ubertooth-general — General discussion for Project Ubertooth

[Ubertooth-general] Ubertooth-one Interference

[sopan s. <sop...@gm...>]

Hello and good morning,

I have been playing around with Ubertooth for a while now and I have a
question regarding the inference mode. Can Ubertooth follow and interfere
with a connection at the same time? To be more specific, I am using this
command ubertooth-btle -f -I

Thank you.
 Sopan Sarkar

[Ubertooth-general] Btle tx

[Dermot M. <der...@sk...>]

<div dir='auto'>I am trying to send a btle packet. I have used the bt_slave_le function and added a few other bytes to it. I have copied the bytes from a previously captured packet so i know they are valid.&nbsp;<div dir="auto">Initially i had a problem with corrupt bytes after 16 bytes which i think is a known issue. I got round this by sending the data all in one go. I know the fifo is 32 bytes.</div><div dir="auto">Anyway my question is if i send 22bytes of data i can receive this valid packet on another sniffing ubertooth packet. If i send 23 bytes this last byte does not get through and there is an attempt to read past end of buffer error. The maximum valid packet size allowed to be transmitted is 36 bytes. Why is this?</div></div>

Re: [Ubertooth-general] Issue Updating FW to 2018-08-R1

[Dominic S. <dom...@gm...>]

On Wed, 31 Oct 2018 at 11:18, Nick Cerny <ni...@gm...> wrote:
>
> Starting to work with Ubertooth for the first time and have run into an
issue flashing my device.
>
> I am attempting to upgrade some hardware from version 2015-10-R1 to
2018-08-R1 on the Buscador OS from Michael Bazzel (Ubuntu 16.04.5 LTS).
>
> I receive the “libUSB Error: Command Error: (-1)” and the Ubertooth’s 4
leds are in a chasing pattern.

That's in DFU mode.  Now try `ubertooth-dfu -d
bluetooth-rxtx/bluetooth_rxtx.dfu`

> The device is unreadable in this state.

Do you see it in the output of lsusb?  It will either show up as an
OpenMoko device (where we got our USB ID) or as ffff:0004

> I followed the instructions on github running the make clean all && make
in the firmware dir and get the same result when using the ubertooth-dfu -r
-d bluetooth-rxtx/bluetooth_rxtx.dfu command.
>
> Any suggestions? Is my only option to set it in dfu manually with the 1st
and 3rd pins?

Are you running inside a virtual machine?  As the device changes USB ID
when entering DFU mode, it needs to be passed through to your VM too.

Dominic

[Ubertooth-general] Issue Updating FW to 2018-08-R1

[Nick C. <ni...@gm...>]

Hello all!

Starting to work with Ubertooth for the first time and have run into an
issue flashing my device.

I am attempting to upgrade some hardware from version 2015-10-R1 to
2018-08-R1 on the Buscador OS from Michael Bazzel (Ubuntu 16.04.5 LTS).

I receive the “libUSB Error: Command Error: (-1)” and the Ubertooth’s 4
leds are in a chasing pattern.

The device is unreadable in this state.

I followed the instructions on github running the make clean all && make in
the firmware dir and get the same result when using the ubertooth-dfu -r -d
bluetooth-rxtx/bluetooth_rxtx.dfu command.

Any suggestions? Is my only option to set it in dfu manually with the 1st
and 3rd pins?

[Ubertooth-general] Ubertooth SNR

[AlSallakh, M. M. <mu...@ou...>]

Hello,
I am working on a project using ubertooth one 2017 code. I just need to know how reliable the snr readings coming from the ubertooth, and would like to find some resources to further more  explain ubertooth features.

Regards,
Munzer

[Ubertooth-general] Transmit packets at multichannel at the same time?

[Jianliang <asl...@gm...>]

Hi,

I'm new to Ubertooth One and I'd like to send a page packet from Ubertooth
One to another device.
How can I do that? Is the firmware modification needed?
Is that possible for Ubertooth One to transmit a page packet at
multichannel at the same time?

Thanks in advance,
Best,
Allen

Re: [Ubertooth-general] [WireShark] Source and Destination

[Dominic S. <dom...@gm...>]

On Sat, 21 Jul 2018 at 16:53, Eric Huang <eri...@ne...> wrote:
>
> Hi dear
>   I have followed Build Guide and Capturing BLE in Wireshark. I am able
to see all the protocols in correct way. But I'm not able to see the
destination and source address. It is empty.

It has been a while since I looked, but I believe that the source and
destination fields are unused for BLE captures from Ubertooth.  The address
field that you are looking for should still be broken out in the parsed
data for each packet.

> I'm currently using ubuntu 14.04. Fireware is 2017-03-R2.
> Wireshark is 1.12.1
>
> I also did:
>
> Under DLT, select "User 0 (DLT=147)" (adjust this selection as
appropriate if the error message showed a different DLT number than 147)
> Under Payload Protocol, enter: btle
>
> for some reason I have to get the source and destination address to work.

[Ubertooth-general] [WireShark] Source and Destination

[Eric H. <eri...@ne...>]

Hi dear
  I have followed Build Guide
<https://github.com/greatscottgadgets/ubertooth/wiki/Build-Guide> and Capturing
BLE in Wireshark
<https://github.com/greatscottgadgets/ubertooth/wiki/Capturing-BLE-in-Wireshark>.
I am able to see all the protocols in correct way. But I'm not able to see
the destination and source address. It is empty.

I'm currently using ubuntu 14.04. Fireware is 2017-03-R2.
Wireshark is 1.12.1

I also did:

   1. Under DLT, select "User 0 (DLT=147)" (adjust this selection as
   appropriate if the error message showed a different DLT number than 147)
   2. Under Payload Protocol, enter: btle


for some reason I have to get the source and destination address to work.

Thank you

[Ubertooth-general] [ubertooth one] is this support BLE 4.1

[Eric H. <eri...@ne...>]

Hi Dear
  I have a smartwatch with BLE 4.1 and an android phone. I need to record
the PDU between those two devices after they paired. Is ubertooth one
support it? The record needs to contain the PDU length are the timestamp.
It doesn't matter the messages are encrypted.

Thank you.

[Ubertooth-general] Decoding a Bluetooth signal and packets

[Coundjidapadame V. <vik...@gm...>]

 Hello everybody,

I am currently working on a project which aim to detect Bluetooth and
decode Bluetooth packets (I use a Hack RF One to make the detection). I
have made a Gnuradio Flowgraph in order to demodulate Bluetooth signal and
I am trying to decode visualy the packets by searching a Bluetooth frame on
a binary file.
Unfortunately, I didn't succeed to recover a clear view of the Bluetooth
signal. To be precise, I am pretty sure that I detect Bluetooth on my sinks
but when sending this to a Clock Recovery + Binary Slicer blocks, I am
unable to recover interresting data in the binary file (especially the MAC
adress of the sending device, which is part of the a Bluetooth packet).
Moreover, I would like to know what type of network layer (physical,
transport, baseband...) is intercepted in this type of process. In my case,
I aim to intercept baseband layer packets. Moreover, I am interrested in
knowing how to use the gr-bluetooth because I can't find a lot of
documentation concerning this block. I think this can be interresting for
the development of my project.
Could you please, give me your view, opinion about this problem ? I am
stucked at this stage without knowing the exact origin of my issue. (I have
enclosed my flowgraph and a screenshot of one of my Bluetooth detection if
you want to take a look at my work).

Thank you very much,
Best regards

Vikenesh

[Ubertooth-general] Squelch level not affecting RSSI

[Jose P. <jou...@gm...>]

Hello,

I am trying to play with the squelch level in order to limit the number of
packets to be processed, and therefore trying to reduce CPU usage in the
host.

Unfortunately I cannot see any difference in the RSSI of the received
packets. It looks like it is ignoring the the selected squelch level.

Some of the tests I did:

$ ubertooth-util -z-50
Setting squelch to -50

$ ubertooth-util -z
Squelch set to -50

After setting squelch to -50, I was not expecting to see packets with rssi
lower than that, however, as you can see below, it does not affect at all:

i.e: ... s=-75 ...

$ ubertooth-rx
systime=1525021214 ch= 0 LAP=cd9a8a err=1 clkn=42 clk_offset=2865 s=-75
n=-55 snr=-20
systime=1525021215 ch=51 LAP=9e8b33 err=0 clkn=1206 clk_offset=2170 s=-49
n=-55 snr=6
systime=1525021215 ch=55 LAP=cd9a8a err=1 clkn=2554 clk_offset=2934 s=-51
n=-55 snr=4
systime=1525021215 ch= 8 LAP=9e8b33 err=0 clkn=2563 clk_offset=5345 s=-53
n=-55 snr=2
systime=1525021216 ch=57 LAP=9e8b33 err=0 clkn=3118 clk_offset=2225 s=-45
n=-55 snr=10
systime=1525021216 ch=27 LAP=9e8b33 err=2 clkn=3656 clk_offset=2531 s=-45
n=-55 snr=10
systime=1525021216 ch=59 LAP=9e8b33 err=0 clkn=3717 clk_offset=5641 s=-52
n=-55 snr=3
systime=1525021216 ch=61 LAP=9e8b33 err=0 clkn=4437 clk_offset=4395 s=-74
n=-55 snr=-19
systime=1525021216 ch=63 LAP=9e8b33 err=2 clkn=5021 clk_offset=4433 s=-55
n=-55 snr=0
systime=1525021216 ch=63 LAP=9e8b33 err=1 clkn=5117 clk_offset=4422 s=-63
n=-55 snr=-8
systime=1525021217 ch=67 LAP=9e8b33 err=0 clkn=6381 clk_offset=4491 s=-73
n=-55 snr=-18
...


Any idea what am I doing wrong?
Isn't the squelch thought for this?

Thanks in advance
BR

[Ubertooth-general] Detecting BlueBorne with Ubertooth

[Kermenjy M S. <kms...@st...>]

Greetings,

I am a student at Delaware State University and I am working on a capstone that uses Ubertooth to detect if a Blueborne exploit has been initiated on a device.

So far I have captured the packets to a txt file and used python regex to parse them to a csv but I have to normalize the data in order to feed it into Keras. My question is what is the maximum length can the data section of BLE advertising packets be?

Also what your thoughts on the project?

Thank you for your time,

Kurt
Delaware State University
[cid:image001.png@01D32703.9110AA50]

[Ubertooth-general] RSSI value

[Suman B. <su...@sb...>]

Hi,



I saw that RSSI value from BLE devices fluctuate too much. Is it a limitation of Ubertooth?



-Suman

[Ubertooth-general] Advertising Packets

[Josh R. <jar...@co...>]

<div dir='auto'>Hello, I am attempting to sniff packets coming from a Bluetooth low energy device. I am using the ubertooth is follow mode and I can see the advertising packets of the device I want to sniff. However, once that device makes a connection, I cannot see anymore packets from that device. What am I doing wrong? I am using wireshark and I'm feeding the ubertooth data into a pipe and reading that information from wireshark.&nbsp;<div dir="auto"><br></div><div dir="auto">Thanks!</div><div dir="auto"><br></div><div dir="auto">Josh</div></div>

[Ubertooth-general] Ubertooth One

[Joshua P. <jos...@ve...>]

Hello All,

Quick question about the Ubertooth One functionalities. I know it is made
for sniffing BT packets but i was wondering if there is any way i can
connect to the Ubertooth via bluetooth.

My question is does the Ubertooth One have the same functionalities of
standard bluetooth device? I want to see if i can perform IP over bluetooth
using the ubertooth. Any help would be greatly appreciated!

Thanks,
Josh

[Ubertooth-general] RSSI measurement in two different functions

[Uddin, M. (N. - US/Holmdel) <mos...@no...>]

Hello,

I see that in two different functions, 'bt_generic_le'  and 'bt_le_sync',
you measure RSSI in two different ways while you are waiting for DMA interrupt. I know in one function you are getting the data without sync word, and in another with sync word respectively. Does it have anything to do with the RSSI measurement technique?
I also see function 'bt_stream_rx'
Has similar approach of reading RSSI value (inside while loop) while waiting for DMA interrupt.
What are the difference between this two approach?

Regards
Mostafa

Re: [Ubertooth-general] Ubertooth completely not detected

[Dominic S. <dom...@gm...>]

On 6 December 2017 at 13:42, <Ad...@ma...> wrote:
>
> If that was the case, would've done this a while ago. I received it from
a friend I no longer have contact with unfortunately. Not sure where he
purchased it aswell but I received the Ubertooth 2 months ago.

All replacements are handled by the appropriate reseller, so I think your
best option is to try to get in contact with the friend who originally
purchased the Ubertooth and find out who the reseller was.

Thanks,
  Dominic

> On 06/12/2017, 21:37 Dominic Spill <dom...@gm...> wrote:
>>
>> On 6 December 2017 at 13:20, <Ad...@ma...> wrote:
>> >
>> > Just letting you know my eye sight isn't the best hahaha. I don't see
any big marks. I took really good care of it. Kept it in an anti static
bag, if it wasn't in the bag it was in a case. So what can be done about
this?
>>
>> It doesn't sound like there's much that can be done to fix it.  How long
ago did you buy it?  I recommend contacting the reseller who sold it and
telling them that you've worked with me to debug it, but we couldn't get it
working again.
>>
>> Thanks,
>>   Dominic
>>
>> > On 06/12/2017, 20:58 Dominic Spill <dom...@gm...> wrote:
>> >>
>> >> On 6 December 2017 at 12:15, Adam Knap <Ad...@ma...> wrote:
>> >> >
>> >> > I just bent some solder and done as you did in the image when i
connected it to the usb host.
>> >> >
>> >> > I have tried multiple usb ports in different devices, my work
computer, my laptop, friend's laptop. all different operating systems.
>> >> >
>> >> > Just attempted doing "dmesg -w" and nothing new showed up.
>> >>
>> >> It sounds like the hardware has been damaged in some way.  Is there
any visible damage, changed colour, etc, especially near the USB connector?
>> >>
>> >> > Sent: Wednesday, December 06, 2017 at 8:07 PM
>> >> > From: "Dominic Spill" <dom...@gm...>
>> >> > To: "Adam Knap" <Ad...@ma...>
>> >> >
>> >> > Cc: "Ubertooth Discussion" <ube...@li...>
>> >> > Subject: Re: [Ubertooth-general] Ubertooth completely not detected
>> >> > On 6 December 2017 at 11:43, Adam Knap <Ad...@ma...> wrote:
>> >> > >
>> >> > > >1) Do any of the LEDs illuminate when you connect the Ubertooth
to a USB port?  If so, which?
>> >> > > Unfortunately, None of the LEDs light up.
>> >> >
>> >> > This doesn't sound good.  Could you try connecting the two pins
shown in this photo as you connect it to the USB host?
https://pbs.twimg.com/profile_banners/19587312/1354079866/1500x500
>> >> >
>> >> > > 2) Did it previously work?  Or is this a brand new Ubertooth that
isn't working?
>> >> > > It did for roughly 2 months, I received it 2 months ago from a
friend. It hasn't gone under any rough usage, i always kept it in an anti
static bag aswell.
>> >> >
>> >> > It sounds like something could have damaged it, possibly a
misbehaving USB port?
>> >> >
>> >> > > >3) If you're connecting it to a Linux host, could you check the
output of `dmesg` and see if anything appears when connecting the Ubertooth?
>> >> > > The output is too big to copy, but I had a thorough (that's why
it took me a while to answer) look through the output and nothing regarding
the ubertooth or "Great Scott Gadgets", showed up.
>> >> >
>> >> > A trick for doing this more easily is to run `dmesg -w` before
connecting the Ubertooth, any new output should be related.  I see the
following when I connect mine:
>> >> >
>> >> > [77959.599880] usb 1-1: new full-speed USB device number 9 using
xhci_hcd
>> >> > [77959.741541] usb 1-1: New USB device found, idVendor=1d50,
idProduct=6002
>> >> > [77959.741548] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
>> >> > [77959.741552] usb 1-1: Product: bluetooth_rxtx
>> >> > [77959.741556] usb 1-1: Manufacturer:
http://github.com/greatscottgadgets/ubertooth
>> >> > [77959.741559] usb 1-1: SerialNumber:
12f91717850c5353b53f184d040000f5
>> >> >
>> >> >
>> >> > > Sent: Wednesday, December 06, 2017 at 6:35 PM
>> >> > > From: "Dominic Spill" <dom...@gm...>
>> >> > > To: Ad...@ma...
>> >> > > Cc: "Ubertooth Discussion" <
ube...@li...>
>> >> > > Subject: Re: [Ubertooth-general] Ubertooth completely not detected
>> >> > > On 6 December 2017 at 00:54, <Ad...@ma...> wrote:
>> >> > > >
>> >> > > > Hello, I have been told to contact you regarding support for
the Ubertooth.
>> >> > >
>> >> > > You've come to the right place.
>> >> > >
>> >> > > > Basically it is completely undetected by any device that I have
tried it on, I have tried different operating systems as well with no
success. Could you please help me?
>> >> > >
>> >> > > Could you give us some more information to help solve this.
>> >> > >
>> >> > > 1) Do any of the LEDs illuminate when you connect the Ubertooth
to a USB port?  If so, which?
>> >> > >
>> >> > > 2) Did it previously work?  Or is this a brand new Ubertooth that
isn't working?
>> >> > >
>> >> > > 3) If you're connecting it to a Linux host, could you check the
output of `dmesg` and see if anything appears when connecting the Ubertooth?
>> >> > >
>> >> > > Thanks,
>> >> > >   Dominic
>> >> > >
>> >> >
>> >> >
>>

Re: [Ubertooth-general] Ubertooth completely not detected

[Dominic S. <dom...@gm...>]

On 6 December 2017 at 13:20, <Ad...@ma...> wrote:
>
> Just letting you know my eye sight isn't the best hahaha. I don't see any
big marks. I took really good care of it. Kept it in an anti static bag, if
it wasn't in the bag it was in a case. So what can be done about this?

It doesn't sound like there's much that can be done to fix it.  How long
ago did you buy it?  I recommend contacting the reseller who sold it and
telling them that you've worked with me to debug it, but we couldn't get it
working again.

Thanks,
  Dominic

> On 06/12/2017, 20:58 Dominic Spill <dom...@gm...> wrote:
>>
>> On 6 December 2017 at 12:15, Adam Knap <Ad...@ma...> wrote:
>> >
>> > I just bent some solder and done as you did in the image when i
connected it to the usb host.
>> >
>> > I have tried multiple usb ports in different devices, my work
computer, my laptop, friend's laptop. all different operating systems.
>> >
>> > Just attempted doing "dmesg -w" and nothing new showed up.
>>
>> It sounds like the hardware has been damaged in some way.  Is there any
visible damage, changed colour, etc, especially near the USB connector?
>>
>> > Sent: Wednesday, December 06, 2017 at 8:07 PM
>> > From: "Dominic Spill" <dom...@gm...>
>> > To: "Adam Knap" <Ad...@ma...>
>> >
>> > Cc: "Ubertooth Discussion" <ube...@li...>
>> > Subject: Re: [Ubertooth-general] Ubertooth completely not detected
>> > On 6 December 2017 at 11:43, Adam Knap <Ad...@ma...> wrote:
>> > >
>> > > >1) Do any of the LEDs illuminate when you connect the Ubertooth to
a USB port?  If so, which?
>> > > Unfortunately, None of the LEDs light up.
>> >
>> > This doesn't sound good.  Could you try connecting the two pins shown
in this photo as you connect it to the USB host?
https://pbs.twimg.com/profile_banners/19587312/1354079866/1500x500
>> >
>> > > 2) Did it previously work?  Or is this a brand new Ubertooth that
isn't working?
>> > > It did for roughly 2 months, I received it 2 months ago from a
friend. It hasn't gone under any rough usage, i always kept it in an anti
static bag aswell.
>> >
>> > It sounds like something could have damaged it, possibly a misbehaving
USB port?
>> >
>> > > >3) If you're connecting it to a Linux host, could you check the
output of `dmesg` and see if anything appears when connecting the Ubertooth?
>> > > The output is too big to copy, but I had a thorough (that's why it
took me a while to answer) look through the output and nothing regarding
the ubertooth or "Great Scott Gadgets", showed up.
>> >
>> > A trick for doing this more easily is to run `dmesg -w` before
connecting the Ubertooth, any new output should be related.  I see the
following when I connect mine:
>> >
>> > [77959.599880] usb 1-1: new full-speed USB device number 9 using
xhci_hcd
>> > [77959.741541] usb 1-1: New USB device found, idVendor=1d50,
idProduct=6002
>> > [77959.741548] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
>> > [77959.741552] usb 1-1: Product: bluetooth_rxtx
>> > [77959.741556] usb 1-1: Manufacturer:
http://github.com/greatscottgadgets/ubertooth
>> > [77959.741559] usb 1-1: SerialNumber: 12f91717850c5353b53f184d040000f5
>> >
>> >
>> > > Sent: Wednesday, December 06, 2017 at 6:35 PM
>> > > From: "Dominic Spill" <dom...@gm...>
>> > > To: Ad...@ma...
>> > > Cc: "Ubertooth Discussion" <ube...@li...>
>> > > Subject: Re: [Ubertooth-general] Ubertooth completely not detected
>> > > On 6 December 2017 at 00:54, <Ad...@ma...> wrote:
>> > > >
>> > > > Hello, I have been told to contact you regarding support for the
Ubertooth.
>> > >
>> > > You've come to the right place.
>> > >
>> > > > Basically it is completely undetected by any device that I have
tried it on, I have tried different operating systems as well with no
success. Could you please help me?
>> > >
>> > > Could you give us some more information to help solve this.
>> > >
>> > > 1) Do any of the LEDs illuminate when you connect the Ubertooth to a
USB port?  If so, which?
>> > >
>> > > 2) Did it previously work?  Or is this a brand new Ubertooth that
isn't working?
>> > >
>> > > 3) If you're connecting it to a Linux host, could you check the
output of `dmesg` and see if anything appears when connecting the Ubertooth?
>> > >
>> > > Thanks,
>> > >   Dominic
>> > >
>> >
>> >

Re: [Ubertooth-general] Ubertooth completely not detected

[Dominic S. <dom...@gm...>]

On 6 December 2017 at 12:15, Adam Knap <Ad...@ma...> wrote:
>
> I just bent some solder and done as you did in the image when i connected
it to the usb host.
>
> I have tried multiple usb ports in different devices, my work computer,
my laptop, friend's laptop. all different operating systems.
>
> Just attempted doing "dmesg -w" and nothing new showed up.

It sounds like the hardware has been damaged in some way.  Is there any
visible damage, changed colour, etc, especially near the USB connector?

> Sent: Wednesday, December 06, 2017 at 8:07 PM
> From: "Dominic Spill" <dom...@gm...>
> To: "Adam Knap" <Ad...@ma...>
>
> Cc: "Ubertooth Discussion" <ube...@li...>
> Subject: Re: [Ubertooth-general] Ubertooth completely not detected
> On 6 December 2017 at 11:43, Adam Knap <Ad...@ma...> wrote:
> >
> > >1) Do any of the LEDs illuminate when you connect the Ubertooth to a
USB port?  If so, which?
> > Unfortunately, None of the LEDs light up.
>
> This doesn't sound good.  Could you try connecting the two pins shown in
this photo as you connect it to the USB host?
https://pbs.twimg.com/profile_banners/19587312/1354079866/1500x500
>
> > 2) Did it previously work?  Or is this a brand new Ubertooth that isn't
working?
> > It did for roughly 2 months, I received it 2 months ago from a friend.
It hasn't gone under any rough usage, i always kept it in an anti static
bag aswell.
>
> It sounds like something could have damaged it, possibly a misbehaving
USB port?
>
> > >3) If you're connecting it to a Linux host, could you check the output
of `dmesg` and see if anything appears when connecting the Ubertooth?
> > The output is too big to copy, but I had a thorough (that's why it took
me a while to answer) look through the output and nothing regarding the
ubertooth or "Great Scott Gadgets", showed up.
>
> A trick for doing this more easily is to run `dmesg -w` before connecting
the Ubertooth, any new output should be related.  I see the following when
I connect mine:
>
> [77959.599880] usb 1-1: new full-speed USB device number 9 using xhci_hcd
> [77959.741541] usb 1-1: New USB device found, idVendor=1d50,
idProduct=6002
> [77959.741548] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
> [77959.741552] usb 1-1: Product: bluetooth_rxtx
> [77959.741556] usb 1-1: Manufacturer:
http://github.com/greatscottgadgets/ubertooth
> [77959.741559] usb 1-1: SerialNumber: 12f91717850c5353b53f184d040000f5
>
>
> > Sent: Wednesday, December 06, 2017 at 6:35 PM
> > From: "Dominic Spill" <dom...@gm...>
> > To: Ad...@ma...
> > Cc: "Ubertooth Discussion" <ube...@li...>
> > Subject: Re: [Ubertooth-general] Ubertooth completely not detected
> > On 6 December 2017 at 00:54, <Ad...@ma...> wrote:
> > >
> > > Hello, I have been told to contact you regarding support for the
Ubertooth.
> >
> > You've come to the right place.
> >
> > > Basically it is completely undetected by any device that I have tried
it on, I have tried different operating systems as well with no success.
Could you please help me?
> >
> > Could you give us some more information to help solve this.
> >
> > 1) Do any of the LEDs illuminate when you connect the Ubertooth to a
USB port?  If so, which?
> >
> > 2) Did it previously work?  Or is this a brand new Ubertooth that isn't
working?
> >
> > 3) If you're connecting it to a Linux host, could you check the output
of `dmesg` and see if anything appears when connecting the Ubertooth?
> >
> > Thanks,
> >   Dominic
> >
>
>

Re: [Ubertooth-general] Ubertooth completely not detected

[Dominic S. <dom...@gm...>]

On 6 December 2017 at 11:43, Adam Knap <Ad...@ma...> wrote:
>
> >1) Do any of the LEDs illuminate when you connect the Ubertooth to a USB
port?  If so, which?
> Unfortunately, None of the LEDs light up.

This doesn't sound good.  Could you try connecting the two pins shown in
this photo as you connect it to the USB host?
https://pbs.twimg.com/profile_banners/19587312/1354079866/1500x500

> 2) Did it previously work?  Or is this a brand new Ubertooth that isn't
working?
> It did for roughly 2 months, I received it 2 months ago from a friend. It
hasn't gone under any rough usage, i always kept it in an anti static bag
aswell.

It sounds like something could have damaged it, possibly a misbehaving USB
port?

> >3) If you're connecting it to a Linux host, could you check the output
of `dmesg` and see if anything appears when connecting the Ubertooth?
> The output is too big to copy, but I had a thorough (that's why it took
me a while to answer) look through the output and nothing regarding the
ubertooth or "Great Scott Gadgets", showed up.

A trick for doing this more easily is to run `dmesg -w` before connecting
the Ubertooth, any new output should be related.  I see the following when
I connect mine:

[77959.599880] usb 1-1: new full-speed USB device number 9 using xhci_hcd
[77959.741541] usb 1-1: New USB device found, idVendor=1d50, idProduct=6002
[77959.741548] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[77959.741552] usb 1-1: Product: bluetooth_rxtx
[77959.741556] usb 1-1: Manufacturer:
http://github.com/greatscottgadgets/ubertooth
[77959.741559] usb 1-1: SerialNumber: 12f91717850c5353b53f184d040000f5


> Sent: Wednesday, December 06, 2017 at 6:35 PM
> From: "Dominic Spill" <dom...@gm...>
> To: Ad...@ma...
> Cc: "Ubertooth Discussion" <ube...@li...>
> Subject: Re: [Ubertooth-general] Ubertooth completely not detected
> On 6 December 2017 at 00:54, <Ad...@ma...> wrote:
> >
> > Hello, I have been told to contact you regarding support for the
Ubertooth.
>
> You've come to the right place.
>
> > Basically it is completely undetected by any device that I have tried
it on, I have tried different operating systems as well with no success.
Could you please help me?
>
> Could you give us some more information to help solve this.
>
> 1) Do any of the LEDs illuminate when you connect the Ubertooth to a USB
port?  If so, which?
>
> 2) Did it previously work?  Or is this a brand new Ubertooth that isn't
working?
>
> 3) If you're connecting it to a Linux host, could you check the output of
`dmesg` and see if anything appears when connecting the Ubertooth?
>
> Thanks,
>   Dominic
>

Re: [Ubertooth-general] Ubertooth completely not detected

[Dominic S. <dom...@gm...>]

On 6 December 2017 at 11:46, Tom S <tom...@to...> wrote:
>
> What is the expectation for what should happen when you 'plug this in'?
This is a diagnostic device, and it only functions in combination with
certain related software - you would not see any other reaction without
using one of those packages.

Two green LEDs light when power is applied.  A red one comes on when the
device has been enumerated by a USB host.  On the host system it should
appear in USB device lists, such as the output of lsusb or device manager.

Thanks,
  Dominic

> On 12/6/2017 9:35 AM, Dominic Spill wrote:
>
> On 6 December 2017 at 00:54, <Ad...@ma...> wrote:
> >
> > Hello, I have been told to contact you regarding support for the
Ubertooth.
>
> You've come to the right place.
>
> > Basically it is completely undetected by any device that I have tried
it on, I have tried different operating systems as well with no success.
Could you please help me?
>
> Could you give us some more information to help solve this.
>
> 1) Do any of the LEDs illuminate when you connect the Ubertooth to a USB
port?  If so, which?
>
> 2) Did it previously work?  Or is this a brand new Ubertooth that isn't
working?
>
> 3) If you're connecting it to a Linux host, could you check the output of
`dmesg` and see if anything appears when connecting the Ubertooth?
>
> Thanks,
>   Dominic
>
>
>
>
------------------------------------------------------------------------------
>
> Check out the vibrant tech community on one of the world's most
>
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>
>
>
> _______________________________________________
>
> Ubertooth-general mailing list
>
> Ube...@li...
>
> https://lists.sourceforge.net/lists/listinfo/ubertooth-general
>
>
>
>
------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Ubertooth-general mailing list
> Ube...@li...
> https://lists.sourceforge.net/lists/listinfo/ubertooth-general
>

Re: [Ubertooth-general] Ubertooth completely not detected

[Tom S <tom...@to...>]

What is the expectation for what should happen when you 'plug this in'?  
This is a diagnostic device, and it only functions in combination with 
certain related software - you would not see any other reaction without 
using one of those packages.


On 12/6/2017 9:35 AM, Dominic Spill wrote:
> On 6 December 2017 at 00:54, <Ad...@ma... <mailto:Ad...@ma...>> 
> wrote:
> >
> > Hello, I have been told to contact you regarding support for the 
> Ubertooth.
>
> You've come to the right place.
>
> > Basically it is completely undetected by any device that I have 
> tried it on, I have tried different operating systems as well with no 
> success. Could you please help me?
>
> Could you give us some more information to help solve this.
>
> 1) Do any of the LEDs illuminate when you connect the Ubertooth to a 
> USB port?  If so, which?
>
> 2) Did it previously work?  Or is this a brand new Ubertooth that 
> isn't working?
>
> 3) If you're connecting it to a Linux host, could you check the output 
> of `dmesg` and see if anything appears when connecting the Ubertooth?
>
> Thanks,
>   Dominic
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org!http://sdm.link/slashdot
>
>
> _______________________________________________
> Ubertooth-general mailing list
> Ube...@li...
> https://lists.sourceforge.net/lists/listinfo/ubertooth-general

Re: [Ubertooth-general] Ubertooth completely not detected

[Dominic S. <dom...@gm...>]

On 6 December 2017 at 00:54, <Ad...@ma...> wrote:
>
> Hello, I have been told to contact you regarding support for the
Ubertooth.

You've come to the right place.

> Basically it is completely undetected by any device that I have tried it
on, I have tried different operating systems as well with no success. Could
you please help me?

Could you give us some more information to help solve this.

1) Do any of the LEDs illuminate when you connect the Ubertooth to a USB
port?  If so, which?

2) Did it previously work?  Or is this a brand new Ubertooth that isn't
working?

3) If you're connecting it to a Linux host, could you check the output of
`dmesg` and see if anything appears when connecting the Ubertooth?

Thanks,
  Dominic

[Ubertooth-general] Ubertooth completely not detected

[<Ad...@ma...>]

<html><head/><body>Hello, I have been told to contact you regarding support for the Ubertooth. Basically it is completely undetected by any device that I have tried it on, I have tried different operating systems as well with no success. Could you please help me? Thank you<br>
</body></html>

[Ubertooth-general] Windows Support

[Srijan M. <sr...@as...>]

Just purchased Ubertooth One. I couldn't get it to working on Windows
machine what so ever. The support page on github only gave
instructions for Ubuntu, Mac. I have Wireshark 12.1 installed. And
made the necessary changes as mentioned in the page, but I don't see
any packets. My objective is to sniff packet transfer between a
smartphone app and a BLE device. How can I get this?


*Srijan Magapu, Embedded Software Engineer*

*Adaptive Sound Technologies, Inc.*
1475 S Bascom Ave, Ste 116; Campbell, CA 95008-0646
Ph: 408-3 <408-859-1983>77-3411; Email: sr...@as...
<ir...@as...>; Web: http://ASTICorp.com <http://asticorp.com/>

*To learn more about our products please visit:*
http://SoundofSleep.com <http://soundofsleep.com/> and http://LectroFan.com
<http://lectrofan.com/>

*"Adaptive Audio, Improving Lives"*