Re: [vmtk-users] Problems reading DICOM on Windows

[Luca A. <luc...@or...>]

Hi Ben,
 is this happening just for this DICOM set?

The fact that you get a crash both in the old VTK-based way (-f) and the ITK-based one (-ifile) 
could be symptomatic of the fact that there's something odd going on with the DICOMs, although
typically you shouldn't get a crash but an error message.

Are you sure you have enough memory to open the DICOM? I've experienced memory allocation 
limitations on older Windows systems in the past, so if your DICOM series is very large that might
be it (you should get an "Unable to allocate [something something]" as an error before the crash).

Hope this helps.


Luca


On Jun 18, 2013, at 5:05 PM, Berkowitz, Benjamin M wrote:

> I'm having problems reading in a DICOM set in the Windows binary.  I've tried importing using vmtkimagereader with the -f parameter as well as the -ifile parameter.  I've also just tried using vmtkimageviewer directly.  Each time, python crashes and it won't open the DICOMs.  Is it more likely a problem with the files themselves or a bug in VMTK?
> 
> Thanks,
> 
> Ben
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
> 
> Build for Windows Store.
> 
> http://p.sf.net/sfu/windows-dev2dev_______________________________________________
> vmtk-users mailing list
> vmt...@li...
> https://lists.sourceforge.net/lists/listinfo/vmtk-users