Hi Mark,
could you upload the first image again? I can't view it.
Let me try it on a win32 machine with the same version.
....REBOOTING....
Kind regards,
Frans
On Sat, 2010-02-27 at 17:26 -0500, Mark Jones wrote:
> Hi, I had installed UPP in Windows XP x64 in December, more-or-less
> successfully. I was able to update the boot code and firmware, however
> didn't have a cable for programming other chips. Since then, I changed
> this PC to Win7 x32 and made a cable. So I installed the 824 software
> (R822M) (flawless), and it found the attached 788 hardware perfectly.
>
> However, then I upgraded boot1.0.hex to the latest 823 revision and
> tried to upgrade the firmware as well, and it always stops with this:
> http://img256.imageshack.us/img256/7246/824noprogrambootloader1.png
>
> The error is always at "0x800" with a read of "0x38."
>
> It appears as though the "libusb 1.0" driver was installed successfully, see:
> http://img26.imageshack.us/img26/8011/824usbdrivergood.png
>
> Any ideas?
>
> Regards,
> Mark
>
> ------------------------------------------------------------------------------
> Download Intel® Parallel Studio Eval
> Try the new software tools for yourself. Speed compiling, find bugs
> proactively, and fine-tune applications for parallel performance.
> See why Intel Parallel Studio got high marks during beta.
> http://p.sf.net/sfu/intel-sw-dev
> _______________________________________________
> Usbpicprog-technical mailing list
> Usb...@li...
> https://lists.sourceforge.net/lists/listinfo/usbpicprog-technical
|
