =3D=3D> Parse exception in parse() Ending tag error: Start/ending tag mismatch When I use Long typedef as __int64.. Line Number: 47 Offset: 1 parse exception e =3D=3D> Parse exception in parse() Other Error: XML not terminated properly Did u do any change for long long in your code ??.. In my case it = will result in compilation errors.... Please try after doing this change in your code.are you also getting = similar problem or there is some configuration related issue. Regards, Harbhanu -------------------------------------------------------------------------= --- From: Jimmy Zhang [mailto:cra...@co...]=20 Sent: Tuesday, May 15, 2007 12:13 PM To: har...@hu... Cc: vtd...@li... Subject: soap.c and soap2.xml I tried the same code today and could not duplicate this issue. I am using VC 2003... but that should not matter... What version of VTD-XML are you using? Changing Long to long will not work because a long is 32 bit, a Long is 64-bit... can you make file on Linux? = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Hi,=20 I am trying to use the C version of VTD-XML.=20 =20 I tried executing the test program given (the SOAP example)...=20 http://vtd-xml.sourceforge.net/codeSample/cs4.html [using soap.c = soap2.xml]=20 =20 But i am getting this error....=20 =20 Line Number: 14 Offset: 6=20 parse exception e =3D=3D> Parse exception in parse()=20 Ending tag error: Start/ending tag mismatch=20 =20 I am using VC 6 on Win2k... =20 =20 When i tried compilig the project... i got this error =20 error C2632: 'long' followed by 'long' is illegal=20 =20 So.. i modified the typedef for Long to have only long...=20 Apart from this i didn't any other change ....=20 =20 Any clue about the problem....=20 =20 How should i solve the compilation error =20 =20 And if the change is correct... then what else can be the problem... = =20 In case someone has a working example ... please share it...=20 =20 Thanks !!=20 =20 Regards=20 |
|
From: Harbhanu <har...@hu...> - 2007-05-16 03:28:08
|
selectXPath(ap,L"/ns1:Envelope/ns1:Header/*[@ns1:mustUnderstand]") Evaluation of this(in evalXpath) .returns an empty set..r u also getting an empty set..?? _____ From: Jimmy Zhang [mailto:cra...@co...] Sent: Wednesday, May 16, 2007 11:14 AM To: Harbhanu Cc: vtd...@li... Subject: Re: soap.c and soap2.xml Well, yes, you have to call setDoc with the actuall content length... when "r", VC replaces /r/n with /n so the file appears shorter... What expression? Is it declareXPathNameSpace(ap,L"ns1",Lhttp://www.w3.org/2003/05/soap-envelope);? I tried it and it worked for me... ----- Original Message ----- From: Harbhanu <mailto:har...@hu...> To: 'Jimmy Zhang' <mailto:cra...@co...> Cc: vtd...@li... Sent: Tuesday, May 15, 2007 7:22 PM Subject: RE: soap.c and soap2.xml Yes.. now the exception is not there..after using any of the suggested solutions . ("rb' for binary mode) What was the problem??? Was it regarding the legth mismatch between the actual length a the length passed.. Now, the evaluation is not correct.it works for the root selection..but when I execute the original expression . the result is empty... Any clues?? Thanks for the prompt replies..expecting the similar level of activity n promptness in this mailing list!! Regards, Harbhanu _____ From: Jimmy Zhang [mailto:cra...@co...] Sent: Tuesday, May 15, 2007 3:58 PM To: Harbhanu Cc: vtd...@li... Subject: Re: soap.c and soap2.xml I think you should use __int64, to fix the parse exception there are two ways, one is to fopen() the XML doc using the "ro" instead of "r," this is to treat the XML as binary data... the other way is to assign i (an int) the return value of fread(), so instead of "fread(...)," do "i=fread(...)." Either one should fix the problem... ----- Original Message ----- From: Harbhanu <mailto:har...@hu...> To: 'Jimmy Zhang' <mailto:cra...@co...> Cc: vtd...@li... Sent: Monday, May 14, 2007 11:13 PM Subject: RE: soap.c and soap2.xml Hi, Currently I am using Vtd-XML version 2.0. I want to use it on windows..VC-6. Even i think the problem must be pertaining to change of Long...but don't know the exact source. When I use Long typedef as long... Line Number: 14 Offset: 6 parse exception e ==> Parse exception in parse() Ending tag error: Start/ending tag mismatch When I use Long typedef as __int64.. Line Number: 47 Offset: 1 parse exception e ==> Parse exception in parse() Other Error: XML not terminated properly Did u do any change for long long in your code ??.. In my case it will result in compilation errors.... Please try after doing this change in your code.are you also getting similar problem or there is some configuration related issue. Regards, Harbhanu _____ From: Jimmy Zhang [mailto:cra...@co...] Sent: Tuesday, May 15, 2007 12:13 PM To: har...@hu... Cc: vtd...@li... Subject: soap.c and soap2.xml I tried the same code today and could not duplicate this issue. I am using VC 2003... but that should not matter... What version of VTD-XML are you using? Changing Long to long will not work because a long is 32 bit, a Long is 64-bit... can you make file on Linux? ======================================== Hi, I am trying to use the C version of VTD-XML. I tried executing the test program given (the SOAP example)... <http://vtd-xml.sourceforge.net/codeSample/cs4.html> http://vtd-xml.sourceforge.net/codeSample/cs4.html [using soap.c soap2.xml] But i am getting this error.... Line Number: 14 Offset: 6 parse exception e ==> Parse exception in parse() Ending tag error: Start/ending tag mismatch I am using VC 6 on Win2k... When i tried compilig the project... i got this error error C2632: 'long' followed by 'long' is illegal So.. i modified the typedef for Long to have only long... Apart from this i didn't any other change .... Any clue about the problem.... How should i solve the compilation error And if the change is correct... then what else can be the problem... In case someone has a working example ... please share it... Thanks !! Regards |
|
From: Jimmy Z. <cra...@co...> - 2007-05-16 04:02:47
|
how do you know it is empty? do you have an output file name out.txt?? ----- Original Message -----=20 From: Harbhanu=20 To: 'Jimmy Zhang'=20 Cc: vtd...@li...=20 Sent: Tuesday, May 15, 2007 8:27 PM Subject: RE: soap.c and soap2.xml selectXPath(ap,L"/ns1:Envelope/ns1:Header/*[@ns1:mustUnderstand]") Evaluation of this(in evalXpath) .returns an empty set..r u also = getting an empty set..?? -------------------------------------------------------------------------= ----- From: Jimmy Zhang [mailto:cra...@co...]=20 Sent: Wednesday, May 16, 2007 11:14 AM To: Harbhanu Cc: vtd...@li... Subject: Re: soap.c and soap2.xml Well, yes, you have to call setDoc with the actuall content length... when "r", VC replaces /r/n with /n so the file appears shorter... What expression?=20 Is it = declareXPathNameSpace(ap,L"ns1",Lhttp://www.w3.org/2003/05/soap-envelope)= ;? I tried it and it worked for me... ----- Original Message -----=20 From: Harbhanu=20 To: 'Jimmy Zhang'=20 Cc: vtd...@li...=20 Sent: Tuesday, May 15, 2007 7:22 PM Subject: RE: soap.c and soap2.xml Yes.. now the exception is not there..after using any of the = suggested solutions . ("rb' for binary mode) What was the problem??? Was it regarding the legth mismatch between = the actual length a the length passed.. Now, the evaluation is not correct.it works for the root = selection..but when I execute the original expression . the result is = empty... Any clues?? Thanks for the prompt replies..expecting the similar level of = activity n promptness in this mailing list!! Regards, Harbhanu -------------------------------------------------------------------------= --- From: Jimmy Zhang [mailto:cra...@co...]=20 Sent: Tuesday, May 15, 2007 3:58 PM To: Harbhanu Cc: vtd...@li... Subject: Re: soap.c and soap2.xml I think you should use __int64, to fix the parse exception there are two ways, one is to fopen() the XML doc using the "ro" instead of = "r," this is to treat the XML as binary data... the other way is to assign i (an int) the return value of fread(), so instead of "fread(...)," do "i=3Dfread(...)." Either one should fix the problem... ----- Original Message -----=20 From: Harbhanu=20 To: 'Jimmy Zhang'=20 Cc: vtd...@li...=20 Sent: Monday, May 14, 2007 11:13 PM Subject: RE: soap.c and soap2.xml Hi, Currently I am using Vtd-XML version 2.0. I want to use it on windows..VC-6. Even i think the problem must be pertaining to change of = Long...but don't know the exact source. When I use Long typedef as long... Line Number: 14 Offset: 6 parse exception e =3D=3D> Parse exception in parse() Ending tag error: Start/ending tag mismatch When I use Long typedef as __int64.. Line Number: 47 Offset: 1 parse exception e =3D=3D> Parse exception in parse() Other Error: XML not terminated properly Did u do any change for long long in your code ??.. In my case it = will result in compilation errors.... Please try after doing this change in your code.are you also = getting similar problem or there is some configuration related issue. Regards, Harbhanu -------------------------------------------------------------------------= - From: Jimmy Zhang [mailto:cra...@co...]=20 Sent: Tuesday, May 15, 2007 12:13 PM To: har...@hu... Cc: vtd...@li... Subject: soap.c and soap2.xml I tried the same code today and could not duplicate this issue. I = am using VC 2003... but that should not matter... What version of VTD-XML are you using? Changing Long to long will not work because a long is 32 bit, a Long is 64-bit... can you make file on Linux? = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Hi,=20 I am trying to use the C version of VTD-XML.=20 =20 I tried executing the test program given (the SOAP example)...=20 http://vtd-xml.sourceforge.net/codeSample/cs4.html [using soap.c = soap2.xml]=20 =20 But i am getting this error....=20 =20 Line Number: 14 Offset: 6=20 parse exception e =3D=3D> Parse exception in parse()=20 Ending tag error: Start/ending tag mismatch=20 =20 I am using VC 6 on Win2k... =20 =20 When i tried compilig the project... i got this error =20 error C2632: 'long' followed by 'long' is illegal=20 =20 So.. i modified the typedef for Long to have only long...=20 Apart from this i didn't any other change ....=20 =20 Any clue about the problem....=20 =20 How should i solve the compilation error =20 =20 And if the change is correct... then what else can be the = problem...=20 =20 In case someone has a working example ... please share it...=20 =20 Thanks !!=20 =20 Regards=20 |
|
From: Harbhanu <har...@hu...> - 2007-05-16 05:50:44
|
Yes..and it is empty. Basically its not going inside the while loop .. _____ From: Jimmy Zhang [mailto:cra...@co...] Sent: Wednesday, May 16, 2007 12:02 PM To: Harbhanu Cc: vtd...@li... Subject: Re: soap.c and soap2.xml how do you know it is empty? do you have an output file name out.txt?? ----- Original Message ----- From: Harbhanu <mailto:har...@hu...> To: 'Jimmy Zhang' <mailto:cra...@co...> Cc: vtd...@li... Sent: Tuesday, May 15, 2007 8:27 PM Subject: RE: soap.c and soap2.xml selectXPath(ap,L"/ns1:Envelope/ns1:Header/*[@ns1:mustUnderstand]") Evaluation of this(in evalXpath) .returns an empty set..r u also getting an empty set..?? _____ From: Jimmy Zhang [mailto:cra...@co...] Sent: Wednesday, May 16, 2007 11:14 AM To: Harbhanu Cc: vtd...@li... Subject: Re: soap.c and soap2.xml Well, yes, you have to call setDoc with the actuall content length... when "r", VC replaces /r/n with /n so the file appears shorter... What expression? Is it declareXPathNameSpace(ap,L"ns1",Lhttp://www.w3.org/2003/05/soap-envelope);? I tried it and it worked for me... ----- Original Message ----- From: Harbhanu <mailto:har...@hu...> To: 'Jimmy Zhang' <mailto:cra...@co...> Cc: vtd...@li... Sent: Tuesday, May 15, 2007 7:22 PM Subject: RE: soap.c and soap2.xml Yes.. now the exception is not there..after using any of the suggested solutions . ("rb' for binary mode) What was the problem??? Was it regarding the legth mismatch between the actual length a the length passed.. Now, the evaluation is not correct.it works for the root selection..but when I execute the original expression . the result is empty... Any clues?? Thanks for the prompt replies..expecting the similar level of activity n promptness in this mailing list!! Regards, Harbhanu _____ From: Jimmy Zhang [mailto:cra...@co...] Sent: Tuesday, May 15, 2007 3:58 PM To: Harbhanu Cc: vtd...@li... Subject: Re: soap.c and soap2.xml I think you should use __int64, to fix the parse exception there are two ways, one is to fopen() the XML doc using the "ro" instead of "r," this is to treat the XML as binary data... the other way is to assign i (an int) the return value of fread(), so instead of "fread(...)," do "i=fread(...)." Either one should fix the problem... ----- Original Message ----- From: Harbhanu <mailto:har...@hu...> To: 'Jimmy Zhang' <mailto:cra...@co...> Cc: vtd...@li... Sent: Monday, May 14, 2007 11:13 PM Subject: RE: soap.c and soap2.xml Hi, Currently I am using Vtd-XML version 2.0. I want to use it on windows..VC-6. Even i think the problem must be pertaining to change of Long...but don't know the exact source. When I use Long typedef as long... Line Number: 14 Offset: 6 parse exception e ==> Parse exception in parse() Ending tag error: Start/ending tag mismatch When I use Long typedef as __int64.. Line Number: 47 Offset: 1 parse exception e ==> Parse exception in parse() Other Error: XML not terminated properly Did u do any change for long long in your code ??.. In my case it will result in compilation errors.... Please try after doing this change in your code.are you also getting similar problem or there is some configuration related issue. Regards, Harbhanu _____ From: Jimmy Zhang [mailto:cra...@co...] Sent: Tuesday, May 15, 2007 12:13 PM To: har...@hu... Cc: vtd...@li... Subject: soap.c and soap2.xml I tried the same code today and could not duplicate this issue. I am using VC 2003... but that should not matter... What version of VTD-XML are you using? Changing Long to long will not work because a long is 32 bit, a Long is 64-bit... can you make file on Linux? ======================================== Hi, I am trying to use the C version of VTD-XML. I tried executing the test program given (the SOAP example)... <http://vtd-xml.sourceforge.net/codeSample/cs4.html> http://vtd-xml.sourceforge.net/codeSample/cs4.html [using soap.c soap2.xml] But i am getting this error.... Line Number: 14 Offset: 6 parse exception e ==> Parse exception in parse() Ending tag error: Start/ending tag mismatch I am using VC 6 on Win2k... When i tried compilig the project... i got this error error C2632: 'long' followed by 'long' is illegal So.. i modified the typedef for Long to have only long... Apart from this i didn't any other change .... Any clue about the problem.... How should i solve the compilation error And if the change is correct... then what else can be the problem... In case someone has a working example ... please share it... Thanks !! Regards |
|
From: <cra...@co...> - 2007-05-16 06:50:16
|
Can you send me the exact C file used for your project? -------------- Original message -------------- From: Harbhanu <har...@hu...> Yes .and it is empty Basically its not going inside the while loop .. From: Jimmy Zhang [mailto:cra...@co...] Sent: Wednesday, May 16, 2007 12:02 PM To: Harbhanu Cc: vtd...@li... Subject: Re: soap.c and soap2.xml how do you know it is empty? do you have an output file name out.txt?? ----- Original Message ----- From: Harbhanu To: 'Jimmy Zhang' Cc: vtd...@li... Sent: Tuesday, May 15, 2007 8:27 PM Subject: RE: soap.c and soap2.xml selectXPath(ap,L"/ns1:Envelope/ns1:Header/*[@ns1:mustUnderstand]") Evaluation of this(in evalXpath) returns an empty set .r u also getting an empty set .?? From: Jimmy Zhang [mailto:cra...@co...] Sent: Wednesday, May 16, 2007 11:14 AM To: Harbhanu Cc: vtd...@li... Subject: Re: soap.c and soap2.xml Well, yes, you have to call setDoc with the actuall content length... when "r", VC replaces /r/n with /n so the file appears shorter... What expression? Is it declareXPathNameSpace(ap,L"ns1",Lhttp://www.w3.org/2003/05/soap-envelope);? I tried it and it worked for me... ----- Original Message ----- From: Harbhanu To: 'Jimmy Zhang' Cc: vtd...@li... Sent: Tuesday, May 15, 2007 7:22 PM Subject: RE: soap.c and soap2.xml Yes.. now the exception is not there .after using any of the suggested solutions (rb for binary mode) What was the problem??? Was it regarding the legth mismatch between the actual length a the length passed . Now, the evaluation is not correct it works for the root selection .but when I execute the original expression the result is empty... Any clues?? Thanks for the prompt replies .expecting the similar level of activity n promptness in this mailing list!! Regards, Harbhanu From: Jimmy Zhang [mailto:cra...@co...] Sent: Tuesday, May 15, 2007 3:58 PM To: Harbhanu Cc: vtd...@li... Subject: Re: soap.c and soap2.xml I think you should use __int64, to fix the parse exception there are two ways, one is to fopen() the XML doc using the "ro" instead of "r," this is to treat the XML as binary data... the other way is to assign i (an int) the return value of fread(), so instead of "fread(...)," do "i=fread(...)." Either one should fix the problem... ----- Original Message ----- From: Harbhanu To: 'Jimmy Zhang' Cc: vtd...@li... Sent: Monday, May 14, 2007 11:13 PM Subject: RE: soap.c and soap2.xml Hi, Currently I am using Vtd-XML version 2.0 I want to use it on windows .VC-6 Even i think the problem must be pertaining to change of Long ..but dont know the exact source When I use Long typedef as long... Line Number: 14 Offset: 6 parse exception e ==> Parse exception in parse() Ending tag error: Start/ending tag mismatch When I use Long typedef as __int64.. Line Number: 47 Offset: 1 parse exception e ==> Parse exception in parse() Other Error: XML not terminated properly Did u do any change for long long in your code ?? . In my case it will result in compilation errors.. . Please try after doing this change in your code are you also getting similar problem or there is some configuration related issue Regards, Harbhanu From: Jimmy Zhang [mailto:cra...@co...] Sent: Tuesday, May 15, 2007 12:13 PM To: har...@hu... Cc: vtd...@li... Subject: soap.c and soap2.xml I tried the same code today and could not duplicate this issue. I am using VC 2003... but that should not matter... What version of VTD-XML are you using? Changing Long to long will not work because a long is 32 bit, a Long is 64-bit... can you make file on Linux? ======================================== Hi, I am trying to use the C version of VTD-XML. I tried executing the test program given (the SOAP example)... http://vtd-xml.sourceforge.net/codeSample/cs4.html [using soap.c soap2.xml] But i am getting this error.... Line Number: 14 Offset: 6 parse exception e ==> Parse exception in parse() Ending tag error: Start/ending tag mismatch I am using VC 6 on Win2k... When i tried compilig the project... i got this error error C2632: 'long' followed by 'long' is illegal So.. i modified the typedef for Long to have only long... Apart from this i didn't any other change .... Any clue about the problem.... How should i solve the compilation error And if the change is correct... then what else can be the problem... In case someone has a working example ... please share it... Thanks !! Regards |
|
From: Harbhanu <har...@hu...> - 2007-05-16 07:58:10
|
I am not sure whether I can. because of some restrictions on sending out direct code. And the procedure for taking an approval is tedius and time consuming... But there is not much difference as compared to the sample code.. I only did the modification for "fread" .. When I execute the query "/". then I get the complete document in the out put file. But for other queries. its empty.. Can you send me your working copy.. of the sample ';) _____ From: cra...@co... [mailto:cra...@co...] Sent: Wednesday, May 16, 2007 2:50 PM To: Harbhanu Cc: vtd...@li... Subject: RE: soap.c and soap2.xml Can you send me the exact C file used for your project? -------------- Original message -------------- From: Harbhanu <har...@hu...> Yes..and it is empty. Basically its not going inside the while loop .. _____ From: Jimmy Zhang [mailto:cra...@co...] Sent: Wednesday, May 16, 2007 12:02 PM To: Harbhanu Cc: vtd...@li... Subject: Re: soap.c and soap2.xml how do you know it is empty? do you have an output file name out.txt?? ----- Original Message ----- From: Harbhanu <mailto:har...@hu...> To: 'Jimmy Zhang' <mailto:cra...@co...> Cc: vtd...@li... Sent: Tuesday, May 15, 2007 8:27 PM Subject: RE: soap.c and soap2.xml selectXPath(ap,L"/ns1:Envelope/ns1:Header/*[@ns1:mustUnderstand]") Evaluation of this(in evalXpath) .returns an empty set..r u also getting an empty set..?? _____ From: Jimmy Zhang [mailto:cra...@co...] Sent: Wednesday, May 16, 2007 11:14 AM To: Harbhanu Cc: vtd...@li... Subject: Re: soap.c and soap2.xml Well, yes, you have to call setDoc with the actuall content length... when "r", VC replaces /r/n with /n so the file appears shorter... What expression? Is it declareXPathNameSpace(ap,L"ns1",Lhttp://www.w3.org/2003/05/soap-envelope);? I tried it and it worked for me... ----- Original Message ----- From: Harbhanu <mailto:har...@hu...> To: 'Jimmy Zhang' <mailto:cra...@co...> Cc: vtd...@li... Sent: Tuesday, May 15, 2007 7:22 PM Subject: RE: soap.c and soap2.xml Yes.. now the exception is not there..after using any of the suggested solutions . ("rb' for binary mode) What was the problem??? Was it regarding the legth mismatch between the actual length a the length passed.. Now, the evaluation is not correct.it works for the root selection..but when I execute the original expression . the result is empty... Any clues?? Thanks for the prompt replies..expecting the similar level of activity n promptness in this mailing list!! Regards, Harbhanu _____ From: Jimmy Zhang [mailto:cra...@co...] Sent: Tuesday, May 15, 2007 3:58 PM To: Harbhanu Cc: vtd...@li... Subject: Re: soap.c and soap2.xml I think you should use __int64, to fix the parse exception there are two ways, one is to fopen() the XML doc using the "ro" instead of "r," this is to treat the XML as binary data... the other way is to assign i (an int) the return value of fread(), so instead of "fread(...)," do "i=fread(...)." Either one should fix the problem... ----- Original Message ----- From: Harbhanu <mailto:har...@hu...> To: 'Jimmy Zhang' <mailto:cra...@co...> Cc: vtd...@li... Sent: Monday, May 14, 2007 11:13 PM Subject: RE: soap.c and soap2.xml Hi, Currently I am using Vtd-XML version 2.0. I want to use it on windows..VC-6. Even i think the problem must be pertaining to change of Long...but don't know the exact source. When I use Long typedef as long... Line Number: 14 Offset: 6 parse exception e ==> Parse exception in parse() Ending tag error: Start/ending tag mismatch When I use Long typedef as __int64.. Line Number: 47 Offset: 1 parse exception e ==> Parse exception in parse() Other Error: XML not terminated properly Did u do any change for long long in your code ??.. In my case it will result in compilation errors.... Please try after doing this change in your code.are you also getting similar problem or there is some configuration related issue. Regards, Harbhanu _____ From: Jimmy Zhang [mailto:cra...@co...] Sent: Tuesday, May 15, 2007 12:13 PM To: har...@hu... Cc: vtd...@li... Subject: soap.c and soap2.xml I tried the same code today and could not duplicate this issue. I am using VC 2003... but that should not matter... What version of VTD-XML are you using? Changing Long to long will not work because a long is 32 bit, a Long is 64-bit... can you make file on Linux? ======================================== Hi, I am trying to use the C version of VTD-XML. I tried executing the test program given (the SOAP example)... <http://vtd-xml.sourceforge.net/codeSample/cs4.html> http://vtd-xml.sourceforge.net/codeSample/cs4.html [using soap.c soap2.xml] But i am getting this error.... Line Number: 14 Offset: 6 parse exception e ==> Parse exception in parse() Ending tag error: Start/ending tag mismatch I am using VC 6 on Win2k... When i tried compilig the project... i got this error error C2632: 'long' followed by 'long' is illegal So.. i modified the typedef for Long to have only long... Apart from this i didn't any other change .... &nb sp; Any clue about the problem.... How should i solve the compilation error And if the change is correct... then what else can be the problem... In case someone has a working example ... please share it... Thanks !! Regards |
|
From: Jimmy Z. <cra...@co...> - 2007-05-16 08:39:39
|
Give me some time to respond I think I have something defintely working =
on myside
----- Original Message -----=20
From: Harbhanu=20
To: cra...@co...=20
Cc: vtd...@li...=20
Sent: Wednesday, May 16, 2007 12:57 AM
Subject: RE: soap.c and soap2.xml
I am not sure whether I can. because of some restrictions on sending =
out direct code.
And the procedure for taking an approval is tedius and time =
consuming...
But there is not much difference as compared to the sample code..
I only did the modification for "fread" ..
When I execute the query "/". then I get the complete document in the =
out put file.
But for other queries. its empty..
Can you send me your working copy.. of the sample ';)
-------------------------------------------------------------------------=
-----
From: cra...@co... [mailto:cra...@co...]=20
Sent: Wednesday, May 16, 2007 2:50 PM
To: Harbhanu
Cc: vtd...@li...
Subject: RE: soap.c and soap2.xml
Can you send me the exact C file used for your project?
-------------- Original message --------------=20
From: Harbhanu <har...@hu...>=20
Yes..and it is empty.
Basically its not going inside the while loop ..
-------------------------------------------------------------------------=
---
From: Jimmy Zhang [mailto:cra...@co...]=20
Sent: Wednesday, May 16, 2007 12:02 PM
To: Harbhanu
Cc: vtd...@li...
Subject: Re: soap.c and soap2.xml
how do you know it is empty?
do you have an output file name out.txt??
----- Original Message -----=20
From: Harbhanu=20
To: 'Jimmy Zhang'=20
Cc: vtd...@li...=20
Sent: Tuesday, May 15, 2007 8:27 PM
Subject: RE: soap.c and soap2.xml
selectXPath(ap,L"/ns1:Envelope/ns1:Header/*[@ns1:mustUnderstand]")
Evaluation of this(in evalXpath) .returns an empty set..r u also =
getting an empty set..??
-------------------------------------------------------------------------=
-
From: Jimmy Zhang [mailto:cra...@co...]=20
Sent: Wednesday, May 16, 2007 11:14 AM
To: Harbhanu
Cc: vtd...@li...
Subject: Re: soap.c and soap2.xml
Well, yes, you have to call setDoc with the actuall content =
length...
when "r", VC replaces /r/n with /n so the file appears shorter...
What expression?=20
Is it =
declareXPathNameSpace(ap,L"ns1",Lhttp://www.w3.org/2003/05/soap-envelope)=
;?
I tried it and it worked for me...
----- Original Message -----=20
From: Harbhanu=20
To: 'Jimmy Zhang'=20
Cc: vtd...@li...=20
Sent: Tuesday, May 15, 2007 7:22 PM
Subject: RE: soap.c and soap2.xml
Yes.. now the exception is not there..after using any of the =
suggested solutions . ("rb' for binary mode)
What was the problem??? Was it regarding the legth mismatch =
between the actual length a the length passed..
Now, the evaluation is not correct.it works for the root =
selection..but when I execute the original expression . the result is =
empty...
Any clues??
Thanks for the prompt replies..expecting the similar level of =
activity n promptness in this mailing list!!
Regards,
Harbhanu
------------------------------------------------------------------------
From: Jimmy Zhang [mailto:cra...@co...]=20
Sent: Tuesday, May 15, 2007 3:58 PM
To: Harbhanu
Cc: vtd...@li...
Subject: Re: soap.c and soap2.xml
I think you should use __int64, to fix the parse exception there =
are
two ways, one is to fopen() the XML doc using the "ro" instead =
of "r,"
this is to treat the XML as binary data...
the other way is to assign i (an int) the return value of =
fread(),
so instead of "fread(...)," do "i=3Dfread(...)."
Either one should fix the problem...
----- Original Message -----=20
From: Harbhanu=20
To: 'Jimmy Zhang'=20
Cc: vtd...@li...=20
Sent: Monday, May 14, 2007 11:13 PM
Subject: RE: soap.c and soap2.xml
Hi,
Currently I am using Vtd-XML version 2.0.
I want to use it on windows..VC-6.
Even i think the problem must be pertaining to change of =
Long...but don't know the exact source.
When I use Long typedef as long...
Line Number: 14 Offset: 6
parse exception e =3D=3D> Parse exception in parse()
Ending tag error: Start/ending tag mismatch
When I use Long typedef as __int64..
Line Number: 47 Offset: 1
parse exception e =3D=3D> Parse exception in parse()
Other Error: XML not terminated properly
Did u do any change for long long in your code ??.. In my case =
it will result in compilation errors....
Please try after doing this change in your code.are you also =
getting similar problem or there is some configuration related issue.
Regards,
Harbhanu
----------------------------------------------------------------------
From: Jimmy Zhang [mailto:cra...@co...]=20
Sent: Tuesday, May 15, 2007 12:13 PM
To: har...@hu...
Cc: vtd...@li...
Subject: soap.c and soap2.xml
I tried the same code today and could not duplicate this =
issue. I am
using VC 2003... but that should not matter...
What version of VTD-XML are you using? Changing Long to long
will not work because a long is 32 bit, a Long is 64-bit...
can you make file on Linux?
=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Hi,=20
I am trying to use the C version of VTD-XML.=20
=20
I tried executing the test program given (the SOAP example)... =
http://vtd-xml.sourceforge.net/codeSample/cs4.html [using =
soap.c soap2.xml]=20
=20
But i am getting this error....=20
=20
Line Number: 14 Offset: 6=20
parse exception e =3D=3D> Parse exception in parse()=20
Ending tag error: Start/ending tag mismatch=20
=20
I am using VC 6 on Win2k... =20
=20
When i tried compilig the project... i got this error =20
error C2632: 'long' followed by 'long' is illegal=20
=20
So.. i modified the typedef for Long to have only long...=20
Apart from this i didn't any other change ....=20
&nb sp;
Any clue about the problem....=20
=20
How should i solve the compilation error =20
=20
And if the change is correct... then what else can be the =
problem...=20
=20
In case someone has a working example ... please share it...=20
=20
Thanks !!=20
=20
Regards=20
|
|
From: Jimmy Z. <cra...@co...> - 2007-05-15 07:58:46
|
I think you should use __int64, to fix the parse exception there are two ways, one is to fopen() the XML doc using the "ro" instead of "r," this is to treat the XML as binary data... the other way is to assign i (an int) the return value of fread(), so instead of "fread(...)," do "i=3Dfread(...)." Either one should fix the problem... ----- Original Message -----=20 From: Harbhanu=20 To: 'Jimmy Zhang'=20 Cc: vtd...@li...=20 Sent: Monday, May 14, 2007 11:13 PM Subject: RE: soap.c and soap2.xml Hi, Currently I am using Vtd-XML version 2.0. I want to use it on windows..VC-6. Even i think the problem must be pertaining to change of Long...but = don't know the exact source. When I use Long typedef as long... Line Number: 14 Offset: 6 parse exception e =3D=3D> Parse exception in parse() Ending tag error: Start/ending tag mismatch When I use Long typedef as __int64.. Line Number: 47 Offset: 1 parse exception e =3D=3D> Parse exception in parse() Other Error: XML not terminated properly Did u do any change for long long in your code ??.. In my case it will = result in compilation errors.... Please try after doing this change in your code.are you also getting = similar problem or there is some configuration related issue. Regards, Harbhanu -------------------------------------------------------------------------= ----- From: Jimmy Zhang [mailto:cra...@co...]=20 Sent: Tuesday, May 15, 2007 12:13 PM To: har...@hu... Cc: vtd...@li... Subject: soap.c and soap2.xml I tried the same code today and could not duplicate this issue. I am using VC 2003... but that should not matter... What version of VTD-XML are you using? Changing Long to long will not work because a long is 32 bit, a Long is 64-bit... can you make file on Linux? = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Hi,=20 I am trying to use the C version of VTD-XML.=20 =20 I tried executing the test program given (the SOAP example)...=20 http://vtd-xml.sourceforge.net/codeSample/cs4.html [using soap.c = soap2.xml]=20 =20 But i am getting this error....=20 =20 Line Number: 14 Offset: 6=20 parse exception e =3D=3D> Parse exception in parse()=20 Ending tag error: Start/ending tag mismatch=20 =20 I am using VC 6 on Win2k... =20 =20 When i tried compilig the project... i got this error =20 error C2632: 'long' followed by 'long' is illegal=20 =20 So.. i modified the typedef for Long to have only long...=20 Apart from this i didn't any other change ....=20 =20 Any clue about the problem....=20 =20 How should i solve the compilation error =20 =20 And if the change is correct... then what else can be the problem...=20 =20 In case someone has a working example ... please share it...=20 =20 Thanks !!=20 =20 Regards=20 |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X