https://sourceforge.net/p/vdfiltermod/wiki/display/Recent changes to displayenWed, 15 Nov 2017 01:03:17 -0000https://sourceforge.net/p/vdfiltermod/wiki/display/?limit=25#b216<div class="markdown_content"><p>And now I noticed that "Auto-switch (recommended)" choice is impossible to save permanently...</p></div>Anton ShekhovtsovWed, 15 Nov 2017 01:03:17 -0000https://sourceforge.net04b3fec50de960900e2b525766743898b71bb34ehttps://sourceforge.net/p/vdfiltermod/wiki/display/<div class="markdown_content"><pre>--- v1 +++ v2 @@ -0,0 +1,15 @@ +## for good performance: + +[[img src=prefs-display.png]] + +All of this is basically unchanged from VirtualDub 1.10 + +**Enable Direct3D mode:** it uses GPU to convert most formats in displayable form. +**Enable Multi-monitor mode:** otherwise Direct3D may be completely disabled if you put window on wrong monitor! + +## About other options: +Use DirectX: just need it to reach Direct3D. +Use Direct3D 11: might be as good as Direct3D 9. Don't know any benefit. +Use OpenGL: almost same as no acceleration. +Use overlays: this has barely any advantage over normal Direct3D and often has problems in drivers. +Disable accelerated display: this option when enabled is wasting more than it is trying to save. </pre> </div>Anton ShekhovtsovWed, 15 Nov 2017 00:20:38 -0000https://sourceforge.net7a4641ebd360d74cbceae6b326c4fe180f4c967chttps://sourceforge.net/p/vdfiltermod/wiki/display/Anton ShekhovtsovTue, 14 Nov 2017 23:29:13 -0000https://sourceforge.netc2ce4a335be85dbe8d09cfc435f488bd3e86689a