Re: [Usbpicprog-technical] Problem with 16F628A

[Marcel K. <mak...@gm...>]

Hello Frans,

the verify step fails, as Marcelo pointed out in his mail today.
------------
Mo 11 Apr 2011 10:10:10 CEST: Löschen vor dem Programmieren
Mo 11 Apr 2011 10:10:10 CEST: Löschen OK
Mo 11 Apr 2011 10:10:10 CEST: Programmieren des Programmbereiches des PIC ...
Mo 11 Apr 2011 10:10:16 CEST: Schreiben des Programmspeichers ist OK
Mo 11 Apr 2011 10:10:16 CEST: Programmieren des Datenbereiches des PIC ...
Mo 11 Apr 2011 10:10:16 CEST: Schreiben des Datenspeichers ist OK
Mo 11 Apr 2011 10:10:16 CEST: Vergleiche alle Bereiche des PIC ...
Mo 11 Apr 2011 10:10:17 CEST: Vergleiche den ProgrammcodeErfolglos bei  0x0. 
Gelesen: 0xFF, Erwartet: 0x55
Mo 11 Apr 2011 10:10:17 CEST: Programmieren des Konfigurationsspeichers des PIC
Mo 11 Apr 2011 10:10:17 CEST: Fehler beim Programmieren des 
Konfigurationsspeichers
Mo 11 Apr 2011 10:10:17 CEST: Ablauf ohne Fehler/Warnungen ausgeführt
------------
this is the log. Is it possible to switch the language to english from within 
the software? Did not find a option. Would be easier for troubleshooting...

In english the sequence would be:
Delete OK -> Programming the program memory OK -> Programming the data memory 
OK -> verify all areas of the pic -> Verify failed at 0x0, read: 0xFF, 
expected: 0x55.

So my programming fails right at the beginning, whereas Marcelo's fails when 
programming large programs to the PIC, if I have understood that correctly.

Also the last message is a bit weird, because ist say: "actions performed 
without errors/warnings". I will have a look at the translation files ...

Best regards
Marcel

On Sunday 10 April 2011 17:06:00 Frans Schreuder wrote:
> Dear Marcel Konrad,
> 
> Could you tell me which error you are getting while programming?
> 
> Kind regards,
> 
> Frans Schreuder
> 
> On 04/10/2011 04:33 PM, Marcel Konrad wrote:
> > Hey,
> > 
> > I have build the through-hole Version of usbpicprog successfully and want
> > to thank you for the good and hard work you have invested so far.
> > 
> > I was able to program a 18F4550 without problems, but when I have tried a
> > 16F628A the programming has failed. Both chips are autodetected just
> > fine. I am using the zif-board to mount the pics.
> > 
> > I measured all pins with the Input/Output Test from the Options menu and
> > they are as following:
> > MCLR 4,96/13,7
> > VDD 5,04
> > PGD 3,52/5,32
> > PGC 3,52/5,31
> > Hardware rev. of usbpicprog is 0.3.2 firmware 0.4.2-beta (tried 0.4.1 as
> > well)
> > 
> > Any suggestions where to go from here?
> > 
> > Kind regards
> > Marcel Konrad
> > 
> > -------------------------------------------------------------------------
> > ----- Xperia(TM) PLAY
> > It's a major breakthrough. An authentic gaming
> > smartphone on the nation's most reliable network.
> > And it wants your games.
> > http://p.sf.net/sfu/verizon-sfdev
> > _______________________________________________
> > Usbpicprog-technical mailing list
> > Usb...@li...
> > https://lists.sourceforge.net/lists/listinfo/usbpicprog-technical