When I convert an image from the CR2 to jpg with scale option, Iam seeing that pictures containes black lines on the edges of the sides. Has any one noticed this?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Regards,
Niels Kristian
To: 434060@discussion.ufraw.p.re.sf.net
From: rnataraja@users.sf.net
Subject: [ufraw:discussion] ufraw-batch convert creates black lines on the sides..
Date: Wed, 5 Aug 2015 14:17:42 +0000
ufraw-batch xyz.CR2 --shrink=4 --out-type=jpeg --output large
Iam using the command as above.
ufraw-batch convert creates black lines on the sides..
The one attached had problem on the right side edge. The camera model is canon Rebel version. Origianl Format is Canon Raw. I converted it to JPG using the command
ufraw-batch xyz.CR2 --shrink=4 --out-type=jpeg --output large
Thanks
Rajesh.
Thanks for the sample. The black lines are caused by lens distortion corrections. You should add one of these options to the command line: --lensfun=none to disable corrections or --auto-crop to remove the black lines.
Regards,
Niels Kristian
To: 434060@discussion.ufraw.p.re.sf.net
From: rnataraja@users.sf.net
Subject: [ufraw:discussion] ufraw-batch convert creates black lines on the sides..
Date: Fri, 7 Aug 2015 13:47:49 +0000
The one attached had problem on the right side edge. The camera model is canon Rebel version. Origianl Format is Canon Raw. I converted it to JPG using the command
ufraw-batch xyz.CR2 --shrink=4 --out-type=jpeg --output large
Thanks
Rajesh.
Attachments:
IMG_1718.CR2 (27.5 MB; application/octet-stream)
ufraw-batch convert creates black lines on the sides..
When I convert an image from the CR2 to jpg with scale option, Iam seeing that pictures containes black lines on the edges of the sides. Has any one noticed this?
ufraw-batch xyz.CR2 --shrink=4 --out-type=jpeg --output large
Iam using the command as above.
Which camera model does the raw file come from?
Please link to a test file showing the problem.
Regards,
Niels Kristian
To: 434060@discussion.ufraw.p.re.sf.net
From: rnataraja@users.sf.net
Subject: [ufraw:discussion] ufraw-batch convert creates black lines on the sides..
Date: Wed, 5 Aug 2015 14:17:42 +0000
ufraw-batch xyz.CR2 --shrink=4 --out-type=jpeg --output large
Iam using the command as above.
ufraw-batch convert creates black lines on the sides..
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/ufraw/discussion/434060/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
The one attached had problem on the right side edge. The camera model is canon Rebel version. Origianl Format is Canon Raw. I converted it to JPG using the command
ufraw-batch xyz.CR2 --shrink=4 --out-type=jpeg --output large
Thanks
Rajesh.
Thanks for the sample. The black lines are caused by lens distortion corrections. You should add one of these options to the command line: --lensfun=none to disable corrections or --auto-crop to remove the black lines.
Regards,
Niels Kristian
To: 434060@discussion.ufraw.p.re.sf.net
From: rnataraja@users.sf.net
Subject: [ufraw:discussion] ufraw-batch convert creates black lines on the sides..
Date: Fri, 7 Aug 2015 13:47:49 +0000
The one attached had problem on the right side edge. The camera model is canon Rebel version. Origianl Format is Canon Raw. I converted it to JPG using the command
ufraw-batch xyz.CR2 --shrink=4 --out-type=jpeg --output large
Thanks
Rajesh.
Attachments:
IMG_1718.CR2 (27.5 MB; application/octet-stream)
ufraw-batch convert creates black lines on the sides..
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/ufraw/discussion/434060/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
Thanks Niels. I will try this.
Rajesh.