Menu
▾
▴
vectorlinux-devel
|
From: <cod...@go...> - 2007-08-13 15:37:09
|
Author: M0E.lnx
Date: Mon Aug 13 08:35:59 2007
New Revision: 20
Modified:
trunk/.lang/.pot
trunk/.lang/frmTools.pot
trunk/.project
trunk/Functions.module
trunk/frmChooseMBR.form
trunk/frmTools.class
Log:
The Boot manager setup now detects the different drives and can find the kernel, as well as the root partitions.
It will show a list of available disks. So far only gathers information but this information will be useful when writing the actual config file for the boot manager
Modified: trunk/.lang/.pot
==============================================================================
--- trunk/.lang/.pot (original)
+++ trunk/.lang/.pot Mon Aug 13 08:35:59 2007
@@ -67,19 +67,16 @@
msgid "Advanced"
msgstr ""
-#: frmChooseMBR.class:45
+#: frmChooseMBR.class:46
msgid "Next >"
msgstr ""
-#: frmChooseMBR.class:50
+#: frmChooseMBR.class:51
msgid "< Back"
msgstr ""
-#: frmChooseMBR.class:55
-msgid ""
-"You chose to install the boot manager to your MBR, but you have\n"
-"multiple disks. Please select the disk you would like to install the "
-"bootmanager in to."
+#: frmChooseMBR.class:56
+msgid "Please select the drive you want your boot manager installed to:"
msgstr ""
#: frmConfig.class:116
@@ -384,7 +381,7 @@
msgid "No partitioning"
msgstr ""
-#: frmTools.class:115
+#: frmTools.class:116
msgid ""
"<center><h3><b>Vector Linux repair tools:</b></h3></center>\n"
"\n"
@@ -409,43 +406,43 @@
"</ul>\n"
msgstr ""
-#: frmTools.class:126
+#: frmTools.class:127
msgid "VL Tools"
msgstr ""
-#: frmTools.class:141
+#: frmTools.class:142
msgid "Distro repair"
msgstr ""
-#: frmTools.class:148
+#: frmTools.class:149
msgid "Restore packages"
msgstr ""
-#: frmTools.class:156
+#: frmTools.class:157
msgid "Repair LILO"
msgstr ""
-#: frmTools.class:163
+#: frmTools.class:164
msgid "Backup / restore"
msgstr ""
-#: frmTools.class:170
+#: frmTools.class:171
msgid "Backup /home"
msgstr ""
-#: frmTools.class:178
+#: frmTools.class:179
msgid "Restore /home"
msgstr ""
-#: frmTools.class:185
+#: frmTools.class:186
msgid "Miscellaneous"
msgstr ""
-#: frmTools.class:192
+#: frmTools.class:193
msgid "Tool 5"
msgstr ""
-#: frmTools.class:200
+#: frmTools.class:201
msgid "(Make FHS tree)"
msgstr ""
Modified: trunk/.lang/frmTools.pot
==============================================================================
--- trunk/.lang/frmTools.pot (original)
+++ trunk/.lang/frmTools.pot Mon Aug 13 08:35:59 2007
@@ -14,47 +14,47 @@
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-#: frmTools.class:115
+#: frmTools.class:116
msgid "<center><h3><b>Vector Linux repair tools:</b></h3></center>\n\n<b><u>Distro repair tools:</u></b>\n<ul>\n<li><b>Repair LILO:</b> Repair <b>Linux Loader</b> boot manager of an existing Vector Linux installation.</li>\n<li><b>Restore packages:</b> Restore original packages from the install CD, to fix a broken upgrade.</li>\n</ul>\n<b><u>Backup / restore tools:</u></b>\n<ul>\n<li><b>Backup /home:</b> Backup your /home directory for safekeeping.</li>\n<li><b>Restore /home:</b> Restore your /home directory from a previous backup. <font color=\"#FF0000\">WARNING: The existing /home directory will be OVERWRITTEN during restore. You have been WARNED.</font></li>\n</ul>\n<b><u>Miscellaneous tools:</u></b> \n<ul>\n<li><b>Tool 5:</b> Tool number 5 to fix something or other.</li>\n<li><b>Tool 6:</b> Tool number 6 to fix something or other.</li>\n</ul>\n"
msgstr ""
-#: frmTools.class:126
+#: frmTools.class:127
msgid "VL Tools"
msgstr ""
-#: frmTools.class:141
+#: frmTools.class:142
msgid "Distro repair"
msgstr ""
-#: frmTools.class:148
+#: frmTools.class:149
msgid "Restore packages"
msgstr ""
-#: frmTools.class:156
+#: frmTools.class:157
msgid "Repair LILO"
msgstr ""
-#: frmTools.class:163
+#: frmTools.class:164
msgid "Backup / restore"
msgstr ""
-#: frmTools.class:170
+#: frmTools.class:171
msgid "Backup /home"
msgstr ""
-#: frmTools.class:178
+#: frmTools.class:179
msgid "Restore /home"
msgstr ""
-#: frmTools.class:185
+#: frmTools.class:186
msgid "Miscellaneous"
msgstr ""
-#: frmTools.class:192
+#: frmTools.class:193
msgid "Tool 5"
msgstr ""
-#: frmTools.class:200
+#: frmTools.class:201
msgid "(Make FHS tree)"
msgstr ""
Modified: trunk/.project
==============================================================================
--- trunk/.project (original)
+++ trunk/.project Mon Aug 13 08:35:59 2007
@@ -2,7 +2,7 @@
Title=VL-gui-installer
Startup=Main
Icon=vl_logo_icon2.png
-Version=0.0.178
+Version=0.0.193
Library=gb.qt
Library=gb.qt.ext
TabSize=3
Modified: trunk/Functions.module
==============================================================================
--- trunk/Functions.module (original)
+++ trunk/Functions.module Mon Aug 13 08:35:59 2007
@@ -324,72 +324,77 @@
END
-' PUBLIC SUB BootMngrSet()
-' ' This must determine:
-' ' * Where the root partition is
-' ' * Where the kernel is installed
-' ' * where to install lilo (from global.enumLILOMODE ?? )
-' ' * Which OS's to display in the boot menu (From user input)
-' ' * To use bootsplash or to use framebuffer
-' ' We'll use message.info to display the values for now, we can move those values somewhere else, or dome something more useful with them later
-' DIM sRoot_Part AS String
-' DIM sKernel_Loc AS String
-' DIM ROOT_DIR AS String = "/"
-' DIM Boot_DIR AS String = Root_DIR & "boot"
-' ' Locate the root Partition
-' IF global.enumLILOMODE = 0 THEN
-' locate_mbr()
-' SHELL "cat /etc/fstab | awk '{if ($2 == \"/\") {print $1}}'" TO sRoot_Part
-' IF NOT sRoot_Part OR sRoot_Part <> "" THEN
-' SHELL "mount | awk '{if ($3 == \"/\") {print $1}}'" TO sRoot_Part
-' END IF
-' message.Info("I've identified your root partition as " & gb.newline & sRoot_Part)
-' END IF
-' ' Figure out where the kernel is
-' IF Exist(Boot_DIR & "/vmlinuz") THEN
-' sKernel_Loc = Boot_DIR & "/vmlinuz"
-' ELSE IF Exist(ROOT_DIR & "/vmlinuz") THEN
-' sKernel_Loc = Root_DIR & "/vmlinuz"
-' ELSE
-' Message.Info("I can't find a kernel !!! ")
-' END IF
-' IF sKernel_Loc OR sKernel_Loc <> "" THEN
-' message.Info("I've located the kernel in " & gb.NewLine & sKernel_Loc)
-' END IF
-'
-' END
+PUBLIC SUB BootMngrSet()
+' This must determine:
+' * Where the root partition is
+' * Where the kernel is installed
+' * where to install lilo (from global.enumLILOMODE ?? )
+' * Which OS's to display in the boot menu (From user input)
+' * To use bootsplash or to use framebuffer
+' We'll use message.info to display the values for now, we can move those values somewhere else, or dome something more useful with them later
+ DIM sRoot_Part AS String
+ DIM sKernel_Loc AS String
+ DIM ROOT_DIR AS String = "/"
+ DIM Boot_DIR AS String = Root_DIR & "boot"
+ ' Locate the root Partition
+ IF global.enumLILOMODE = 0 THEN
+ locate_mbr()
+ SHELL "cat /etc/fstab | awk '{if ($2 == \"/\") {print $1}}'" TO sRoot_Part
+ IF NOT sRoot_Part OR sRoot_Part <> "" THEN
+ SHELL "mount | awk '{if ($3 == \"/\") {print $1}}'" TO sRoot_Part
+ END IF
+ message.Info("I've identified your root partition as " & gb.newline & sRoot_Part)
+ END IF
+' Figure out where the kernel is
+ IF Exist(Boot_DIR & "/vmlinuz") THEN
+ sKernel_Loc = Boot_DIR & "/vmlinuz"
+ ELSE IF Exist(ROOT_DIR & "/vmlinuz") THEN
+ sKernel_Loc = Root_DIR & "/vmlinuz"
+ ELSE
+ Message.Info("I can't find a kernel !!! ")
+ END IF
+ IF sKernel_Loc OR sKernel_Loc <> "" THEN
+ message.Info("I've located the kernel in " & gb.NewLine & sKernel_Loc)
+ END IF
+
+END
+
+PUBLIC SUB locate_mbr()
+
+ ' If the user chooses to install bootmanager to MBR
+ ' This routine will analyze whether there are more than 1 MBR available
+ ' and which one to use if true, else, use the one available automatically
+ 'SHELL "/sbin/vliloconf"
+
+DIM disks AS String ' list of the mbrs as string
+DIM MBRs AS String[] ' split the many MBR's
+DIM MBR AS String ' Hold a temporary MBR
+DIM MBRTotal AS Integer ' Total MBRS
+DIM MBRIndex AS Integer ' Current MBR (index)
+DIM UseMBR AS String ' MBR to use.... A better place for this is probabbly somewhere in Global
+DIM findcmd AS String = "fdisk -l | grep Disk | cut -d \" \" -f 2 | cut -c 1-8"
'
-' PUBLIC SUB locate_mbr()
-'
-' ' If the user chooses to install bootmanager to MBR
-' ' This routine will analyze whether there are more than 1 MBR available
-' ' and which one to use if true, else, use the one available automatically
-' SHELL "/sbin/vliloconf"
-'
-' ' DIM disks AS String ' list of the mbrs as string
-' ' DIM MBRs AS String[] ' split the many MBR's
-' ' DIM MBR AS String ' Hold a temporary MBR
-' ' DIM MBRTotal AS Integer ' Total MBRS
-' ' DIM MBRIndex AS Integer ' Current MBR (index)
-' ' DIM UseMBR AS String ' MBR to use.... A better place for this is probabbly somewhere in Global
-' '
-' ' SHELL "fdisk -l | grep Disk | cut -d " & " " & "-f 2 | cut -c 1-8" TO disks
-' ' MBRs = Split(disks, " ") ' Maybe use a blank space (ie " " ) instead ??
-' ' MbrTotal = MBRs.Count
-' ' IF MBRTotal = 0 THEN ' This should never happen.
-' ' message.Info(disks)
-' ' message.Error("Cannot find an MBR on this box... You must be on some kind of alien box... ;) ")
-' ' ELSE IF MBRTotal = 1 ' Located only one MBR
-' ' UseMBR = disks ' Obviously, use the one available MBR
-' ' Message.Info("The boot manager will be installed to: " & disks)
-' ' ELSE IF MBRTotal >= 2 THEN ' We found several MBR's here... Your box is loaded with drives out the whazoo!
-' ' FOR MBRIndex = 0 TO MBRs.count - 1
-' ' MBR = MBRs[MBRIndex]
-' ' frmChooseMBR.MbrList.Add(MBR) ' populate the list in the form
-' ' frmChooseMBR.Show ' This form will shoot out a value to Global
-' ' NEXT
-' ' END IF
-'
-'END
+'SHELL "fdisk -l | grep Disk | cut -d " " - f 2 | cut -c 1-8" TO disks
+SHELL findcmd TO disks
+'message.Info(disks)
+MBRs = Split(disks, " ") ' Maybe use a blank space (ie " " ) instead ??
+MbrTotal = MBRs.Count
+IF MBRTotal = 0 THEN ' This should never happen.
+'message.Info(disks)
+ message.Error("Cannot find an MBR on this box... You must be on some kind of alien box... ;) ")
+'ELSE IF MBRTotal = 1 ' Located only one MBR
+' UseMBR = disks ' Obviously, use the one available MBR
+' Message.Info("The boot manager will be installed to: " & disks)
+'ELSE IF MBRTotal >= 2 THEN ' We found several MBR's here... Your box is loaded with drives out the whazoo!
+ELSE
+'message.Info(disks)
+FOR MBRIndex = 0 TO MBRs.count - 1
+ MBR = MBRs[MBRIndex]
+ frmChooseMBR.MbrList.Add(MBR) ' populate the list in the form
+ frmChooseMBR.Show ' This form will shoot out a value to Global
+NEXT
+END IF
+
+END
Modified: trunk/frmChooseMBR.form
==============================================================================
--- trunk/frmChooseMBR.form (original)
+++ trunk/frmChooseMBR.form Mon Aug 13 08:35:59 2007
@@ -5,7 +5,8 @@
Font = Font["Luxi Mono"]
Text = ("")
{ MbrList ListBox
- MoveScaled(1,14,62,23)
+ MoveScaled(1,10,62,27)
+ Font = Font["Luxi Mono"]
}
{ btNext Button
MoveScaled(53,38,9,3)
@@ -16,7 +17,7 @@
Text = ("< Back")
}
{ lbWarn TextLabel
- MoveScaled(1,1,62,12)
- Text = ("You chose to install the boot manager to your MBR, but you have\nmultiple disks. Please select the disk you would like to install the bootmanager in to.")
+ MoveScaled(1,1,62,8)
+ Text = ("Please select the drive you want your boot manager installed to:")
}
}
Modified: trunk/frmTools.class
==============================================================================
--- trunk/frmTools.class (original)
+++ trunk/frmTools.class Mon Aug 13 08:35:59 2007
@@ -24,10 +24,9 @@
END
PUBLIC SUB btnBMRepair_Click() ' Repair LILO:
-'frmMain.btnChoice_Click
-'frmMain.btnConfigure_click ' Display the Boot Manager selection window
+frmMain.btnChoice_Click
+frmMain.btnConfigure_click ' Display the Boot Manager selection window
' Save us some time and use the existing code via Xdialog ???
-SHELL "/sbin/vliloconf"
' Might need to just make it appear in the right place
|
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X