UAM05LP MAC address

[Chang Seng Chieh]

Dear Hokuyo engineers,

I have system which want to used UAM05LP by RJ45 port.
This system need the MAC address from UAM05LP, then it could pass a fixed ip address that connected UAM05LP.
But I can't see any information in manual about MAC adress.
Could you tell us how to get the MAC adress from UAM, please?
If I want to connect 2 or 3 UAM by internet, is that ok?

Hope to see your feedback soon.
Thank you.
Best regard.

SHENG CHIEH

[m-nagata]

Please try the following method.
※ Explain using a Windows PC as an example.
※ The IP address of the sensor when connected is 192.168.0.10 (default value).

① Connect the sensor and the PC one to one (connect the sensor Ethernet cable to the RJ - 45 of the PC) and turn on the sensor.

② At the command prompt, enter "arp - d 192.168.0.10" and press Enter.

③ At the command prompt, enter "ping 192.168.0.10" and press the Enter key.
At this time, if you can not receive the response normally from the sensor, please confirm PC setting and connection with sensor.

④ Type "arp-a 192.168.0.10" at the command prompt and press the Enter key.
The MAC address should be displayed next to the sensor IP.

• Displayed in red frame of sample image file.

Then connect to the second and third sensors and try ① to ④.