Menu
▾
▴
Re: [Usbpicprog-technical] Using the programmer with Windows 8 - problems
|
From: Marcelo M. <mm...@ho...> - 2013-03-11 20:36:44
|
Thank you for the prompt reply Frans. No problem, for the time being I will use the programmer with another PC (Windows 7). Enjoy your new house. Best regards,Marcelo Maggi Date: Mon, 11 Mar 2013 21:28:09 +0100 From: fra...@gm... To: usb...@li... Subject: Re: [Usbpicprog-technical] Using the programmer with Windows 8 - problems Dear Marcelo Maggi, The windows 8 version needs a different driver topology. It is currently in development and it needs a lot more work. I am working on it but i am also busy because i recently moved into a new house. I believe that the bootloader works, but the normal operation still needs some debugging. Kind regards, Frans Schreuder Op 11 mrt. 2013 20:14 schreef "Marcelo Maggi" <mm...@ho...> het volgende: Dear all, I have been using the programmer with Windows 7 (64) for quite a while with no issues at all. I recently migrated to Windows 8 (64), and tried to reinstall the software. The new version (UsbPicProg-amd64-0.5.0-win8.exe) installs with no problems; however, Windows 8 will not recognize the hardware, since there are no drivers available. Using the drivers from the Windows 7 version (UsbPicProg-amd64-0.5.0.exe), and performing a manual driver update, Windows 8 will indicate that the drivers are not signed, so they are not updated. In order to install these drivers, the validation of driver signature in Windows 8 must be temporary disabled, which will allow the driver update process to continue. Now the hardware will be recognized, no issues highlighted in the Windows Device Manager, and when the UsbPicProg software runs the programmer is identified (firmware version 0.5.0). The problem now arises when trying to Program, Read or Verify... clicking any of these options, the program will stop running, with the usual Windows message... "This program stopped working..." It happens all the time, and I have no solution so far... I tried uninstalling and reinstalling, with the same results. I also tried running the program in Compatibility Mode and as Administrator, without success. I would appreciate any help to solve this problem. Thank you. Best regards, Marcelo Maggi ------------------------------------------------------------------------------ Symantec Endpoint Protection 12 positioned as A LEADER in The Forrester Wave(TM): Endpoint Security, Q1 2013 and "remains a good choice" in the endpoint security space. For insight on selecting the right partner to tackle endpoint security challenges, access the full report. http://p.sf.net/sfu/symantec-dev2dev _______________________________________________ Usbpicprog-technical mailing list Usb...@li... https://lists.sourceforge.net/lists/listinfo/usbpicprog-technical ------------------------------------------------------------------------------ Symantec Endpoint Protection 12 positioned as A LEADER in The Forrester Wave(TM): Endpoint Security, Q1 2013 and "remains a good choice" in the endpoint security space. For insight on selecting the right partner to tackle endpoint security challenges, access the full report. http://p.sf.net/sfu/symantec-dev2dev _______________________________________________ Usbpicprog-technical mailing list Usb...@li... https://lists.sourceforge.net/lists/listinfo/usbpicprog-technical |
