[tuxracer-devel] tuxracer makes my X11 Segment!

[eric k. <arc...@db...>]

This message was sent from Geocrawler.com by "eric kmetz" <er...@ve...>
Be sure to reply to that address.

Okay so I just bought this nvidia TNT2 32MB video
card about a week ago.  Got their glx.so/libGL
drivers and their X server.  Got quake3 up and
going but tuxracer basically broke my X.

So i visited utah-glx, recompiled Mesa GL/GLU/glut
with nv driver support, installed, swapped back to
normal SVGA X server with the utah glx module
still loading.

And still tuxracer crashes my X server. I've tried
./configure'ing --with-x.. thats about the extend
of things.

Heres the X server output:

XFree86 Version 3.3.5 / X Window System
(protocol Version 11, revision 0, vendor release
6300)
Release Date: August 23 1999
        If the server is older than 6-12 months,
or if your card is newer
        than the above date, look for a newer
version before reporting
        problems.  (see
http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.5-15 i686 [ELF]
Configured drivers:
  SVGA: server for SVGA graphics adaptors
(Patchlevel 0):
      NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2,
RIVA ULTRA TNT2,
      RIVA VANTA, RIVA ULTRA VANTA, RIVA
INTEGRATED, GeForce 256,
      GeForce DDR, Quadro, generic
(using VT number 7)

XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for
probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: Microsoft, device: /dev/mouse,
baudrate: 1200
(**) Mouse: buttons: 3
(**) SVGA: Graphics device ID: "Primary Card"
(**) SVGA: Monitor ID: "Primary Monitor"
(--) no ModulePath specified using default:
/usr/X11R6/lib/modules
Sucessfully loaded XFree86 3.3 symbols
        GLX extension module for XFree86 3.3.3.1
-- Mesa version 3.1
                GLX package version 0.9, GLX
protocol version 1.2.
(**) module glx.so successfully loaded from
/usr/X11R6/lib/modules
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscal
ed,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/font
s/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100
dpi"
(--) SVGA: PCI: NVidia Riva Ultra Vanta rev 17,
Memory @ 0xe4000000, 0xe6000000
(--) SVGA: chipset:  RIVA ULTRA TNT2
(--) SVGA: videoram: 32640k
(**) SVGA: Option "dac_8_bit"
(**) SVGA: Using 32 bpp, Depth 24, Color weight:
888
(--) SVGA: Maximum allowed dot-clock: 350.000 MHz
(**) SVGA: Mode "1024x768": mode clock = 115.500
(**) SVGA: Mode "800x600": mode clock =  69.650
(**) SVGA: Mode "640x480": mode clock =  45.800
(**) SVGA: Mode "640x400": mode clock =  31.500
(**) SVGA: Mode "512x384": mode clock =  22.000
(**) SVGA: Mode "480x300": mode clock =  20.950
(**) SVGA: Mode "400x300": mode clock =  18.000
(**) SVGA: Mode "320x240": mode clock =  15.750
(**) SVGA: Mode "320x200": mode clock =  12.590
(--) SVGA: Virtual resolution set to 1024x768
(--) SVGA: RIVA ULTRA TNT2: Using hardware cursor
nvisual=32 (0+32)
(--) SVGA: Using XAA (XFree86 Acceleration
Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: Using 8 128x64 areas for pixmap
caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: Horizontal and vertical lines and
segments
Initializing logs
Sucessfully loaded XF86_SVGA server symbols
Sucessfully loaded nv driver

RIVA GLX Version = 1.2
Creating new client: 8!
Adding client as resource: 570425344!
### Creating new xsmesa context for Riva...
Adding drawable 33554433 to glWindows list:

Fatal server error:
Caught signal 11.  Server aborting


When reporting a problem related to a server
crash, please send
the full server output, not just the last
messages             

xinit:  connection to X server lost.^M
X connection to :0.0 broken (explicit kill or
server shutdown).^M
wmaker warning: got signal 1 (Hangup) -
exiting...               


Geocrawler.com - The Knowledge Archive