Recent changes to driver_en

driver_en modified by k-arimori

k-arimori — Wed, 08 Oct 2025 01:28:35 -0000

--- v10
+++ v11
@@ -1,85 +1,43 @@
 [Back to Top](top_en)
 English | [Japanese](driver_jp)

-#How to install USB driver for URG#
+# URG Driver Installation Guide

- [Driver installation for Windows 10.](driver_win10_en)
- 
- [Prerequisite for Windows Embedded Standard 7](usb_driver_embedded_en)
+## Introduction

-##Prerequisite for Windows 8##
+This guide explains how to install the URG sensor driver for different operating systems.

-URG sensor driver, like most drivers, is not digitally signed by Microsoft. Thus, Windows 8 will refuse to install it. We need to disable the Driver Signature Enforcement temporarily. Windows should be rebooted with this option disabled. The following steps show you how to do that:
+- **Windows 10 / Windows 11**  
+  → The driver is installed automatically, so manual installation is not required.  
+  If you want to assign a port identifier, follow the instructions below:  
+  [Windows 10 / 11 Setup Instructions](driver_win10_en)

- 1. Go to the right bottom corner of the desktop and wait for the side menu to appear. When it's there click on the gear icon with the title "Settings".
-[[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/side_bar_s_en.png]]
- 1. Now click on the entry "More PC Settings", then click on the entry "General".
-[[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/setting_s_en.png]]
- 1. Scroll down to "Restart now" (under "Advanced startup") and click it.
-[[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/general_s_en.png]]
-In Windows 8.1 click (Update and recovery), then (Recovery), then scroll down to "Restart now" (under "Advanced startup") and click it.
-[[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/win8-1-step3.png width=700 height=400]]
- 1. Wait a bit for a menu.
- 1. Now click "Troubleshoot", then "Advanced Options" and after that click "Windows Startup Settings".
-[[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/start_up_1_en.jpg]]
- 1. Click on "Restart" and wait for the profile to happen.
-[[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/start_up_2_en.jpg]]
- 1. Press either the F7 key or the number 7 key from your computer keyboard.
-[[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/start_up_3_en.jpg]]
-
-After it finally booted into the operating system you can install the driver. After you've installed the driver reboot your computer normally and you're done.
+- **Windows 8**  
+  → Pre-installation configuration is required before installing the driver.  
+  [Windows 8 Pre-installation Setup](usb_driver_windows8_en)
+- **Windows Embedded Standard 7**  
+  → Pre-installation configuration is required before installing the driver.  
+  [Windows Embedded Standard 7 Setup](usb_driver_embedded_en)

 ##URG USB driver install##

-This page teach you how to install URG USB driver in Windows 7/8. 
+This section explains how to install the URG USB driver on Windows.  
+The screenshots are from Windows 7, but the procedure is nearly the same for Windows 8, Vista, and XP.  
+Please download and extract the driver beforehand:  
+([URG_USB_Driver_win.zip](https://sourceforge.net/projects/urgnetwork/files/URG_USB_DRIVER/URG_USB_DRIVER_Win.zip/download))

-The driver can be installed almost similar processing though the expression of the message is different in Windows XP and Windows 2000.
-
-
-First, connect URG with USB cable, and open "'''Device manager'''" window.
-
-[[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/driver_install_6.png]]
-
-Press "'''URG-Series USB Driver'''" button.
-
-
-
-
-
+1. Turn on the URG sensor and connect it to your PC using a USB cable.  
+2. Open **Device Manager** and select **URG-Series USB Driver**.  
+ [[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/driver_install_6.png]]
+3. If the driver is not installed, a warning message will appear.  
+   In that case, click **Update Driver...** to begin the installation process.  
 [[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/driver_install_7.png]]
-
-Press "'''Update Driver ...'''" button.
-
-
-
-
-
-
+6. Select **Browse my computer for driver software**.  
 [[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/driver_install_3.png]]
-
-Download URG_USB_Driver package, and decompress. And click "'''Brows my computer for driver software'''" button.
-
- * [URG_USB_Driver_win.zip](https://sourceforge.net/projects/urgnetwork/files/URG_USB_DRIVER/URG_USB_DRIVER_Win.zip/download)
-
-
-
-
-
+7. Click the **Browse** button, choose the folder where you extracted the driver, and click **Next**.  
 [[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/driver_install_4.png]]
-
-Select the folder placed URG_USB_Driver.inf by using "'''Browse'''" button, and click "'''Next'''" button.
-
-
-
-
-
+8. Click **Install this driver software anyway** to complete the installation.
 [[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/driver_install_5.png]]
-
-Click "'''Install this driver software anyway'''". Then the installation is completed.
-
-
-
-

 ##Confirmation URG USB driver##

driver_en modified by s-watanabe

s-watanabe — Thu, 20 Feb 2020 06:13:20 -0000

--- v9
+++ v10
@@ -4,6 +4,8 @@
 #How to install USB driver for URG#

  [Driver installation for Windows 10.](driver_win10_en)
+ 
+ [Prerequisite for Windows Embedded Standard 7](usb_driver_embedded_en)

 ##Prerequisite for Windows 8##

driver_en modified by Mehrez Kristou

Mehrez Kristou — Tue, 27 Oct 2015 10:28:16 -0000

--- v8
+++ v9
@@ -3,7 +3,7 @@

 #How to install USB driver for URG#

- 
+ [Driver installation for Windows 10.](driver_win10_en)

 ##Prerequisite for Windows 8##

driver_en modified by fujimoto

fujimoto — Tue, 24 Jun 2014 08:26:02 -0000

--- v7
+++ v8
@@ -16,7 +16,7 @@
  1. Scroll down to "Restart now" (under "Advanced startup") and click it.
 [[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/general_s_en.png]]
 In Windows 8.1 click (Update and recovery), then (Recovery), then scroll down to "Restart now" (under "Advanced startup") and click it.
-
+[[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/win8-1-step3.png width=700 height=400]]
  1. Wait a bit for a menu.
  1. Now click "Troubleshoot", then "Advanced Options" and after that click "Windows Startup Settings".
 [[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/start_up_1_en.jpg]]

driver_en modified by fujimoto

fujimoto — Tue, 24 Jun 2014 08:23:16 -0000

--- v6
+++ v7
@@ -15,8 +15,8 @@
 [[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/setting_s_en.png]]
  1. Scroll down to "Restart now" (under "Advanced startup") and click it.
 [[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/general_s_en.png]]
-In Windows 8.1 click [Update and recovery], then [Recovery], then scroll down to "Restart now" (under "Advanced startup") and click it.
-[[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/win8-1-step3.png]]
+In Windows 8.1 click (Update and recovery), then (Recovery), then scroll down to "Restart now" (under "Advanced startup") and click it.
+
  1. Wait a bit for a menu.
  1. Now click "Troubleshoot", then "Advanced Options" and after that click "Windows Startup Settings".
 [[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/start_up_1_en.jpg]]
@@ -86,4 +86,3 @@
 [[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/DeviceManager.png]]

 In this case, URG is recognized as COM3 port.
-

driver_en modified by Mehrez Kristou

Mehrez Kristou — Tue, 24 Jun 2014 08:15:37 -0000

--- v5
+++ v6
@@ -16,7 +16,7 @@
  1. Scroll down to "Restart now" (under "Advanced startup") and click it.
 [[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/general_s_en.png]]
 In Windows 8.1 click [Update and recovery], then [Recovery], then scroll down to "Restart now" (under "Advanced startup") and click it.
-[[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/setting_8_1.png]]
+[[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/win8-1-step3.png]]
  1. Wait a bit for a menu.
  1. Now click "Troubleshoot", then "Advanced Options" and after that click "Windows Startup Settings".
 [[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/start_up_1_en.jpg]]
@@ -87,4 +87,3 @@

 In this case, URG is recognized as COM3 port.

-

driver_en modified by Mehrez Kristou

Mehrez Kristou — Tue, 24 Jun 2014 08:14:44 -0000

--- v4
+++ v5
@@ -15,6 +15,8 @@
 [[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/setting_s_en.png]]
  1. Scroll down to "Restart now" (under "Advanced startup") and click it.
 [[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/general_s_en.png]]
+In Windows 8.1 click [Update and recovery], then [Recovery], then scroll down to "Restart now" (under "Advanced startup") and click it.
+[[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/setting_8_1.png]]
  1. Wait a bit for a menu.
  1. Now click "Troubleshoot", then "Advanced Options" and after that click "Windows Startup Settings".
 [[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/start_up_1_en.jpg]]
@@ -86,4 +88,3 @@
 In this case, URG is recognized as COM3 port.

-

driver_en modified by wada-f

wada-f — Mon, 01 Jul 2013 04:03:24 -0000

--- v3
+++ v4
@@ -55,7 +55,7 @@

 Download URG_USB_Driver package, and decompress. And click "'''Brows my computer for driver software'''" button.

- * [URG_USB_Driver_win.zip](http://sourceforge.net/projects/urgwidget/files/URG%20USB%20driver/0.0.2/URG_USB_DRIVER_Win.zip/download)
+ * [URG_USB_Driver_win.zip](https://sourceforge.net/projects/urgnetwork/files/URG_USB_DRIVER/URG_USB_DRIVER_Win.zip/download)

driver_en modified by fujimoto

fujimoto — Fri, 21 Jun 2013 07:50:03 -0000

--- v2
+++ v3
@@ -1,3 +1,4 @@
+[Back to Top](top_en)
 English | [Japanese](driver_jp)

 #How to install USB driver for URG#

driver_en modified by fujimoto

fujimoto — Wed, 19 Jun 2013 05:54:53 -0000

--- v1
+++ v2
@@ -1,13 +1,10 @@
-English | [Japanese](DriverInstallJp)
+English | [Japanese](driver_jp)

-How to install USB driver for URG
------
+#How to install USB driver for URG#

+ 

-
-
-Prerequisite for Windows 8
------
+##Prerequisite for Windows 8##

 URG sensor driver, like most drivers, is not digitally signed by Microsoft. Thus, Windows 8 will refuse to install it. We need to disable the Driver Signature Enforcement temporarily. Windows should be rebooted with this option disabled. The following steps show you how to do that:

@@ -27,8 +24,7 @@

 After it finally booted into the operating system you can install the driver. After you've installed the driver reboot your computer normally and you're done.

-URG USB driver install
------
+##URG USB driver install##

 This page teach you how to install URG USB driver in Windows 7/8. 

@@ -80,11 +76,13 @@

-Confirmation URG USB driver
------
+##Confirmation URG USB driver##

 Let's confirm whether sensor is recognized by using Device Manager.

 [[img src=https://sourceforge.net/p/urgnetwork/wiki/image/attachment/DeviceManager.png]]

 In this case, URG is recognized as COM3 port.
+
+
+