[Usbpicprog-technical] ALL: please help testing the new Windows installer

[Mark J. <hel...@gm...>]

Hi, I had installed UPP in Windows XP x64 in December, more-or-less
successfully. I was able to update the boot code and firmware, however
didn't have a cable for programming other chips. Since then, I changed
this PC to Win7 x32 and made a cable. So I installed the 824 software
(R822M) (flawless), and it found the attached 788 hardware perfectly.

However, then I upgraded boot1.0.hex to the latest 823 revision and
tried to upgrade the firmware as well, and it always stops with this:
http://img256.imageshack.us/img256/7246/824noprogrambootloader1.png

The error is always at "0x800" with a read of "0x38."

It appears as though the "libusb 1.0" driver was installed successfully, see:
http://img26.imageshack.us/img26/8011/824usbdrivergood.png

Any ideas?

Regards,
Mark