[Visual-devel] Re: Visual: Faq revisada y work en =?ISO-8859-1?Q?espa=F1ol?=

[<mix...@ja...>]

loader   : after open
loader   : line 1 : #
loader   : line 2 : # This configuration file was used to test Allen Bradley master (normal)
loader   : line 3 : # and slave (VISUAL answers like AB PLC) drivers
loader   : line 4 : #
loader   : line 5 : # Write a confuguration file like this one for your project or for each you
loader   : line 6 : # are running on the same machine. It must be in the directory you start
loader   : line 7 : # VISUAL from.
loader   : line 8 : #
loader   : line 9 : # Every line beginning with a '#' is a comment.
loader   : line 10 : #
loader   : line 11 : # The directory where you keep the .sht files (spreadsheet contents)
loader   : line 12 : # and .tfi files (transfer instruction list) for the drivers for this
loader   : line 13 : # project. This is the minimum you must specify.
loader   : line 14 : #
loader   : line 15 : #project: ./work/
loader   : line 16 : project: ./pruebas/
loader   : found project directory: ./pruebas/
loader   : trying to load the spread sheets.
loader   : Tue Nov  5 09:33:22 2002
loader   : trying to load: ./pruebas/1.sht
loader   : loading ./pruebas/1.sht.
engine   : outer closing classname /SHEET
loader   : no such file: ./pruebas/1.set.
loader   : Tue Nov  5 09:33:22 2002
loader   : trying to load: ./pruebas/2.sht
loader   : line 17 : #
loader   : line 18 : # The directory where you keep the drivers. You have to set up this if
loader   : line 19 : # you need any loadable drivers. Normally, you do.
loader   : line 20 : #
loader   : line 21 : driverpath: ./drivers/
loader   : found driver directory: ./drivers/
loader   : line 22 : #
loader   : line 23 : # Select one of the loadable language modules here:
loader   : line 24 : #
loader   : line 25 : #language: lang_fr.so
loader   : line 26 : #language: lang_en.so
loader   : line 27 : #language: lang_gr.so
loader   : line 28 : language: lang_es.so
loader   : found language module: lang_es.so
loader   : I will dlopen module: ./drivers/lang_es.so
loader   : line 29 : #
loader   : line 30 : # A PLC driver for the Siemens S5 series: s5_drv.so
loader   : line 31 : # The first parameter is the filename of the tfi-list, here: 2.tfi
loader   : line 32 : # The rest will be passed on to the driver. It will then use ttyS1 with
loader   : line 33 : # 9600 baud, even parity, 8 bits and one stop bit.
loader   : line 34 : #
loader   : line 35 : #driver: s5_drv.so 2.tfi /dev/ttyS1 9600 e 8 1
loader   : line 36 : #
loader   : line 37 : # A nother PLC driver is alspadrv.so
loader   : line 38 : #
loader   : line 39 : #driver: alspadrv.so alspa.tfi /dev/ttyS3 19200 o 8 1
loader   : line 40 : 
loader   : *** Syntax error in line 40
loader   : line 41 : #
loader   : line 42 : # A driver to connect to beckhoff BC9000 controller via ethernet:
loader   : line 43 : #
loader   : line 44 : #driver: beckhoff.so beckhoff.tfi 172.16.17.1
loader   : line 45 : #
loader   : line 46 : driver: allen_b.so ab.tfi /dev/ttyS0 9600 n 8 1
loader   : found driver module: allen_b.so 
loader   : found driver info: ab.tfi /dev/ttyS0 9600 n 8 1
loader   : Driver Instruction List in: ./pruebas/ab.tfi
loader   : I will dlopen driver: ./drivers/allen_b.so
loader   : dlsym: (null)
Allen_B  : thread starts.
Allen_B  : driver instatiated.plcdrv  : load from ab.tfi
engine   : no classname found
cellList : registrations:   0
plcdrv  : enter exec list
plcdrv  : enter exec TI1
loader   : created driver thread: 0
loader   : Tue Nov  5 09:33:22 2002
loader   : line 47 : #driver: allen_b_slave.so abslave.tfi /dev/ttyS1 9600 n 8 1
loader   : line 48 : #
loader   : line 49 : # Another driver you may want to use: server.so
loader   : line 50 : # This is not a PLC driver, but the server module that accepts
loader   : line 51 : # connections from HMI viewers or other instances of visual.
loader   : line 52 : # No tfi-list will be used by this driver, but a port number to listen to:
loader   : line 53 : # 
loader   : line 54 : driver: server.so port=1182
loader   : found driver module: server.so 
loader   : found driver info: port=1182
loader   : I will dlopen driver: ./drivers/server.so
loader   : dlsym: (null)
server   : Main serv: port=1182
server   : Main serv: 1182
server   : Main serv: 1182
server   : Main serv: I pass pipe fd to accepter:0
loader   : created driver thread: 0
loader   : Tue Nov  5 09:33:22 2002
loader   : line 55 : #
loader   : line 56 : driver: server2.so port=182
loader   : found driver module: server2.so 
loader   : found driver info: port=182
loader   : I will dlopen driver: ./drivers/server2.so
loader   : dlsym: (null)
server   : Main serv: about to select on 7
server2  : Main serv: port=182
server2  : Main serv: 182
server2  : Main serv: 182
server2  : Main serv: I pass pipe fd to accepter:0
loader   : created driver thread: 0
loader   : Tue Nov  5 09:33:22 2002
loader   : line 57 : #
loader   : line 58 : # Now comes the complement to server.so, client.so
loader   : line 59 : # This is can make connections to other instances of visual.
loader   : line 60 : # The tfi-list defines for each connection the peers IP, port and the values to
loader   : line 61 : # get from this system.
loader   : line 62 : # 
loader   : line 63 : #driver: client.so client.tfi
loader   : line 64 : #
loader   : line 65 : # The following modules do data logging/recording:
loader   : line 66 : #
loader   : line 67 : driver: text_rec.so text.tfi
loader   : found driver module: text_rec.so 
loader   : found driver info: text.tfi
loader   : Driver Instruction List in: ./pruebas/text.tfi
loader   : I will dlopen driver: ./drivers/text_rec.so
loader   : loading: ./drivers/text_rec.so dlopen():./drivers/text_rec.so: cannot open shared object file: No such file or directory
loader   : dlsym: ./visual: undefined symbol: DriverThread__FPv
server2  : Main serv: about to select on 9
loader   : created driver thread: 0
loader   : Tue Nov  5 09:33:22 2002
loader   : line 68 : logger: log_md7.so md7.dri /visual/data/tests/
loader   : found LOGger module: log_md7.so
loader   : found LOGger info: md7.dri /visual/data/tests/
loader   : module Instruction List in: ./pruebas/md7.dri
loader   : I will dlopen module: ./drivers/log_md7.so
server   : Accepter : My pipe is:8
server   : Accepter : port 1182
server   : Accepter : setsockopt Success
server   : Accepter : bind Success
server   : Accepter : listen: Success
server   : Accepter : before accept Success 
server2  : Accepter : My pipe is:10
server2  : Accepter : port 182
server2  : Accepter : setsockopt Success
server2  : Accepter : bind Permission denied
server2  : Accepter : listen: Permission denied
server2  : Accepter : before accept Permission denied 
log_md7  : enter setup. list: ./pruebas/md7.dri path:  /visual/data/tests/
log_md7  : after registerModule with mask: 1
log_md7  : after setting path to: /visual/data/tests/
log_md7  : load from ./pruebas/md7.dri
engine   : no classname found
log_md7  : instruction list loaded.
loader   : Tue Nov  5 09:33:23 2002
loader   : line 69 : logger: log_mysql.so mysql.dri localhost,root,,laserdaten,table2
loader   : found LOGger module: log_mysql.so
loader   : found LOGger info: mysql.dri localhost,root,,laserdaten,table2
loader   : module Instruction List in: ./pruebas/mysql.dri
loader   : I will dlopen module: ./drivers/log_mysql.so
log_mysql: enter setup. list: ./pruebas/mysql.dri path:  localhost,root,,laserdaten,table2
log_mysql: after registerModule with mask: 2
log_mysql: host: localhost
log_mysql: user: root
log_mysql: password: 
log_mysql: database: laserdaten
log_mysql: table: table2
log_mysql: load from ./pruebas/mysql.dri
engine   : no classname found
log_mysql: instruction list loaded.
./visual: error while loading shared libraries: ./drivers/log_mysql.so: undefined symbol: mysql_init