Re: [Usbpicprog-technical] JDM programmer for first-time programming

[Francesco M. <f18...@ya...>]

Hi,

Frans Schreuder ha scritto:
> On the firmware page: http://usbpicprog.org/?page_id=6 you can see that 
> you have to attach jumpers on the programming header.
> One jumper is on the MCLR pin of the 18F2550. If you attach only this 
> one, you will see the bootloader in lsusb (it's called Microchip Picdem 
> something)
To me it showed up as:
"ID 04d8:000e Microchip Technology, Inc."

> When you attach the other jumper after programming the usbpicprog 
> firmware, you will see usbpicprog in lsusb.
After flashing (successfully ;)) the uc_code-1.1 (and installing the second 
jumper) I still see the UPP listed as "ID 04d8:000e Microchip Technology, 
Inc."...  but usbpicprog recognizes it (says "usbpicprog 0.1.1 connected") so it 
looks like everything works ;)

As soon as I can I'll post the results about how my UPP through-hole works ;)

Thanks,
Francesco


--