Dear Franz:
I have downloaded the usbpicprog0.9.9-1.0.0-beta, also tried the zadig installer but in any case the programmer is not detected by neither by windows nor by ubuntu 15.05 using usbpicprog-0.3.0-x386_64.deb There is voltage in the board but the green LED does not lits. On the shop where I bought the board, a technician have checked electronics and told me that everything is 0K
thanks in advance.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Work fine in Win 7, 64 bits, Ubuntu 16.04 64 bits.
I made my own pcb from the schematics. (Year 2013).
Unfortunately it seems that the project is abandoned.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Dear Franz:
I have downloaded the usbpicprog0.9.9-1.0.0-beta, also tried the zadig installer but in any case the programmer is not detected by neither by windows nor by ubuntu 15.05 using usbpicprog-0.3.0-x386_64.deb There is voltage in the board but the green LED does not lits. On the shop where I bought the board, a technician have checked electronics and told me that everything is 0K
thanks in advance.
here is the board connected in an USB port to Windows 7 Ultimate
Here is the error message from usbpicprog when attempting to do something
Dear Pedro,
You buy a random board from a random shop and expect it to work with the usbpicprog software. What do you think I can do?
Frans
Dear friends, all right?
I can not access windows 7, 8, or 10.
I have followed all the recommendations.
Any extra information to help me?
Grateful
Work fine in Win 7, 64 bits, Ubuntu 16.04 64 bits.
I made my own pcb from the schematics. (Year 2013).
Unfortunately it seems that the project is abandoned.