|
From: Mogens L. L. <ML...@ba...> - 2009-10-09 20:58:03
|
>disInstr(ppc): declined to decode an AltiVec insn.
It is an Altivec instruction
I got the same problem, but for my case it was because the PPC I use don't
have altivec support. Valgrind actually helped me here, since I also got
the illigal instruction when running without valgrind, but I didn't know
which instruction caused it.
If your PPC support Altivec, I guess valgrind don't. You might be able to
disable altivec when you build your application, and run your application
with lower performance. (But being able to check your application with
valgrind).
Who and how to add support for Altivec in valgrind, if this is the
problem, I don't know...
/Mogens
Brandon Rioja <br...@co...>
09-10-2009 22:46
To
"val...@li..."
<val...@li...>
cc
Subject
Re: [Valgrind-users] Montavista cross compilation
I am getting an illegal instruction error when running valgrind on a ppc
with montavista.
Does anyone have an idea how I can fix this?
# ./valgrind echo hi
==1012== Memcheck, a memory error detector
==1012== Copyright (C) 2002-2009, and GNU GPL'd, by Julian Seward et al.
==1012== Using Valgrind-3.6.0.SVN and LibVEX; rerun with -h for copyright
info
==1012== Command: echo hi
==1012==
disInstr(ppc): declined to decode an AltiVec insn.
disInstr(ppc): unhandled instruction: 0x13CB0321
primary 4(0x4), secondary 801(0x321)
==1012== valgrind: Unrecognised instruction at address 0x400ec70.
==1012== Your program just tried to execute an instruction that Valgrind
==1012== did not recognise. There are two possible reasons for this.
==1012== 1. Your program has a bug and erroneously jumped to a non-code
==1012== location. If you are running Memcheck and you just saw a
==1012== warning about a bad jump, it's probably your program's fault.
==1012== 2. The instruction is legitimate but Valgrind doesn't handle it,
==1012== i.e. it's Valgrind's fault. If you think this is the case or
==1012== you are not sure, please let us know and we'll try to fix it.
==1012== Either way, Valgrind will now raise a SIGILL signal which will
==1012== probably kill your program.
==1012==
==1012== Process terminating with default action of signal 4 (SIGILL)
==1012== Illegal opcode at address 0x400EC70
==1012== at 0x400EC70: _dl_catch_error (dl-error.c:160)
==1012== by 0x4002CE7: do_preload (rtld.c:804)
==1012== by 0x4005A93: dl_main (rtld.c:1727)
==1012== by 0x401595B: _dl_sysdep_start (dl-sysdep.c:239)
==1012== by 0x4002517: _dl_start_final (rtld.c:323)
==1012== by 0x4002A43: _dl_start (rtld.c:551)
==1012== by 0x40164CF: _start (in /lib/ld-2.5.90.so)
==1012==
==1012== HEAP SUMMARY:
==1012== in use at exit: 0 bytes in 0 blocks
==1012== total heap usage: 0 allocs, 0 frees, 0 bytes allocated
==1012==
==1012== All heap blocks were freed -- no leaks are possible
==1012==
==1012== For counts of detected and suppressed errors, rerun with: -v
==1012== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 4 from 2)
Illegal instruction
From: Mogens Lindholdt Lauridsen [mailto:ML...@ba...]
Sent: Friday, October 09, 2009 4:20 PM
To: Brandon Rioja
Cc: Tom Hughes; val...@li...
Subject: Re: [Valgrind-users] Montavista cross compilation
Well, I am sure there is a more elegant way... but this is how I handle
it....
When you build your code, the path for the tools will be set inside
valgrind. So if you build valgrind in:
"/home/foo/valgrind"
You must also make sure it is located in the same path on your target.
I guess you can use "strace valgrind .." to actually see where it expects
to find the memcheck file.
You can probably fix this by setting the --bindir/--sbindir/--libexecdir
on configure when you build valgrind. (I can live with using the same path
when building and running target, so I didn't bother to figure these
setting out. Sorry...)
/Mogens
Brandon Rioja <br...@co...>
09-10-2009 17:31
To
Tom Hughes <to...@co...>
cc
"val...@li..."
<val...@li...>, Mogens Lindholdt Lauridsen
<ML...@ba...>
Subject
Re: [Valgrind-users] Montavista cross compilation
After I got valgrind to compile, I am having difficulty running.
# ./valgrind
valgrind: failed to start tool 'memcheck' for platform 'ppc32-linux': No
such file or directory
-----Original Message-----
From: Tom Hughes [mailto:to...@co...]
Sent: Friday, October 09, 2009 10:57 AM
To: Brandon Rioja
Cc: Mogens Lindholdt Lauridsen; Bart Van Assche;
val...@li...
Subject: Re: [Valgrind-users] Montavista cross compilation
On 09/10/09 15:43, Brandon Rioja wrote:
> I'm getting some problems, still.
>
> This is the error:
>
> /opt/montavista/cge50/montavista/cge/devkit/ppc/85xx/bin/ppc_85xx-gcc
> -Wno-long-long -Wno-pointer-sign -Wdeclaration-after-statement
> -fno-stack-protector -o memcheck-ppc32-linux -static
> -Wl,-defsym,valt_load_address=0x38000000 -nodefaultlibs -nostartfiles -u
> _start -m32 -Wl,-T,../valt_load_address_ppc32_linux.lds
> memcheck_ppc32_linux-mc_leakcheck.o
> memcheck_ppc32_linux-mc_malloc_wrappers.o memcheck_ppc32_linux-mc_main.o
> memcheck_ppc32_linux-mc_translate.o memcheck_ppc32_linux-mc_machine.o
> memcheck_ppc32_linux-mc_errors.o ../coregrind/libcoregrind-ppc32-linux.a
> ../VEX/libvex-ppc32-linux.a -lgcc
>
>
/opt/montavista/cge50/montavista/cge/devkit/ppc/85xx/bin/../lib/gcc/powerpc-montavista-linux-gnuspe/4.2.0/libgcc.a(divdf3.o):
> In function `__divdf3':
>
>
/home/build/BUILD/gcc-4.2.0/objdir/gcc/../../gcc/config/soft-fp/divdf3.c:44:
> undefined reference to `abort'
It looks like your libgcc has references to the abort() function in the
C library but we (deliberately) don't link the with the C library.
libgcc is supposed to be low level support routines for gcc generated
code to call and shouldn't really be calling C library routines like
that as it stops you being able to compile code that doesn't link with
the C library.
Tom
--
Tom Hughes (to...@co...)
http://www.compton.nu/
------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Valgrind-users mailing list
Val...@li...
https://lists.sourceforge.net/lists/listinfo/valgrind-users
------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Valgrind-users mailing list
Val...@li...
https://lists.sourceforge.net/lists/listinfo/valgrind-users
|