Half of DMD missing on Scared Stiff VR Room Table
Port of Visual Pinball X to VR
Brought to you by:
vpvr
Menu
▾
▴
2 Attachments
#46 Half of DMD missing on Scared Stiff VR Room Table
The Scared Stiff VR table only shows half the DMD when using the 2021-01-24 VPVR files. When I replace the files with the 2020-12-28 files on VPinball, DMD displays correctly.
So far this seems to be the only table having this problem. Tried a few others and DMD looks fine with the lasted files.
Table: https://vpinball.com/VPBdownloads/vr-room-scared-stiff/
Working Files: https://vpinball.com/VPBdownloads/vpvr-executable-and-supporting-files/#bbpress
Ignore the yellow line around the DMD, that seems to pop up when I use the snip tool.
This looks similar to the 4 control point light issue I posted above, but the DMD is normally a flasher.
I'm now running March 15 release and noticed the same display error. You are correct about the extra point on the flasher. I added a fifth point to the Primary_DMD_flasher object and it now renders correctly.
Oddly I also noticed I light on the playfield giving the same display error. The Jackpot light on the right side (L37n) had the same visual bug and was fixed when adding a 5th point. A similar light on the left side (L42n) however only has 4 points and works fine. Not sure what's different. At least there is a workaround for now. Thanks for the tip.
This is on Scared Stiff v1.43 https://vpinball.com/VPBdownloads/scared-stiff-bally-1996/