Hi! thanks for trying out my tool! To run Portmapper please install Java and then run the jar file as is (not unpacked) as described in the user guide: https://github.com/kaklakariada/portmapper?tab=readme-ov-file#install-java
Hey i have downloaded portmapper from microsoft store. can anyone guide me how to use this? & is it possible that i can forward my ports on mobile data i have shared data from my mobile, ?
Hey i just wanted to ask how do i start? i have downloaded the .jar file. I have unzipped it using winrar can anyone guide me what's the next step how can i start using portmapper?
What command did you run? Ensure that the file is available in your current working directory.
Error: Unable to access jarfile portmapper.jar
Hi. I also have the problem, that the router is not found. Here is my log info: INFO Using default configuration directory 'C:\Users\XXX\AppData\Roaming\UnknownApplicationVendor\PortMapper'. DEBUG Loading settings from file settings.xml DEBUG Got settings [Settings: presets=[XXX], useEntityEncoding=true, logLevel=INFO, routerFactoryClassName=org.chris.portmapper.router.cling.ClingRouterFactory] INFO Creating router factory for class org.chris.portmapper.router.cling.ClingRouterFactory INFO Searching...
not working
Please try to start portmapper from the command line using the following command: java -jar portmapper.jar Please send the error message.
not working
PortMapper 2.2.3 released
Mapping preset not working
WARN Could not connect to router: Did not find a router
Thank you for your feedback!
its working now
fix now
change the library
It looks like your router did not add the mappings you created. Please check if managing port mappings via UPnP is enabled in your router or try another UPnP library.
It looks like your router did not add the mappings you created. Please check if managing port mappings via UPnP is enabled in your router.
Mapping preset not working
CAnnotect connect to router - appears to be using incorrect IPV6 address
WARN Could not connect to router: Did not find a router
Did you execute the command with the double quotes (")? They should not be necessary and could cause a problem. Was there any command output? If the computer shuts off this is likely a problem with the computer, not with portmapper. Can you try it on another computer?
Did you execute the command with the double quotes (")? They should not be necessary and could cause a problem. Was there any command output? If the computer shuts off this is likely a problem with the computer, not with portmapper.
Thanks for responding. I had java ver 8 and uninstalled it and installed "jdk-11.0.13_windows-x64_bin" I executed this at the command line and the computer shut off. java.exe" -jar portmapper.jar I've read the github page.
How to install and run
Hi! You need Java 11 or later. Then you download the portmapper jar file and either double click it or execute the following on the command line: java -jar portmapper.jar You can find detailed instructions on https://github.com/kaklakariada/portmapper#readme Hope that helps!
How to install and run
What do you mean?
sbi
Which Java Version do you use? Please use Java 11. Please send the output of java -version java -jar <portmapper.jar></portmapper.jar>
I have this problem too, idk what to do
What error messages so you get? I can help you if you give me more details.
Latest java version, latest port mapper, still won't open. getting two java errors. followed all info here, through the help faq, nothing works.
To test if port forwarding works, you could try the the following: Open your routers web interface and check if it shows the port mapping Start a server using the forwarded port and try accessing it from another host, e.g. a port checker service. Make sure the server is running on the correct port, else the port check will return an invalid result.
ok im confused now. when using upnp wizard it used to say it couldnt see a upnp device thing but now i can... except it still doesn't seem to be working. how could i check if it's working? i tried using a website (portchecker.co) but nothing. i tried hosting a server for my friend but they couldn't seem to join.
Hello Anonymous, What is the problem you are having? Screenshots an log are looking good. You can ignore the message about the invalid port number as long as 192.168.#.### is the correct internal IP address of your machine.
Hello Anonymous, What is the problem you are having? Screenshots an log are looking good.
Invalid Router Port
ok i have figured out that it isnt my computer's fault the program isn't forwarding the port, something is most likely wrong with the internet or modem. i know this because i tested it on 2 different computers. also, you can remove my previous post
The only thing you could try is to delete the port mappings in you router's web interface and try again. If this doesn't help I run out of ideas.
it still seems to not port forward, i use a port checker on both port 25565 and 27015 (which i'm forwarding to) and it shows up as closed. i try and host a server and connect to it, and it doesn't work.
Hi Anonymous, according to your log, the port mapping was added successfully. If you are talking about message "Got error response when fetching port mapping...": This is normal as described at https://github.com/kaklakariada/portmapper#error-when-fetching-port-mappings and does not mean there is a problem.
this happens when i do java -jar portmapper-2.2.1.jar -add -externalPort 25565 -internalPort 25565 -protocol tcp in cmd 18:30:57.959 [main] INFO org.chris.portmapper.PortMapperCli - Creating router factory for class org.chris.portmapper.router.cling.ClingRouterFactory 18:30:57.963 [main] DEBUG org.chris.portmapper.PortMapperCli - Creating a new instance of the router factory class org.chris.portmapper.router.cling.ClingRouterFactory 18:30:57.974 [main] INFO org.chris.portmapper.PortMapperCli - Searching...
java 11 does work but then minecraft wont work because it becomes openjdk and minecraft doesnt like that
Great to hear, thanks for the feedback! I will add this to the troubleshooting guide.
Hello Christoph, I followed the guide to no avail, but I have since found that having a network bridge active on the computer prevents detection of a gateway, this is none the less a great software tool, thank you for using your time to develop it. Best regards, Anonymous User.
Hi Melo, i created a new issue in Github: https://github.com/kaklakariada/portmapper/issues/72 I can't promise if or when I will have time to look into this. Kind regards, Christoph.
export ports created and recover it later
Hi Christian, i created a new issue in Github: https://github.com/kaklakariada/portmapper/issues/71 I can't promise if or when I will have time to implement this. Kind regards, Christoph.
Could not find router
Hi Anonymous, please follow the troubleshooting guide at https://github.com/kaklakariada/portmapper#troubleshooting Kind regards, Christoph.
error code 713
Hi Anonymous, please follow the troubleshooting guide at https://github.com/kaklakariada/portmapper#troubleshooting add port mappings. The error message you get is expected, see the description here: https://github.com/kaklakariada/portmapper#error-when-fetching-port-mappings Kind regards, Christoph.
Dynamic IP Messes Up Port Mappings
Hi Anonymous, looks like your router does not allow deleting port mappings from a different internal IP address via UPnP. Please try to delete the mappings via your routers web interface. Kind regards, Christoph.
Could not find router
error code 713
Dynamic IP Messes Up Port Mappings
Does the error message contain the text "Stop getting more entries."? In this case there is no problem, it's just a limitation of the UPnP protocol. See this link for details: https://github.com/kaklakariada/portmapper#error-when-fetching-port-mappings
Please help me, i just want to make a tf2 server.
I have an error that i want to fix
As seen in the photo, when I save the preset, any identical internal ports get set to 1. (Both the second and third mappings were set to 78 before saving) -edited screenshot for clarity
As seen in the photo, when I save the preset, any identical internal ports get set to 1. (Both the second and third mappings were set to 78 before saving)
As seen in the photo, when I save the preset, any identical internal ports get set to 1.
export ports created and recover it later
Root element name is not <root>: soap:Envelope
Hello You should use weUpNPRouterFactory for your MapperSettings. It works for me. Thanks Can confirm this worked for me, thanks for the tip.
oof
Map expires
Please use Java 11, see https://github.com/kaklakariada/portmapper#portmapper-fails-to-start
C:\Users\Måns\Desktop\Port>java -jar portmapper.jar Error: A JNI error has occurred, please check your installation and try again Exception in thread "main" java.lang.UnsupportedClassVersionError: org/chris/portmapper/PortMapperStarter has been compiled by a more recent version of the Java Runtime (class file version 55.0), this version of the Java Runtime only recognizes class file versions up to 52.0 at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClass(Unknown...
Wrong XML namespace
I did all of the following things that it said, but still can't find router, do i need to change the client ip ?
Please try the suggestens from the troubleshooting section: https://github.com/kaklakariada/portmapper/blob/master/README.md#router-not-found
Thanks, the previous version works. One question, do you know how i can port a tf2 server with this ? I get "WARN Could not connect to router: Did not find a router"
Same issue here... Ubuntu 32 bits 16.04LTE with JRE installed moments ago from canonical.
Please run the program from the command line (java -jar portmapper.jar) and send the output. As a workaround please use the previous version.
Same here
Error: A JNI error has occurred
UPnP PortMapper 2.2.0 released
Error Code 606
Error Response When Fetching Port Mapping
Weird, i unblocked it and it still doesn't work, but well i am trying to host a game for a bunch of friends and it seems not to work, i changed port settings, but well...
hi ,in my case, portmaper doesn't map ports, everything is blank, and i still can't open ports, what does that mean?
I tried them all except the dummy and nothing worked.