|
From: Rich C. <rc...@wi...> - 2011-10-14 05:49:19
|
valgrind revision: 12150
VEX revision: 2215
GCC version: gcc (SUSE Linux) 4.3.2 [gcc-4_3-branch revision 141291]
C library: GNU C Library stable release version 2.9 (20081117), by Roland McGrath et al.
uname -mrs: Linux 2.6.27.45-0.1-default ppc
Vendor version: Welcome to openSUSE 11.1 - Kernel %r (%t).
Nightly build on ppc32 ( Linux 2.6.27.45-0.1-default ppc )
Started at 2011-10-13 23:26:01 CDT
Ended at 2011-10-14 00:49:05 CDT
Results unchanged from 24 hours ago
Checking out valgrind source tree ... done
Configuring valgrind ... done
Building valgrind ... done
Running regression tests ... failed
Regression test results follow
== 482 tests, 11 stderr failures, 5 stdout failures, 2 stderrB failures, 0 stdoutB failures, 3 post failures ==
gdbserver_tests/mcinfcallWSRU (stderrB)
gdbserver_tests/mcvabits (stderrB)
memcheck/tests/linux/stack_changes (stderr)
memcheck/tests/supp_unknown (stderr)
memcheck/tests/varinfo6 (stderr)
massif/tests/big-alloc (post)
massif/tests/deep-D (post)
massif/tests/overloaded-new (post)
none/tests/ppc32/jm-fp (stdout)
none/tests/ppc32/jm-fp (stderr)
none/tests/ppc32/power5+_round (stdout)
none/tests/ppc32/power5+_round (stderr)
none/tests/ppc32/round (stdout)
none/tests/ppc32/round (stderr)
none/tests/ppc32/test_fx (stdout)
none/tests/ppc32/test_fx (stderr)
none/tests/ppc32/test_gx (stdout)
helgrind/tests/hg05_race2 (stderr)
helgrind/tests/tc18_semabuse (stderr)
helgrind/tests/tc20_verifywrap (stderr)
helgrind/tests/tc23_bogus_condwait (stderr)
=================================================
./valgrind-new/gdbserver_tests/mcinfcallWSRU.stderrB.diff
=================================================
--- mcinfcallWSRU.stderrB.exp 2011-10-14 00:07:45.000000000 -0500
+++ mcinfcallWSRU.stderrB.out 2011-10-14 00:24:05.000000000 -0500
@@ -21,35 +21,33 @@
0x........ in do_burn () at sleepers.c:39
39 for (i = 0; i < burn; i++) loopnr++;
[Switching to thread 1 (Thread ....)]
-#0 0x........ in do_burn () at sleepers.c:39
+#0 0x........ in do_burn ()
+ ...
39 for (i = 0; i < burn; i++) loopnr++;
$1 = void
[Switching to thread 2 (Thread ....)]
#0 0x........ in syscall ...
-Could not write register "xxx"; remote failure reply 'E.
+Remote failure reply: E.
ERROR changing register xxx regno y
gdb commands changing registers (pc, sp, ...) (e.g. 'jump',
set pc, calling from gdb a function in the debugged process, ...)
can only be accepted if the thread is VgTs_Runnable or VgTs_Yielding state
Thread status is VgTs_WaitSys
-'
[Switching to thread 3 (Thread ....)]
#0 0x........ in syscall ...
-Could not write register "xxx"; remote failure reply 'E.
+Remote failure reply: E.
ERROR changing register xxx regno y
gdb commands changing registers (pc, sp, ...) (e.g. 'jump',
set pc, calling from gdb a function in the debugged process, ...)
can only be accepted if the thread is VgTs_Runnable or VgTs_Yielding state
Thread status is VgTs_WaitSys
-'
[Switching to thread 4 (Thread ....)]
#0 0x........ in syscall ...
-Could not write register "xxx"; remote failure reply 'E.
+Remote failure reply: E.
ERROR changing register xxx regno y
gdb commands changing registers (pc, sp, ...) (e.g. 'jump',
set pc, calling from gdb a function in the debugged process, ...)
can only be accepted if the thread is VgTs_Runnable or VgTs_Yielding state
Thread status is VgTs_WaitSys
-'
monitor command request to kill this process
Remote connection closed
=================================================
./valgrind-new/gdbserver_tests/mcvabits.stderrB.diff
=================================================
--- mcvabits.stderrB.exp 2011-10-14 00:07:45.000000000 -0500
+++ mcvabits.stderrB.out 2011-10-14 00:24:38.000000000 -0500
@@ -1,55 +1,32 @@
relaying data between gdb and process ....
vgdb-error value changed from 0 to 999999
-Address 0x........ len 10 addressable
- Address 0x........ is 0 bytes inside data symbol "undefined"
-Address 0x........ len 10 defined
- Address 0x........ is 0 bytes inside data symbol "undefined"
-00000000 00000000 0000
-Address 0x........ len 10 addressable
- Address 0x........ is 0 bytes inside data symbol "undefined"
-Address 0x........ len 10 not defined:
-Uninitialised value at 0x........
- Address 0x........ is 0 bytes inside data symbol "undefined"
-ff00ff00 ff00ff00 ff00
-Address 0x........ len 10 addressable
- Address 0x........ is 0 bytes inside data symbol "undefined"
-Address 0x........ len 10 not defined:
-Uninitialised value at 0x........
- Address 0x........ is 0 bytes inside data symbol "undefined"
-ff000000 0000ff00 ff00
-Address 0x........ len 10 addressable
- Address 0x........ is 0 bytes inside data symbol "undefined"
-Address 0x........ len 10 not defined:
-Uninitialised value at 0x........
- Address 0x........ is 0 bytes inside data symbol "undefined"
-ff00ffff ffffff00 ff00
-Address 0x........ len 2 addressable
- Address 0x........ is 0 bytes inside data symbol "undefined"
-Address 0x........ len 2 not defined:
-Uninitialised value at 0x........
- Address 0x........ is 0 bytes inside data symbol "undefined"
-ff00
-Address 0x........ len 2 not addressable:
-bad address 0x........
- Address 0x........ is 2 bytes inside data symbol "undefined"
-Address 0x........ len 2 not addressable:
-bad address 0x........
- Address 0x........ is 2 bytes inside data symbol "undefined"
-____
-Address 0x........ len 2 has 2 bytes unaddressable
-Address 0x........ len 6 addressable
- Address 0x........ is 4 bytes inside data symbol "undefined"
-Address 0x........ len 6 not defined:
-Uninitialised value at 0x........
- Address 0x........ is 4 bytes inside data symbol "undefined"
-ffffff00 ff00
-Address 0x........ len 10 not addressable:
-bad address 0x........
- Address 0x........ is 0 bytes inside data symbol "undefined"
-Address 0x........ len 10 not addressable:
-bad address 0x........
- Address 0x........ is 0 bytes inside data symbol "undefined"
-0000____ 00000000 0000
-Address 0x........ len 10 has 2 bytes unaddressable
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
monitor command request to kill this process
Remote connection closed
=================================================
./valgrind-new/helgrind/tests/hg05_race2.stderr.diff
=================================================
--- hg05_race2.stderr.exp 2011-10-14 00:07:42.000000000 -0500
+++ hg05_race2.stderr.out 2011-10-14 00:37:34.000000000 -0500
@@ -29,9 +29,6 @@
by 0x........: mythread_wrapper (hg_intercepts.c:...)
...
-Location 0x........ is 0 bytes inside foo.poot[5].plop[11],
-declared at hg05_race2.c:24, in frame #x of thread x
-
----------------------------------------------------------------
Possible data race during write of size 4 at 0x........ by thread #x
@@ -46,8 +43,5 @@
by 0x........: mythread_wrapper (hg_intercepts.c:...)
...
-Location 0x........ is 0 bytes inside foo.poot[5].plop[11],
-declared at hg05_race2.c:24, in frame #x of thread x
-
ERROR SUMMARY: 2 errors from 2 contexts (suppressed: 0 from 0)
=================================================
./valgrind-new/helgrind/tests/tc18_semabuse.stderr.diff
=================================================
--- tc18_semabuse.stderr.exp 2011-10-14 00:07:42.000000000 -0500
+++ tc18_semabuse.stderr.out 2011-10-14 00:38:51.000000000 -0500
@@ -18,13 +18,5 @@
by 0x........: sem_wait (hg_intercepts.c:...)
by 0x........: main (tc18_semabuse.c:34)
-----------------------------------------------------------------
-Thread #x's call to sem_post failed
- with error code 22 (EINVAL: Invalid argument)
- at 0x........: sem_post_WRK (hg_intercepts.c:...)
- by 0x........: sem_post (hg_intercepts.c:...)
- by 0x........: main (tc18_semabuse.c:37)
-
-
-ERROR SUMMARY: 3 errors from 3 contexts (suppressed: 0 from 0)
+ERROR SUMMARY: 2 errors from 2 contexts (suppressed: 0 from 0)
=================================================
./valgrind-new/helgrind/tests/tc20_verifywrap.stderr.diff
=================================================
--- tc20_verifywrap.stderr.exp 2011-10-14 00:07:42.000000000 -0500
+++ tc20_verifywrap.stderr.out 2011-10-14 00:39:14.000000000 -0500
@@ -215,14 +215,6 @@
by 0x........: sem_wait (hg_intercepts.c:...)
by 0x........: main (tc20_verifywrap.c:242)
-----------------------------------------------------------------
-
-Thread #x's call to sem_post failed
- with error code 22 (EINVAL: Invalid argument)
- at 0x........: sem_post_WRK (hg_intercepts.c:...)
- by 0x........: sem_post (hg_intercepts.c:...)
- by 0x........: main (tc20_verifywrap.c:245)
-
FIXME: can't figure out how to verify wrap of sem_post
@@ -235,4 +227,4 @@
...
-ERROR SUMMARY: 23 errors from 23 contexts (suppressed: 0 from 0)
+ERROR SUMMARY: 22 errors from 22 contexts (suppressed: 0 from 0)
=================================================
./valgrind-new/helgrind/tests/tc23_bogus_condwait.stderr.diff
=================================================
--- tc23_bogus_condwait.stderr.exp 2011-10-14 00:07:42.000000000 -0500
+++ tc23_bogus_condwait.stderr.out 2011-10-14 00:39:31.000000000 -0500
@@ -26,6 +26,14 @@
----------------------------------------------------------------
+Thread #x's call to pthread_cond_wait failed
+ with error code 22 (EINVAL: Invalid argument)
+ at 0x........: pthread_cond_wait_WRK (hg_intercepts.c:...)
+ by 0x........: pthread_cond_wait@* (hg_intercepts.c:...)
+ by 0x........: main (tc23_bogus_condwait.c:72)
+
+----------------------------------------------------------------
+
Thread #x: pthread_cond_{timed}wait called with mutex of type pthread_rwlock_t*
at 0x........: pthread_cond_wait_WRK (hg_intercepts.c:...)
by 0x........: pthread_cond_wait@* (hg_intercepts.c:...)
@@ -53,4 +61,4 @@
by 0x........: main (tc23_bogus_condwait.c:78)
-ERROR SUMMARY: 7 errors from 7 contexts (suppressed: 0 from 0)
+ERROR SUMMARY: 8 errors from 8 contexts (suppressed: 0 from 0)
=================================================
./valgrind-new/massif/tests/big-alloc.post.diff
=================================================
--- big-alloc.post.exp 2011-10-14 00:07:51.000000000 -0500
+++ big-alloc.post.out 2011-10-14 00:33:40.000000000 -0500
@@ -36,19 +36,19 @@
n time(B) total(B) useful-heap(B) extra-heap(B) stacks(B)
--------------------------------------------------------------------------------
0 0 0 0 0 0
- 1 10,489,832 10,489,832 10,485,760 4,072 0
- 2 20,979,664 20,979,664 20,971,520 8,144 0
- 3 31,469,496 31,469,496 31,457,280 12,216 0
- 4 41,959,328 41,959,328 41,943,040 16,288 0
- 5 52,449,160 52,449,160 52,428,800 20,360 0
- 6 62,938,992 62,938,992 62,914,560 24,432 0
- 7 73,428,824 73,428,824 73,400,320 28,504 0
- 8 83,918,656 83,918,656 83,886,080 32,576 0
- 9 94,408,488 94,408,488 94,371,840 36,648 0
+ 1 10,489,816 10,489,816 10,485,760 4,056 0
+ 2 20,979,632 20,979,632 20,971,520 8,112 0
+ 3 31,469,448 31,469,448 31,457,280 12,168 0
+ 4 41,959,264 41,959,264 41,943,040 16,224 0
+ 5 52,449,080 52,449,080 52,428,800 20,280 0
+ 6 62,938,896 62,938,896 62,914,560 24,336 0
+ 7 73,428,712 73,428,712 73,400,320 28,392 0
+ 8 83,918,528 83,918,528 83,886,080 32,448 0
+ 9 94,408,344 94,408,344 94,371,840 36,504 0
99.96% (94,371,840B) (heap allocation functions) malloc/new/new[], --alloc-fns, etc.
->99.96% (94,371,840B) 0x........: main (big-alloc.c:12)
--------------------------------------------------------------------------------
n time(B) total(B) useful-heap(B) extra-heap(B) stacks(B)
--------------------------------------------------------------------------------
- 10 104,898,320 104,898,320 104,857,600 40,720 0
+ 10 104,898,160 104,898,160 104,857,600 40,560 0
=================================================
./valgrind-new/massif/tests/big-alloc.post.diff-64bit
=================================================
--- big-alloc.post.exp-64bit 2011-10-14 00:07:51.000000000 -0500
+++ big-alloc.post.out 2011-10-14 00:33:40.000000000 -0500
@@ -36,19 +36,19 @@
n time(B) total(B) useful-heap(B) extra-heap(B) stacks(B)
--------------------------------------------------------------------------------
0 0 0 0 0 0
- 1 10,489,800 10,489,800 10,485,760 4,040 0
- 2 20,979,600 20,979,600 20,971,520 8,080 0
- 3 31,469,400 31,469,400 31,457,280 12,120 0
- 4 41,959,200 41,959,200 41,943,040 16,160 0
- 5 52,449,000 52,449,000 52,428,800 20,200 0
- 6 62,938,800 62,938,800 62,914,560 24,240 0
- 7 73,428,600 73,428,600 73,400,320 28,280 0
- 8 83,918,400 83,918,400 83,886,080 32,320 0
- 9 94,408,200 94,408,200 94,371,840 36,360 0
+ 1 10,489,816 10,489,816 10,485,760 4,056 0
+ 2 20,979,632 20,979,632 20,971,520 8,112 0
+ 3 31,469,448 31,469,448 31,457,280 12,168 0
+ 4 41,959,264 41,959,264 41,943,040 16,224 0
+ 5 52,449,080 52,449,080 52,428,800 20,280 0
+ 6 62,938,896 62,938,896 62,914,560 24,336 0
+ 7 73,428,712 73,428,712 73,400,320 28,392 0
+ 8 83,918,528 83,918,528 83,886,080 32,448 0
+ 9 94,408,344 94,408,344 94,371,840 36,504 0
99.96% (94,371,840B) (heap allocation functions) malloc/new/new[], --alloc-fns, etc.
->99.96% (94,371,840B) 0x........: main (big-alloc.c:12)
--------------------------------------------------------------------------------
n time(B) total(B) useful-heap(B) extra-heap(B) stacks(B)
--------------------------------------------------------------------------------
- 10 104,898,000 104,898,000 104,857,600 40,400 0
+ 10 104,898,160 104,898,160 104,857,600 40,560 0
=================================================
./valgrind-new/massif/tests/deep-D.post.diff
=================================================
--- deep-D.post.exp 2011-10-14 00:07:51.000000000 -0500
+++ deep-D.post.out 2011-10-14 00:33:48.000000000 -0500
@@ -46,8 +46,9 @@
8 3,264 3,264 3,200 64 0
9 3,672 3,672 3,600 72 0
98.04% (3,600B) (heap allocation functions) malloc/new/new[], --alloc-fns, etc.
-->98.04% (3,600B) 0x........: (below main)
-
+->98.04% (3,600B) 0x........: ??? (in /...libc...)
+ ->98.04% (3,600B) 0x........: (below main)
+
--------------------------------------------------------------------------------
n time(B) total(B) useful-heap(B) extra-heap(B) stacks(B)
--------------------------------------------------------------------------------
=================================================
./valgrind-new/massif/tests/overloaded-new.post.diff
=================================================
--- overloaded-new.post.exp 2011-10-14 00:07:51.000000000 -0500
+++ overloaded-new.post.out 2011-10-14 00:34:00.000000000 -0500
@@ -42,14 +42,18 @@
4 12,032 12,032 12,000 32 0
5 12,032 12,032 12,000 32 0
99.73% (12,000B) (heap allocation functions) malloc/new/new[], --alloc-fns, etc.
-->33.24% (4,000B) 0x........: main (overloaded-new.cpp:49)
-|
-->33.24% (4,000B) 0x........: main (overloaded-new.cpp:50)
-|
-->16.62% (2,000B) 0x........: main (overloaded-new.cpp:51)
-|
-->16.62% (2,000B) 0x........: main (overloaded-new.cpp:52)
-
+->33.24% (4,000B) 0x........: operator new(unsigned int) (overloaded-new.cpp:19)
+| ->33.24% (4,000B) 0x........: main (overloaded-new.cpp:49)
+|
+->33.24% (4,000B) 0x........: operator new(unsigned int, std::nothrow_t const&) (overloaded-new.cpp:24)
+| ->33.24% (4,000B) 0x........: main (overloaded-new.cpp:50)
+|
+->16.62% (2,000B) 0x........: operator new[](unsigned int) (overloaded-new.cpp:29)
+| ->16.62% (2,000B) 0x........: main (overloaded-new.cpp:51)
+|
+->16.62% (2,000B) 0x........: operator new[](unsigned int, std::nothrow_t const&) (overloaded-new.cpp:34)
+ ->16.62% (2,000B) 0x........: main (overloaded-new.cpp:52)
+
--------------------------------------------------------------------------------
n time(B) total(B) useful-heap(B) extra-heap(B) stacks(B)
--------------------------------------------------------------------------------
=================================================
./valgrind-new/memcheck/tests/linux/stack_changes.stderr.diff
=================================================
--- stack_changes.stderr.exp 2011-10-14 00:07:48.000000000 -0500
+++ stack_changes.stderr.out 2011-10-14 00:28:01.000000000 -0500
@@ -0,0 +1,5 @@
+WARNING: unhandled syscall: 249
+You may be able to write your own handler.
+Read the file README_MISSING_SYSCALL_OR_IOCTL.
+Nevertheless we consider this a bug. Please report
+it at http://valgrind.org/support/bug_reports.html.
=================================================
./valgrind-new/memcheck/tests/supp_unknown.stderr.diff
=================================================
--- supp_unknown.stderr.exp 2011-10-14 00:07:49.000000000 -0500
+++ supp_unknown.stderr.out 2011-10-14 00:31:22.000000000 -0500
@@ -1,8 +1,11 @@
+Jump to the invalid address stated on the next line
+ ...
+ Address 0x........ is not stack'd, malloc'd or (recently) free'd
+
Process terminating with default action of signal 11 (SIGSEGV)
Access not within mapped region at address 0x........
...
- by 0x........: main (badjump.c:17)
If you believe this happened as a result of a stack
overflow in your program's main thread (unlikely but
possible), you can try to increase the size of the
=================================================
./valgrind-new/memcheck/tests/supp_unknown.stderr.diff-kfail
=================================================
--- supp_unknown.stderr.exp-kfail 2011-10-14 00:07:49.000000000 -0500
+++ supp_unknown.stderr.out 2011-10-14 00:31:22.000000000 -0500
@@ -1,3 +1,7 @@
+Jump to the invalid address stated on the next line
+ ...
+ Address 0x........ is not stack'd, malloc'd or (recently) free'd
+
Process terminating with default action of signal 11 (SIGSEGV)
Access not within mapped region at address 0x........
=================================================
./valgrind-new/memcheck/tests/varinfo6.stderr.diff
=================================================
--- varinfo6.stderr.exp 2011-10-14 00:07:49.000000000 -0500
+++ varinfo6.stderr.out 2011-10-14 00:32:05.000000000 -0500
@@ -7,8 +7,7 @@
by 0x........: BZ2_bzCompress (varinfo6.c:4860)
by 0x........: BZ2_bzBuffToBuffCompress (varinfo6.c:5667)
by 0x........: main (varinfo6.c:6517)
- Location 0x........ is 2 bytes inside local var "budget"
- declared at varinfo6.c:3115, in frame #2 of thread 1
+ Address 0x........ is on thread 1's stack
Uninitialised byte(s) found during client check request
at 0x........: croak (varinfo6.c:34)
=================================================
./valgrind-new/memcheck/tests/varinfo6.stderr.diff-ppc64
=================================================
--- varinfo6.stderr.exp-ppc64 2011-10-14 00:07:49.000000000 -0500
+++ varinfo6.stderr.out 2011-10-14 00:32:05.000000000 -0500
@@ -1,5 +1,5 @@
Uninitialised byte(s) found during client check request
- at 0x........: croak (varinfo6.c:35)
+ at 0x........: croak (varinfo6.c:34)
by 0x........: mainSort (varinfo6.c:2999)
by 0x........: BZ2_blockSort (varinfo6.c:3143)
by 0x........: BZ2_compressBlock (varinfo6.c:4072)
@@ -10,7 +10,7 @@
Address 0x........ is on thread 1's stack
Uninitialised byte(s) found during client check request
- at 0x........: croak (varinfo6.c:35)
+ at 0x........: croak (varinfo6.c:34)
by 0x........: BZ2_decompress (varinfo6.c:1699)
by 0x........: BZ2_bzDecompress (varinfo6.c:5230)
by 0x........: BZ2_bzBuffToBuffDecompress (varinfo6.c:5715)
=================================================
./valgrind-new/none/tests/ppc32/jm-fp.stderr.diff
=================================================
--- jm-fp.stderr.exp 2011-10-14 00:07:58.000000000 -0500
+++ jm-fp.stderr.out 2011-10-14 00:35:33.000000000 -0500
@@ -1,2 +1,27 @@
+disInstr(ppc): declined to decode a GeneralPurpose-Optional insn.
+disInstr(ppc): unhandled instruction: 0x........
+ primary 63(0x........), secondary 44(0x........)
+valgrind: Unrecognised instruction at address 0x.........
+ at 0x........: test_fsqrt (jm-insns.c:1984)
+ by 0x........: test_float_one_arg (jm-insns.c:5739)
+ by 0x........: ??? (in /...libc...)
+ by 0x........: (below main)
+Your program just tried to execute an instruction that Valgrind
+did not recognise. There are two possible reasons for this.
+1. Your program has a bug and erroneously jumped to a non-code
+ location. If you are running Memcheck and you just saw a
+ warning about a bad jump, it's probably your program's fault.
+2. The instruction is legitimate but Valgrind doesn't handle it,
+ i.e. it's Valgrind's fault. If you think this is the case or
+ you are not sure, please let us know and we'll try to fix it.
+Either way, Valgrind will now raise a SIGILL signal which will
+probably kill your program.
+
+Process terminating with default action of signal 4 (SIGILL)
+ Illegal opcode at address 0x........
+ at 0x........: test_fsqrt (jm-insns.c:1984)
+ by 0x........: test_float_one_arg (jm-insns.c:5739)
+ by 0x........: ??? (in /...libc...)
+ by 0x........: (below main)
=================================================
./valgrind-new/none/tests/ppc32/jm-fp.stdout.diff
=================================================
--- jm-fp.stdout.exp 2011-10-14 00:07:58.000000000 -0500
+++ jm-fp.stdout.out 2011-10-14 00:35:33.000000000 -0500
@@ -707,8 +707,8 @@
fres 7ff8000000000000 => 7ff8000000000000
fres fff8000000000000 => fff8000000000000
- frsqrte 0010000000000001 => 5fdf000000000000
- frsqrte 00100094e0000359 => 5fdf000000000000
+ frsqrte 0010000000000001 => 5fdf800000000000
+ frsqrte 00100094e0000359 => 5fdf800000000000
frsqrte 3fe0000000000001 => 3ff6000000000000
frsqrte 3fe00094e0000359 => 3ff6000000000000
frsqrte 8010000000000001 => 7ff8000000000000
@@ -794,638 +794,4 @@
fneg 0010000000000001 => 8010000000000001
fneg 00100094e0000359 => 80100094e0000359
- fneg 3fe0000000000001 => bfe0000000000001
- fneg 3fe00094e0000359 => bfe00094e0000359
- fneg 8010000000000001 => 0010000000000001
- fneg 80100094e0000359 => 00100094e0000359
- fneg bfe0000000000001 => 3fe0000000000001
- fneg bfe00094e0000359 => 3fe00094e0000359
- fneg 0000000000000000 => 8000000000000000
- fneg 8000000000000000 => 0000000000000000
- fneg 7ff0000000000000 => fff0000000000000
- fneg fff0000000000000 => 7ff0000000000000
- fneg 7ff7ffffffffffff => fff7ffffffffffff
- fneg fff7ffffffffffff => 7ff7ffffffffffff
- fneg 7ff8000000000000 => fff8000000000000
- fneg fff8000000000000 => 7ff8000000000000
-
- fabs 0010000000000001 => 0010000000000001
- fabs 00100094e0000359 => 00100094e0000359
- fabs 3fe0000000000001 => 3fe0000000000001
- fabs 3fe00094e0000359 => 3fe00094e0000359
- fabs 8010000000000001 => 0010000000000001
- fabs 80100094e0000359 => 00100094e0000359
- fabs bfe0000000000001 => 3fe0000000000001
- fabs bfe00094e0000359 => 3fe00094e0000359
- fabs 0000000000000000 => 0000000000000000
- fabs 8000000000000000 => 0000000000000000
- fabs 7ff0000000000000 => 7ff0000000000000
- fabs fff0000000000000 => 7ff0000000000000
- fabs 7ff7ffffffffffff => 7ff7ffffffffffff
- fabs fff7ffffffffffff => 7ff7ffffffffffff
- fabs 7ff8000000000000 => 7ff8000000000000
- fabs fff8000000000000 => 7ff8000000000000
-
- fnabs 0010000000000001 => 8010000000000001
- fnabs 00100094e0000359 => 80100094e0000359
- fnabs 3fe0000000000001 => bfe0000000000001
- fnabs 3fe00094e0000359 => bfe00094e0000359
- fnabs 8010000000000001 => 8010000000000001
- fnabs 80100094e0000359 => 80100094e0000359
- fnabs bfe0000000000001 => bfe0000000000001
- fnabs bfe00094e0000359 => bfe00094e0000359
- fnabs 0000000000000000 => 8000000000000000
- fnabs 8000000000000000 => 8000000000000000
- fnabs 7ff0000000000000 => fff0000000000000
- fnabs fff0000000000000 => fff0000000000000
- fnabs 7ff7ffffffffffff => fff7ffffffffffff
- fnabs fff7ffffffffffff => fff7ffffffffffff
- fnabs 7ff8000000000000 => fff8000000000000
- fnabs fff8000000000000 => fff8000000000000
-
- fsqrt 0010000000000001 => 2000000000000000
- fsqrt 00100094e0000359 => 2000004a6f52dd4a
- fsqrt 3fe0000000000001 => 3fe6a09e667f3bcd
- fsqrt 3fe00094e0000359 => 3fe6a107aacb50df
- fsqrt 8010000000000001 => 7ff8000000000000
- fsqrt 80100094e0000359 => 7ff8000000000000
- fsqrt bfe0000000000001 => 7ff8000000000000
- fsqrt bfe00094e0000359 => 7ff8000000000000
- fsqrt 0000000000000000 => 0000000000000000
- fsqrt 8000000000000000 => 8000000000000000
- fsqrt 7ff0000000000000 => 7ff0000000000000
- fsqrt fff0000000000000 => 7ff8000000000000
- fsqrt 7ff7ffffffffffff => 7fffffffffffffff
- fsqrt fff7ffffffffffff => ffffffffffffffff
- fsqrt 7ff8000000000000 => 7ff8000000000000
- fsqrt fff8000000000000 => fff8000000000000
-
-PPC floating point arith insns
- with one arg with flags update:
- fres. 0010000000000001 => 7ff0000000000000
- fres. 00100094e0000359 => 7ff0000000000000
- fres. 3fe0000000000001 => 4000000000000000
- fres. 3fe00094e0000359 => 3ffff00000000000
- fres. 8010000000000001 => fff0000000000000
- fres. 80100094e0000359 => fff0000000000000
- fres. bfe0000000000001 => c000000000000000
- fres. bfe00094e0000359 => bffff00000000000
- fres. 0000000000000000 => 7ff0000000000000
- fres. 8000000000000000 => fff0000000000000
- fres. 7ff0000000000000 => 0000000000000000
- fres. fff0000000000000 => 8000000000000000
- fres. 7ff7ffffffffffff => 7ffff00000000000
- fres. fff7ffffffffffff => fffff00000000000
- fres. 7ff8000000000000 => 7ff8000000000000
<truncated beyond 100 lines>
=================================================
./valgrind-new/none/tests/ppc32/power5+_round.stderr.diff
=================================================
--- power5+_round.stderr.exp 2011-10-14 00:07:58.000000000 -0500
+++ power5+_round.stderr.out 2011-10-14 00:35:41.000000000 -0500
@@ -1,2 +1,20 @@
+disInstr(ppc): unhandled instruction: 0x........
+ primary 63(0x........), secondary 784(0x........)
+valgrind: Unrecognised instruction at address 0x.........
+ at 0x........: main (power5+_round.c:124)
+Your program just tried to execute an instruction that Valgrind
+did not recognise. There are two possible reasons for this.
+1. Your program has a bug and erroneously jumped to a non-code
+ location. If you are running Memcheck and you just saw a
+ warning about a bad jump, it's probably your program's fault.
+2. The instruction is legitimate but Valgrind doesn't handle it,
+ i.e. it's Valgrind's fault. If you think this is the case or
+ you are not sure, please let us know and we'll try to fix it.
+Either way, Valgrind will now raise a SIGILL signal which will
+probably kill your program.
+
+Process terminating with default action of signal 4 (SIGILL)
+ Illegal opcode at address 0x........
+ at 0x........: main (power5+_round.c:124)
=================================================
./valgrind-new/none/tests/ppc32/power5+_round.stdout.diff
=================================================
--- power5+_round.stdout.exp 2011-10-14 00:07:58.000000000 -0500
+++ power5+_round.stdout.out 2011-10-14 00:35:40.000000000 -0500
@@ -1,60 +0,0 @@
-frin inf inf 0 PASS
-frin 1.9 2 0 PASS
-frin 1.1 1 0 PASS
-frin 0 0 0 PASS
-frin -0 -0 0 PASS
-frin -1.1 -1 0 PASS
-frin -1.9 -2 0 PASS
-frin -inf -inf 0 PASS
-frin nan nan 0 PASS
-frin 0.9 1 0 PASS
-frin 0.1 0 0 PASS
-frin -0.1 -0 0 PASS
-frin -0.9 -1 0 PASS
-frin 1e-40 0 0 PASS
-frin -1e-40 -0 0 PASS
-friz inf inf 0 PASS
-friz 1.9 1 0 PASS
-friz 1.1 1 0 PASS
-friz 0 0 0 PASS
-friz -0 -0 0 PASS
-friz -1.1 -1 0 PASS
-friz -1.9 -1 0 PASS
-friz -inf -inf 0 PASS
-friz nan nan 0 PASS
-friz 0.9 0 0 PASS
-friz 0.1 0 0 PASS
-friz -0.1 -0 0 PASS
-friz -0.9 -0 0 PASS
-friz 1e-40 0 0 PASS
-friz -1e-40 -0 0 PASS
-frip inf inf 0 PASS
-frip 1.9 2 0 PASS
-frip 1.1 2 0 PASS
-frip 0 0 0 PASS
-frip -0 -0 0 PASS
-frip -1.1 -1 0 PASS
-frip -1.9 -1 0 PASS
-frip -inf -inf 0 PASS
-frip nan nan 0 PASS
-frip 0.9 1 0 PASS
-frip 0.1 1 0 PASS
-frip -0.1 -0 0 PASS
-frip -0.9 -0 0 PASS
-frip 1e-40 1 0 PASS
-frip -1e-40 -0 0 PASS
-frim inf inf 0 PASS
-frim 1.9 1 0 PASS
-frim 1.1 1 0 PASS
-frim 0 0 0 PASS
-frim -0 -0 0 PASS
-frim -1.1 -2 0 PASS
-frim -1.9 -2 0 PASS
-frim -inf -inf 0 PASS
-frim nan nan 0 PASS
-frim 0.9 0 0 PASS
-frim 0.1 0 0 PASS
-frim -0.1 -1 0 PASS
-frim -0.9 -1 0 PASS
-frim 1e-40 0 0 PASS
-frim -1e-40 -1 0 PASS
=================================================
./valgrind-new/none/tests/ppc32/round.stderr.diff
=================================================
--- round.stderr.exp 2011-10-14 00:07:58.000000000 -0500
+++ round.stderr.out 2011-10-14 00:35:43.000000000 -0500
@@ -1,2 +1,25 @@
+disInstr(ppc): declined to decode a GeneralPurpose-Optional insn.
+disInstr(ppc): unhandled instruction: 0x........
+ primary 63(0x........), secondary 44(0x........)
+valgrind: Unrecognised instruction at address 0x.........
+ at 0x........: check_double_guarded_arithmetic_op (round.c:1116)
+ by 0x........: test_float_arithmetic_ops (round.c:1185)
+ by 0x........: main (round.c:1206)
+Your program just tried to execute an instruction that Valgrind
+did not recognise. There are two possible reasons for this.
+1. Your program has a bug and erroneously jumped to a non-code
+ location. If you are running Memcheck and you just saw a
+ warning about a bad jump, it's probably your program's fault.
+2. The instruction is legitimate but Valgrind doesn't handle it,
+ i.e. it's Valgrind's fault. If you think this is the case or
+ you are not sure, please let us know and we'll try to fix it.
+Either way, Valgrind will now raise a SIGILL signal which will
+probably kill your program.
+
+Process terminating with default action of signal 4 (SIGILL)
+ Illegal opcode at address 0x........
+ at 0x........: check_double_guarded_arithmetic_op (round.c:1116)
+ by 0x........: test_float_arithmetic_ops (round.c:1185)
+ by 0x........: main (round.c:1206)
=================================================
./valgrind-new/none/tests/ppc32/round.stdout.diff
=================================================
--- round.stdout.exp 2011-10-14 00:07:58.000000000 -0500
+++ round.stdout.out 2011-10-14 00:35:43.000000000 -0500
@@ -2259,77 +2259,4 @@
-inf:PASSED:fnmsub(-0x1.000000000000bp+0, 0x1.2p+0 , 0x1.0000000000001p-1) = 0x1.a00000000000dp+0
-inf:PASSED:fnmsub(-0x1.000000000000cp+0, 0x1.2p+0 , 0x1.0000000000001p-1) = 0x1.a00000000000ep+0
-inf:PASSED:fnmsub(-0x1.000000000000dp+0, 0x1.2p+0 , 0x1.0000000000001p-1) = 0x1.a00000000001p+0
--inf:PASSED:fnmsub(-0x1.000000000000ep+0, 0x1.2p+0 , 0x1.0000000000001p-1) = 0x1.a000000000011p+0
--inf:PASSED:fnmsub(-0x1.000000000000fp+0, 0x1.2p+0 , 0x1.0000000000001p-1) = 0x1.a000000000012p+0
--inf:PASSED:fnmsub(0x1p+0 , 0x1.2p+0 , -0x1.0000000000001p-1) = -0x1.ap+0
--inf:PASSED:fnmsub(0x1.0000000000001p+0, 0x1.2p+0 , -0x1.0000000000001p-1) = -0x1.a000000000001p+0
--inf:PASSED:fnmsub(0x1.0000000000002p+0, 0x1.2p+0 , -0x1.0000000000001p-1) = -0x1.a000000000002p+0
--inf:PASSED:fnmsub(0x1.0000000000003p+0, 0x1.2p+0 , -0x1.0000000000001p-1) = -0x1.a000000000003p+0
--inf:PASSED:fnmsub(0x1.0000000000004p+0, 0x1.2p+0 , -0x1.0000000000001p-1) = -0x1.a000000000005p+0
--inf:PASSED:fnmsub(0x1.0000000000005p+0, 0x1.2p+0 , -0x1.0000000000001p-1) = -0x1.a000000000006p+0
--inf:PASSED:fnmsub(0x1.0000000000006p+0, 0x1.2p+0 , -0x1.0000000000001p-1) = -0x1.a000000000007p+0
--inf:PASSED:fnmsub(0x1.0000000000007p+0, 0x1.2p+0 , -0x1.0000000000001p-1) = -0x1.a000000000008p+0
--inf:PASSED:fnmsub(0x1.0000000000008p+0, 0x1.2p+0 , -0x1.0000000000001p-1) = -0x1.a000000000009p+0
--inf:PASSED:fnmsub(0x1.0000000000009p+0, 0x1.2p+0 , -0x1.0000000000001p-1) = -0x1.a00000000000ap+0
--inf:PASSED:fnmsub(0x1.000000000000ap+0, 0x1.2p+0 , -0x1.0000000000001p-1) = -0x1.a00000000000bp+0
--inf:PASSED:fnmsub(0x1.000000000000bp+0, 0x1.2p+0 , -0x1.0000000000001p-1) = -0x1.a00000000000cp+0
--inf:PASSED:fnmsub(0x1.000000000000cp+0, 0x1.2p+0 , -0x1.0000000000001p-1) = -0x1.a00000000000ep+0
--inf:PASSED:fnmsub(0x1.000000000000dp+0, 0x1.2p+0 , -0x1.0000000000001p-1) = -0x1.a00000000000fp+0
--inf:PASSED:fnmsub(0x1.000000000000ep+0, 0x1.2p+0 , -0x1.0000000000001p-1) = -0x1.a00000000001p+0
--inf:PASSED:fnmsub(0x1.000000000000fp+0, 0x1.2p+0 , -0x1.0000000000001p-1) = -0x1.a000000000011p+0
-near:PASSED:fsqrt(0x1.a44p-1 ) = 0x1.cfdcaf353049ep-1
-near:PASSED:fsqrt(0x1.a822p+0 ) = 0x1.498302b49cd6dp+0
-near:PASSED:fsqrt(0x1.05a2p+0 ) = 0x1.02cd13b44f3bfp+0
-near:PASSED:fsqrt(0x1.9504p-1 ) = 0x1.c76073cec0937p-1
-near:PASSED:fsqrt(0x1.dca2p+0 ) = 0x1.5d4f8d4e4c2b2p+0
-near:PASSED:fsqrt(0x1.02c8p+0 ) = 0x1.016309cde7483p+0
-near:PASSED:fsqrt(0x1.b9p-1 ) = 0x1.db2cfe686fe7cp-1
-near:PASSED:fsqrt(0x1.1d02p+0 ) = 0x1.0e1d62e78ed9ep+0
-near:PASSED:fsqrt(0x1.c39p-1 ) = 0x1.e0d526020fb6cp-1
-near:PASSED:fsqrt(0x1.9p-1 ) = 0x1.c48c6001f0acp-1
-near:PASSED:fsqrt(0x1.4852p+0 ) = 0x1.21e9ed813e2e3p+0
-near:PASSED:fsqrt(0x1.e984p-1 ) = 0x1.f4a1b09bbf0b1p-1
-near:PASSED:fsqrt(0x1.9a1p-1 ) = 0x1.ca34879b907afp-1
-near:PASSED:fsqrt(0x1.76b2p+0 ) = 0x1.35b6781aed828p+0
-zero:PASSED:fsqrt(0x1.a44p-1 ) = 0x1.cfdcaf353049ep-1
-zero:PASSED:fsqrt(0x1.a822p+0 ) = 0x1.498302b49cd6dp+0
-zero:PASSED:fsqrt(0x1.05a2p+0 ) = 0x1.02cd13b44f3bfp+0
-zero:PASSED:fsqrt(0x1.9504p-1 ) = 0x1.c76073cec0937p-1
-zero:PASSED:fsqrt(0x1.dca2p+0 ) = 0x1.5d4f8d4e4c2b2p+0
-zero:PASSED:fsqrt(0x1.02c8p+0 ) = 0x1.016309cde7483p+0
-zero:PASSED:fsqrt(0x1.b9p-1 ) = 0x1.db2cfe686fe7cp-1
-zero:PASSED:fsqrt(0x1.1d02p+0 ) = 0x1.0e1d62e78ed9dp+0
-zero:PASSED:fsqrt(0x1.c39p-1 ) = 0x1.e0d526020fb6bp-1
-zero:PASSED:fsqrt(0x1.9p-1 ) = 0x1.c48c6001f0abfp-1
-zero:PASSED:fsqrt(0x1.4852p+0 ) = 0x1.21e9ed813e2e2p+0
-zero:PASSED:fsqrt(0x1.e984p-1 ) = 0x1.f4a1b09bbf0bp-1
-zero:PASSED:fsqrt(0x1.9a1p-1 ) = 0x1.ca34879b907aep-1
-zero:PASSED:fsqrt(0x1.76b2p+0 ) = 0x1.35b6781aed827p+0
-+inf:PASSED:fsqrt(0x1.a44p-1 ) = 0x1.cfdcaf353049fp-1
-+inf:PASSED:fsqrt(0x1.a822p+0 ) = 0x1.498302b49cd6ep+0
-+inf:PASSED:fsqrt(0x1.05a2p+0 ) = 0x1.02cd13b44f3cp+0
-+inf:PASSED:fsqrt(0x1.9504p-1 ) = 0x1.c76073cec0938p-1
-+inf:PASSED:fsqrt(0x1.dca2p+0 ) = 0x1.5d4f8d4e4c2b3p+0
-+inf:PASSED:fsqrt(0x1.02c8p+0 ) = 0x1.016309cde7484p+0
-+inf:PASSED:fsqrt(0x1.b9p-1 ) = 0x1.db2cfe686fe7dp-1
-+inf:PASSED:fsqrt(0x1.1d02p+0 ) = 0x1.0e1d62e78ed9ep+0
-+inf:PASSED:fsqrt(0x1.c39p-1 ) = 0x1.e0d526020fb6cp-1
-+inf:PASSED:fsqrt(0x1.9p-1 ) = 0x1.c48c6001f0acp-1
-+inf:PASSED:fsqrt(0x1.4852p+0 ) = 0x1.21e9ed813e2e3p+0
-+inf:PASSED:fsqrt(0x1.e984p-1 ) = 0x1.f4a1b09bbf0b1p-1
-+inf:PASSED:fsqrt(0x1.9a1p-1 ) = 0x1.ca34879b907afp-1
-+inf:PASSED:fsqrt(0x1.76b2p+0 ) = 0x1.35b6781aed828p+0
--inf:PASSED:fsqrt(0x1.a44p-1 ) = 0x1.cfdcaf353049ep-1
--inf:PASSED:fsqrt(0x1.a822p+0 ) = 0x1.498302b49cd6dp+0
--inf:PASSED:fsqrt(0x1.05a2p+0 ) = 0x1.02cd13b44f3bfp+0
--inf:PASSED:fsqrt(0x1.9504p-1 ) = 0x1.c76073cec0937p-1
--inf:PASSED:fsqrt(0x1.dca2p+0 ) = 0x1.5d4f8d4e4c2b2p+0
--inf:PASSED:fsqrt(0x1.02c8p+0 ) = 0x1.016309cde7483p+0
--inf:PASSED:fsqrt(0x1.b9p-1 ) = 0x1.db2cfe686fe7cp-1
--inf:PASSED:fsqrt(0x1.1d02p+0 ) = 0x1.0e1d62e78ed9dp+0
--inf:PASSED:fsqrt(0x1.c39p-1 ) = 0x1.e0d526020fb6bp-1
--inf:PASSED:fsqrt(0x1.9p-1 ) = 0x1.c48c6001f0abfp-1
--inf:PASSED:fsqrt(0x1.4852p+0 ) = 0x1.21e9ed813e2e2p+0
--inf:PASSED:fsqrt(0x1.e984p-1 ) = 0x1.f4a1b09bbf0bp-1
--inf:PASSED:fsqrt(0x1.9a1p-1 ) = 0x1.ca34879b907aep-1
--inf:PASSED:fsqrt(0x1.76b2p+0 ) = 0x1.35b6781aed827p+0
+-inf:PASSED:fnmsub(-0x1.000000000000ep+0, 0x1.2p+0 , 0x1.0000000000001p-1) = 0x1.a000000000
\ No newline at end of file
=================================================
./valgrind-new/none/tests/ppc32/test_fx.stderr.diff
=================================================
--- test_fx.stderr.exp 2011-10-14 00:07:58.000000000 -0500
+++ test_fx.stderr.out 2011-10-14 00:35:44.000000000 -0500
@@ -1,2 +1,25 @@
+disInstr(ppc): declined to decode a GeneralPurpose-Optional insn.
+disInstr(ppc): unhandled instruction: 0x........
+ primary 63(0x........), secondary 44(0x........)
+valgrind: Unrecognised instruction at address 0x.........
+ at 0x........: do_fsqrt (test_fx.c:9)
+ by 0x........: do_one (test_fx.c:48)
+ by 0x........: main (test_fx.c:81)
+Your program just tried to execute an instruction that Valgrind
+did not recognise. There are two possible reasons for this.
+1. Your program has a bug and erroneously jumped to a non-code
+ location. If you are running Memcheck and you just saw a
+ warning about a bad jump, it's probably your program's fault.
+2. The instruction is legitimate but Valgrind doesn't handle it,
+ i.e. it's Valgrind's fault. If you think this is the case or
+ you are not sure, please let us know and we'll try to fix it.
+Either way, Valgrind will now raise a SIGILL signal which will
+probably kill your program.
+
+Process terminating with default action of signal 4 (SIGILL)
+ Illegal opcode at address 0x........
+ at 0x........: do_fsqrt (test_fx.c:9)
+ by 0x........: do_one (test_fx.c:48)
+ by 0x........: main (test_fx.c:81)
=================================================
./valgrind-new/none/tests/ppc32/test_fx.stdout.diff
=================================================
--- test_fx.stdout.exp 2011-10-14 00:07:58.000000000 -0500
+++ test_fx.stdout.out 2011-10-14 00:35:43.000000000 -0500
@@ -1,40 +0,0 @@
-
-fsqrt 0.000000e+00 -> 0.00000000000000e+00
-fsqrt inf -> inf
-fsqrt -inf -> nan
-fsqrt nan -> nan
-fsqrt nan -> nan
-fsqrt -5.000000e+100 -> nan
-fsqrt -5.000000e+20 -> nan
-fsqrt -5.010000e+02 -> nan
-fsqrt -6.000000e+00 -> nan
-fsqrt -1.000000e+00 -> nan
-fsqrt -2.000000e-20 -> nan
-fsqrt -2.000000e-200 -> nan
-fsqrt 2.000000e-200 -> 1.41421356237310e-100
-fsqrt 2.000000e-20 -> 1.41421356237310e-10
-fsqrt 1.000000e+00 -> 1.00000000000000e+00
-fsqrt 6.000000e+00 -> 2.44948974278318e+00
-fsqrt 5.010000e+02 -> 2.23830292855994e+01
-fsqrt 5.000000e+20 -> 2.23606797749979e+10
-fsqrt 5.000000e+100 -> 2.23606797749979e+50
-
-fsqrts 0.000000e+00 -> 0.000000e+00
-fsqrts inf -> inf
-fsqrts -inf -> nan
-fsqrts nan -> nan
-fsqrts nan -> nan
-fsqrts -5.000000e+100 -> nan
-fsqrts -5.000000e+20 -> nan
-fsqrts -5.010000e+02 -> nan
-fsqrts -6.000000e+00 -> nan
-fsqrts -1.000000e+00 -> nan
-fsqrts -2.000000e-20 -> nan
-fsqrts -2.000000e-200 -> nan
-fsqrts 2.000000e-200 -> 1.414214e-100
-fsqrts 2.000000e-20 -> 1.414214e-10
-fsqrts 1.000000e+00 -> 1.000000e+00
-fsqrts 6.000000e+00 -> 2.449490e+00
-fsqrts 5.010000e+02 -> 2.238303e+01
-fsqrts 5.000000e+20 -> 2.236068e+10
-fsqrts 5.000000e+100 -> 2.236068e+50
=================================================
./valgrind-new/none/tests/ppc32/test_fx.stdout.diff_Minus_nan
=================================================
--- test_fx.stdout.exp_Minus_nan 2011-10-14 00:07:58.000000000 -0500
+++ test_fx.stdout.out 2011-10-14 00:35:43.000000000 -0500
@@ -1,40 +0,0 @@
-
-fsqrt 0.000000e+00 -> 0.00000000000000e+00
-fsqrt inf -> inf
-fsqrt -inf -> nan
-fsqrt nan -> nan
-fsqrt -nan -> -nan
-fsqrt -5.000000e+100 -> nan
-fsqrt -5.000000e+20 -> nan
-fsqrt -5.010000e+02 -> nan
-fsqrt -6.000000e+00 -> nan
-fsqrt -1.000000e+00 -> nan
-fsqrt -2.000000e-20 -> nan
-fsqrt -2.000000e-200 -> nan
-fsqrt 2.000000e-200 -> 1.41421356237310e-100
-fsqrt 2.000000e-20 -> 1.41421356237310e-10
-fsqrt 1.000000e+00 -> 1.00000000000000e+00
-fsqrt 6.000000e+00 -> 2.44948974278318e+00
-fsqrt 5.010000e+02 -> 2.23830292855994e+01
-fsqrt 5.000000e+20 -> 2.23606797749979e+10
-fsqrt 5.000000e+100 -> 2.23606797749979e+50
-
-fsqrts 0.000000e+00 -> 0.000000e+00
-fsqrts inf -> inf
-fsqrts -inf -> nan
-fsqrts nan -> nan
-fsqrts -nan -> -nan
-fsqrts -5.000000e+100 -> nan
-fsqrts -5.000000e+20 -> nan
-fsqrts -5.010000e+02 -> nan
-fsqrts -6.000000e+00 -> nan
-fsqrts -1.000000e+00 -> nan
-fsqrts -2.000000e-20 -> nan
-fsqrts -2.000000e-200 -> nan
-fsqrts 2.000000e-200 -> 1.414214e-100
-fsqrts 2.000000e-20 -> 1.414214e-10
-fsqrts 1.000000e+00 -> 1.000000e+00
-fsqrts 6.000000e+00 -> 2.449490e+00
-fsqrts 5.010000e+02 -> 2.238303e+01
-fsqrts 5.000000e+20 -> 2.236068e+10
-fsqrts 5.000000e+100 -> 2.236068e+50
=================================================
./valgrind-new/none/tests/ppc32/test_gx.stdout.diff
=================================================
--- test_gx.stdout.exp 2011-10-14 00:07:58.000000000 -0500
+++ test_gx.stdout.out 2011-10-14 00:35:45.000000000 -0500
@@ -51,13 +51,13 @@
frsqrte -1.010000e+00 -> nan
frsqrte -2.000000e-20 -> nan
frsqrte -2.000000e-200 -> nan
-frsqrte 2.000000e-200 -> 7.0e+99
+frsqrte 2.000000e-200 -> 7.1e+99
frsqrte 2.000000e-20 -> 7.1e+09
-frsqrte 1.010000e+00 -> 9.7e-01
+frsqrte 1.010000e+00 -> 9.8e-01
frsqrte 6.000000e+00 -> 4.0e-01
-frsqrte 5.010000e+02 -> 4.5e-02
-frsqrte 5.000000e+20 -> 4.5e-11
-frsqrte 5.000000e+100 -> 4.4e-51
+frsqrte 5.010000e+02 -> 4.4e-02
+frsqrte 5.000000e+20 -> 4.4e-11
+frsqrte 5.000000e+100 -> 4.5e-51
frsqrtes 0.000000e+00 -> inf
frsqrtes inf -> 0.0e+00
@@ -71,10 +71,10 @@
frsqrtes -1.010000e+00 -> nan
frsqrtes -2.000000e-20 -> nan
frsqrtes -2.000000e-200 -> nan
-frsqrtes 2.000000e-200 -> 7.0e+99
+frsqrtes 2.000000e-200 -> 7.1e+99
frsqrtes 2.000000e-20 -> 7.1e+09
-frsqrtes 1.010000e+00 -> 9.7e-01
+frsqrtes 1.010000e+00 -> 9.8e-01
frsqrtes 6.000000e+00 -> 4.0e-01
-frsqrtes 5.010000e+02 -> 4.5e-02
-frsqrtes 5.000000e+20 -> 4.5e-11
-frsqrtes 5.000000e+100 -> 4.4e-51
+frsqrtes 5.010000e+02 -> 4.4e-02
+frsqrtes 5.000000e+20 -> 4.4e-11
+frsqrtes 5.000000e+100 -> 4.5e-51
=================================================
./valgrind-new/none/tests/ppc32/test_gx.stdout.diff_Minus_nan
=================================================
--- test_gx.stdout.exp_Minus_nan 2011-10-14 00:07:58.000000000 -0500
+++ test_gx.stdout.out 2011-10-14 00:35:45.000000000 -0500
@@ -3,7 +3,7 @@
fre inf -> 0.0e+00
fre -inf -> -0.0e+00
fre nan -> nan
-fre -nan -> -nan
+fre nan -> nan
fre -5.000000e+100 -> -2.0e-101
fre -5.000000e+20 -> -2.0e-21
fre -5.010000e+02 -> -2.0e-03
@@ -23,7 +23,7 @@
fres inf -> 0.0e+00
fres -inf -> -0.0e+00
fres nan -> nan
-fres -nan -> -nan
+fres nan -> nan
fres -5.000000e+100 -> -0.0e+00
fres -5.000000e+20 -> -2.0e-21
fres -5.010000e+02 -> -2.0e-03
@@ -43,7 +43,7 @@
frsqrte inf -> 0.0e+00
frsqrte -inf -> nan
frsqrte nan -> nan
-frsqrte -nan -> -nan
+frsqrte nan -> nan
frsqrte -5.000000e+100 -> nan
frsqrte -5.000000e+20 -> nan
frsqrte -5.010000e+02 -> nan
@@ -53,17 +53,17 @@
frsqrte -2.000000e-200 -> nan
frsqrte 2.000000e-200 -> 7.1e+99
frsqrte 2.000000e-20 -> 7.1e+09
-frsqrte 1.010000e+00 -> 1.0e+00
-frsqrte 6.000000e+00 -> 4.1e-01
-frsqrte 5.010000e+02 -> 4.5e-02
-frsqrte 5.000000e+20 -> 4.5e-11
+frsqrte 1.010000e+00 -> 9.8e-01
+frsqrte 6.000000e+00 -> 4.0e-01
+frsqrte 5.010000e+02 -> 4.4e-02
+frsqrte 5.000000e+20 -> 4.4e-11
frsqrte 5.000000e+100 -> 4.5e-51
frsqrtes 0.000000e+00 -> inf
frsqrtes inf -> 0.0e+00
frsqrtes -inf -> nan
frsqrtes nan -> nan
-frsqrtes -nan -> -nan
+frsqrtes nan -> nan
frsqrtes -5.000000e+100 -> nan
frsqrtes -5.000000e+20 -> nan
frsqrtes -5.010000e+02 -> nan
@@ -73,8 +73,8 @@
frsqrtes -2.000000e-200 -> nan
frsqrtes 2.000000e-200 -> 7.1e+99
frsqrtes 2.000000e-20 -> 7.1e+09
-frsqrtes 1.010000e+00 -> 1.0e+00
-frsqrtes 6.000000e+00 -> 4.1e-01
-frsqrtes 5.010000e+02 -> 4.5e-02
-frsqrtes 5.000000e+20 -> 4.5e-11
+frsqrtes 1.010000e+00 -> 9.8e-01
+frsqrtes 6.000000e+00 -> 4.0e-01
+frsqrtes 5.010000e+02 -> 4.4e-02
+frsqrtes 5.000000e+20 -> 4.4e-11
frsqrtes 5.000000e+100 -> 4.5e-51
=================================================
./valgrind-old/gdbserver_tests/mcinfcallWSRU.stderrB.diff
=================================================
--- mcinfcallWSRU.stderrB.exp 2011-10-13 23:26:16.000000000 -0500
+++ mcinfcallWSRU.stderrB.out 2011-10-13 23:42:39.000000000 -0500
@@ -21,35 +21,33 @@
0x........ in do_burn () at sleepers.c:39
39 for (i = 0; i < burn; i++) loopnr++;
[Switching to thread 1 (Thread ....)]
-#0 0x........ in do_burn () at sleepers.c:39
+#0 0x........ in do_burn ()
+ ...
39 for (i = 0; i < burn; i++) loopnr++;
$1 = void
[Switching to thread 2 (Thread ....)]
#0 0x........ in syscall ...
-Could not write register "xxx"; remote failure reply 'E.
+Remote failure reply: E.
ERROR changing register xxx regno y
gdb commands changing registers (pc, sp, ...) (e.g. 'jump',
set pc, calling from gdb a function in the debugged process, ...)
can only be accepted if the thread is VgTs_Runnable or VgTs_Yielding state
Thread status is VgTs_WaitSys
-'
[Switching to thread 3 (Thread ....)]
#0 0x........ in syscall ...
-Could not write register "xxx"; remote failure reply 'E.
+Remote failure reply: E.
ERROR changing register xxx regno y
gdb commands changing registers (pc, sp, ...) (e.g. 'jump',
set pc, calling from gdb a function in the debugged process, ...)
can only be accepted if the thread is VgTs_Runnable or VgTs_Yielding state
Thread status is VgTs_WaitSys
-'
[Switching to thread 4 (Thread ....)]
#0 0x........ in syscall ...
-Could not write register "xxx"; remote failure reply 'E.
+Remote failure reply: E.
ERROR changing register xxx regno y
gdb commands changing registers (pc, sp, ...) (e.g. 'jump',
set pc, calling from gdb a function in the debugged process, ...)
can only be accepted if the thread is VgTs_Runnable or VgTs_Yielding state
Thread status is VgTs_WaitSys
-'
monitor command request to kill this process
Remote connection closed
=================================================
./valgrind-old/gdbserver_tests/mcvabits.stderrB.diff
=================================================
--- mcvabits.stderrB.exp 2011-10-13 23:26:16.000000000 -0500
+++ mcvabits.stderrB.out 2011-10-13 23:43:12.000000000 -0500
@@ -1,55 +1,32 @@
relaying data between gdb and process ....
vgdb-error value changed from 0 to 999999
-Address 0x........ len 10 addressable
- Address 0x........ is 0 bytes inside data symbol "undefined"
-Address 0x........ len 10 defined
- Address 0x........ is 0 bytes inside data symbol "undefined"
-00000000 00000000 0000
-Address 0x........ len 10 addressable
- Address 0x........ is 0 bytes inside data symbol "undefined"
-Address 0x........ len 10 not defined:
-Uninitialised value at 0x........
- Address 0x........ is 0 bytes inside data symbol "undefined"
-ff00ff00 ff00ff00 ff00
-Address 0x........ len 10 addressable
- Address 0x........ is 0 bytes inside data symbol "undefined"
-Address 0x........ len 10 not defined:
-Uninitialised value at 0x........
- Address 0x........ is 0 bytes inside data symbol "undefined"
-ff000000 0000ff00 ff00
-Address 0x........ len 10 addressable
- Address 0x........ is 0 bytes inside data symbol "undefined"
-Address 0x........ len 10 not defined:
-Uninitialised value at 0x........
- Address 0x........ is 0 bytes inside data symbol "undefined"
-ff00ffff ffffff00 ff00
-Address 0x........ len 2 addressable
- Address 0x........ is 0 bytes inside data symbol "undefined"
-Address 0x........ len 2 not defined:
-Uninitialised value at 0x........
- Address 0x........ is 0 bytes inside data symbol "undefined"
-ff00
-Address 0x........ len 2 not addressable:
-bad address 0x........
- Address 0x........ is 2 bytes inside data symbol "undefined"
-Address 0x........ len 2 not addressable:
-bad address 0x........
- Address 0x........ is 2 bytes inside data symbol "undefined"
-____
-Address 0x........ len 2 has 2 bytes unaddressable
-Address 0x........ len 6 addressable
- Address 0x........ is 4 bytes inside data symbol "undefined"
-Address 0x........ len 6 not defined:
-Uninitialised value at 0x........
- Address 0x........ is 4 bytes inside data symbol "undefined"
-ffffff00 ff00
-Address 0x........ len 10 not addressable:
-bad address 0x........
- Address 0x........ is 0 bytes inside data symbol "undefined"
-Address 0x........ len 10 not addressable:
-bad address 0x........
- Address 0x........ is 0 bytes inside data symbol "undefined"
-0000____ 00000000 0000
-Address 0x........ len 10 has 2 bytes unaddressable
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
+Undefined command: "eval". Try "help".
monitor command request to kill this process
Remote connection closed
=================================================
./valgrind-old/helgrind/tests/hg05_race2.stderr.diff
=================================================
--- hg05_race2.stderr.exp 2011-10-13 23:26:14.000000000 -0500
+++ hg05_race2.stderr.out 2011-10-13 23:56:06.000000000 -0500
@@ -29,9 +29,6 @@
by 0x........: mythread_wrapper (hg_intercepts.c:...)
...
-Location 0x........ is 0 bytes inside foo.poot[5].plop[11],
-declared at hg05_race2.c:24, in frame #x of thread x
-
----------------------------------------------------------------
Possible data race during write of size 4 at 0x........ by thread #x
@@ -46,8 +43,5 @@
by 0x........: mythread_wrapper (hg_intercepts.c:...)
...
-Location 0x........ is 0 bytes inside foo.poot[5].plop[11],
-declared at hg05_race2.c:24, in frame #x of thread x
-
ERROR SUMMARY: 2 errors from 2 contexts (suppressed: 0 from 0)
=================================================
./valgrind-old/helgrind/tests/tc18_semabuse.stderr.diff
=================================================
--- tc18_semabuse.stderr.exp 2011-10-13 23:26:14.000000000 -0500
+++ tc18_semabuse.stderr.out 2011-10-13 23:57:23.000000000 -0500
@@ -18,13 +18,5 @@
by 0x........: sem_wait (hg_intercepts.c:...)
by 0x........: main (tc18_semabuse.c:34)
-----------------------------------------------------------------
-Thread #x's call to sem_post failed
- with error code 22 (EINVAL: Invalid argument)
- at 0x........: sem_post_WRK (hg_intercepts.c:...)
- by 0x........: sem_post (hg_intercepts.c:...)
- by 0x........: main (tc18_semabuse.c:37)
-
-
-ERROR SUMMARY: 3 errors from 3 contexts (suppressed: 0 from 0)
+ERROR SUMMARY: 2 errors from 2 contexts (suppressed: 0 from 0)
=================================================
./valgrind-old/helgrind/tests/tc20_verifywrap.stderr.diff
=================================================
--- tc20_verifywrap.stderr.exp 2011-10-13 23:26:14.000000000 -0500
+++ tc20_verifywrap.stderr.out 2011-10-13 23:57:46.000000000 -0500
@@ -215,14 +215,6 @@
by 0x........: sem_wait (hg_intercepts.c:...)
by 0x........: main (tc20_verifywrap.c:242)
-----------------------------------------------------------------
-
-Thread #x's call to sem_post failed
- with error code 22 (EINVAL: Invalid argument)
- at 0x........: sem_post_WRK (hg_intercepts.c:...)
- by 0x........: sem_post (hg_intercepts.c:...)
- by 0x........: main (tc20_verifywrap.c:245)
-
FIXME: can't figure out how to verify wrap of sem_post
@@ -235,4 +227,4 @@
...
-ERROR SUMMARY: 23 errors from 23 contexts (suppressed: 0 from 0)
+ERROR SUMMARY: 22 errors from 22 contexts (suppressed: 0 from 0)
=================================================
./valgrind-old/helgrind/tests/tc23_bogus_condwait.stderr.diff
=================================================
--- tc23_bogus_condwait.stderr.exp 2011-10-13 23:26:14.000000000 -0500
+++ tc23_bogus_condwait.stderr.out 2011-10-13 23:58:03.000000000 -0500
@@ -26,6 +26,14 @@
----------------------------------------------------------------
+Thread #x's call to pthread_cond_wait failed
+ with error code 22 (EINVAL: Invalid argument)
+ at 0x........: pthread_cond_wait_WRK (hg_intercepts.c:...)
+ by 0x........: pthread_cond_wait@* (hg_intercepts.c:...)
+ by 0x........: main (tc23_bogus_condwait.c:72)
+
+----------------------------------------------------------------
+
Thread #x: pthread_cond_{timed}wait called with mutex of type pthread_rwlock_t*
at 0x........: pthread_cond_wait_WRK (hg_intercepts.c:...)
by 0x........: pthread_cond_wait@* (hg_intercepts.c:...)
@@ -53,4 +61,4 @@
by 0x........: main (tc23_bogus_condwait.c:78)
-ERROR SUMMARY: 7 errors from 7 contexts (suppressed: 0 from 0)
+ERROR SUMMARY: 8 errors from 8 contexts (suppressed: 0 from 0)
=================================================
./valgrind-old/massif/tests/big-alloc.post.diff
=================================================
--- big-alloc.post.exp 2011-10-13 23:26:23.000000000 -0500
+++ big-alloc.post.out 2011-10-13 23:52:13.000000000 -0500
@@ -36,19 +36,19 @@
n time(B) total(B) useful-heap(B) extra-heap(B) stacks(B)
--------------------------------------------------------------------------------
0 0 0 0 0 0
- 1 10,489,832 10,489,832 10,485,760 4,072 0
- 2 20,979,664 20,979,664 20,971,520 8,144 0
- 3 31,469,496 31,469,496 31,457,280 12,216 0
- 4 41,959,328 41,959,328 41,943,040 16,288 0
- 5 52,449,160 52,449,160 52,428,800 20,360 0
- 6 62,938,992 62,938,992 62,914,560 24,432 0
- 7 73,428,824 73,428,824 73,400,320 28,504 0
- 8 83,918,656 83,918,656 83,886,080 32,576 0
- 9 94,408,488 94,408,488 94,371,840 36,648 0
+ 1 10,489,816 10,489,816 10,485,760 4,056 0
+ 2 20,979,632 20,979,632 20,971,520 8,112 0
+ 3 31,469,448 31,469,448 31,457,280 12,168 0
+ 4 41,959,264 41,959,264 41,943,040 16,224 0
+ 5 52,449,080 52,449,080 52,428,800 20,280 0
+ 6 62,938,896 62,938,896 62,914,560 24,336 0
+ 7 73,428,712 73,428,712 73,400,320 28,392 0
+ 8 83,918,528 83,918,528 83,886,080 32,448 0
+ 9 94,408,344 94,408,344 94,371,840 36,504 0
99.96% (94,371,840B) (heap allocation functions) malloc/new/new[], --alloc-fns, etc.
->99.96% (94,371,840B) 0x........: main (big-alloc.c:12)
--------------------------------------------------------------------------------
n time(B) total(B) useful-heap(B) extra-heap(B) stacks(B)
--------------------------------------------------------------------------------
- 10 104,898,320 104,898,320 104,857,600 40,720 0
+ 10 104,898,160 104,898,160 104,857,600 40,560 0
=================================================
./valgrind-old/massif/tests/big-alloc.post.diff-64bit
=================================================
--- big-alloc.post.exp-64bit 2011-10-13 23:26:23.000000000 -0500
+++ big-alloc.post.out 2011-10-13 23:52:13.000000000 -0500
@@ -36,19 +36,19 @@
n time(B) total(B) useful-heap(B) extra-heap(B) stacks(B)
--------------------------------------------------------------------------------
0 0 0 0 0 0
- 1 10,489,800 10,489,800 10,485,760 4,040 0
- 2 20,979,600 20,979,600 20,971,520 8,080 0
- 3 31,469,400 31,469,400 31,457,280 12,120 0
- 4 41,959,200 41,959,200 41,943,040 16,160 0
- 5 52,449,000 52,449,000 52,428,800 20,200 0
- 6 62,938,800 62,938,800 62,914,560 24,240 0
- 7 73,428,600 73,428,600 73,400,320 ...
[truncated message content] |