[tuxdroid-svn] r646 - in software/gadgets/battery_monitor/trunk: . Battery_monitor_svn Battery_monitor_svn/Strings

[Paul_R <c2m...@c2...>]

Author: Paul_R
Date: 2007-10-29 16:55:44 +0100 (Mon, 29 Oct 2007)
New Revision: 646

Modified:
   software/gadgets/battery_monitor/trunk/Battery_monitor.tgf
   software/gadgets/battery_monitor/trunk/Battery_monitor_svn/Strings/fr_ALL.xml
   software/gadgets/battery_monitor/trunk/Battery_monitor_svn/about.xml
   software/gadgets/battery_monitor/trunk/Battery_monitor_svn/settings.xml
   software/gadgets/battery_monitor/trunk/Battery_monitor_svn/strings.xml
Log:
* Changed some TTS messages


Modified: software/gadgets/battery_monitor/trunk/Battery_monitor.tgf
===================================================================
(Binary files differ)

Modified: software/gadgets/battery_monitor/trunk/Battery_monitor_svn/Strings/fr_ALL.xml
===================================================================
--- software/gadgets/battery_monitor/trunk/Battery_monitor_svn/Strings/fr_ALL.xml	2007-10-29 15:51:15 UTC (rev 645)
+++ software/gadgets/battery_monitor/trunk/Battery_monitor_svn/Strings/fr_ALL.xml	2007-10-29 15:55:44 UTC (rev 646)
@@ -11,7 +11,7 @@
   <widget_lblControl type='str'>Contrôle</widget_lblControl>
   <Increase type='str'>Le niveau de la batterie est passé en dessus du seuil</Increase>
   <full type='str'>Les batteries sont pleines</full>
-  <widget_lblChangeD type='str'>Changement inf.</widget_lblChangeD>
+  <gui_conf_accept_bt type='str'>Valider</gui_conf_accept_bt>
   <lblLowThreshold type='str'>Limite inférieure</lblLowThreshold>
   <help_text type='str'>-- Les évènements :
 Deux grands types d'évènements peuvent avoir lieu, contenant chacun diverses options :
@@ -73,7 +73,7 @@
   <MainBehavior type='str'>Comportement principal</MainBehavior>
   <speaker_name type='str'>Bruno8k</speaker_name>
   <conf_lblSample type='str'>Points</conf_lblSample>
-  <conf_lblType type='str'>Type</conf_lblType>
+  <charging type='str'>En charge</charging>
   <Change type='str'>Le niveau de la batterie a changé</Change>
   <Both type='str'>Le niveau de la batterie a passé le seuil</Both>
   <conf_btnModify type='str'>Modifier</conf_btnModify>
@@ -82,7 +82,7 @@
   <widget_lblIncrease type='str'>Accroissement</widget_lblIncrease>
   <widget_lblRaise type='str'>Augmentation</widget_lblRaise>
   <conf_btnAdd type='str'>Ajouter</conf_btnAdd>
-  <on_battery type='str'>et alimenté par les batteries</on_battery>
+  <on_battery type='str'>et je suis alimenté par les batteries</on_battery>
   <widget_lblDecrease type='str'>Decroissance</widget_lblDecrease>
   <gui_conf_sample_lb type='str'>Nombre de points :</gui_conf_sample_lb>
   <gui_conf_current_bind_lb type='str'>Assignation</gui_conf_current_bind_lb>
@@ -102,18 +102,18 @@
   <gui_conf_remote_set_bt type='str'>Set</gui_conf_remote_set_bt>
   <widget_lblChange type='str'>Changement</widget_lblChange>
   <name_to_read type='str'>Moniteur de batteries</name_to_read>
-  <gui_conf_window_title type='str'>Paramètres</gui_conf_window_title>
+  <conf_lblNotNotified type='str'>Non notifié</conf_lblNotNotified>
   <Drop type='str'>Le niveau de la batterie a chuté</Drop>
   <conf_lblDrop type='str'>Chute</conf_lblDrop>
-  <conf_lblNotNotified type='str'>Non notifié</conf_lblNotNotified>
+  <gui_conf_window_title type='str'>Paramètres</gui_conf_window_title>
   <Raise type='str'>Le niveau de la batterie a augmenté</Raise>
-  <charging type='str'>En charge</charging>
+  <conf_lblType type='str'>Type</conf_lblType>
   <widget_lblSet type='str'>Ajouter a la config.</widget_lblSet>
   <Decrease type='str'>Le niveau de la batterie est passé en dessous du seuil</Decrease>
   <conf_lblValue type='str'>Valeur (V)</conf_lblValue>
   <conf_lblRate type='str'>Rafraichissement</conf_lblRate>
   <widget_lblBehavior type='str'>Activer le script</widget_lblBehavior>
-  <gui_conf_accept_bt type='str'>Valider</gui_conf_accept_bt>
+  <widget_lblChangeD type='str'>Changement inf.</widget_lblChangeD>
   <conf_lblTime type='str'>Temps (sec.)</conf_lblTime>
   <conf_lblControl type='str'>Contrôle</conf_lblControl>
   <conf_lblNotified type='str'>Notifié ?</conf_lblNotified>

Modified: software/gadgets/battery_monitor/trunk/Battery_monitor_svn/about.xml
===================================================================
--- software/gadgets/battery_monitor/trunk/Battery_monitor_svn/about.xml	2007-10-29 15:51:15 UTC (rev 645)
+++ software/gadgets/battery_monitor/trunk/Battery_monitor_svn/about.xml	2007-10-29 15:55:44 UTC (rev 646)
@@ -1,7 +1,7 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <about>
+  <gadget_author type='str'>Paul Rathgeb</gadget_author>
+  <gadget_version type='str'>0.0.1</gadget_version>
   <gadget_name type='str'>battery_monitor</gadget_name>
-  <gadget_author type='str'>Paul Rathgeb</gadget_author>
   <gadget_description type='str'>Battery monitor for tux droid</gadget_description>
-  <gadget_version type='str'>0.0.1</gadget_version>
 </about>

Modified: software/gadgets/battery_monitor/trunk/Battery_monitor_svn/settings.xml
===================================================================
--- software/gadgets/battery_monitor/trunk/Battery_monitor_svn/settings.xml	2007-10-29 15:51:15 UTC (rev 645)
+++ software/gadgets/battery_monitor/trunk/Battery_monitor_svn/settings.xml	2007-10-29 15:55:44 UTC (rev 646)
@@ -1,11 +1,11 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <settings>
   <parameters>
-    <test_tab type='list'>[[1, 0, 0, 0.10000000000000001, 20.0, True, 'None', False, 0]]</test_tab>
+    <Sample type='float'>600.0</Sample>
+    <low_threshold type='float'>4.8</low_threshold>
     <chkMotors type='bool'>True</chkMotors>
-    <low_threshold type='float'>4.8</low_threshold>
     <MainScript type='str'>None</MainScript>
-    <Sample type='float'>600.0</Sample>
+    <test_tab type='list'>[[1, 0, 0, 0.10000000000000001, 20.0, True, 'None', False, 0]]</test_tab>
     <Rate type='float'>1.0</Rate>
     <high_threshold type='float'>6.0</high_threshold>
     <config type='list'>[]</config>

Modified: software/gadgets/battery_monitor/trunk/Battery_monitor_svn/strings.xml
===================================================================
--- software/gadgets/battery_monitor/trunk/Battery_monitor_svn/strings.xml	2007-10-29 15:51:15 UTC (rev 645)
+++ software/gadgets/battery_monitor/trunk/Battery_monitor_svn/strings.xml	2007-10-29 15:55:44 UTC (rev 646)
@@ -1,22 +1,17 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <strings>
   <conf_lblIncrease type='str'>Increase</conf_lblIncrease>
-  <widget_lblChangeD type='str'>Drop and raise</widget_lblChangeD>
   <conf_lblThreshold type='str'>Threshold</conf_lblThreshold>
   <gui_conf_remote_title type='str'>Control</gui_conf_remote_title>
-  <conf_lblTime type='str'>Time (sec.)</conf_lblTime>
   <battery type='str'>On battery</battery>
   <conf_lblRaise type='str'>Raise</conf_lblRaise>
-  <widget_lblTest type='str'>Notifications</widget_lblTest>
   <gui_conf_description_lb type='str'>Description</gui_conf_description_lb>
   <conf_lblEvent type='str'>Event</conf_lblEvent>
   <widget_lblControl type='str'>Control</widget_lblControl>
   <Increase type='str'>The battery level exceeded the threshold</Increase>
-  <conf_btnModify type='str'>Modify</conf_btnModify>
-  <gui_conf_accept_bt type='str'>Accept</gui_conf_accept_bt>
-  <lblLowThreshold type='str'>Lower limit</lblLowThreshold>
-  <gui_conf_remote_set_bt type='str'>Set</gui_conf_remote_set_bt>
-  <lblMotors type='str'>Disable measure when the motors are running</lblMotors>
+  <full type='str'>The level of the batteries is full</full>
+  <widget_lblChangeD type='str'>Drop and raise</widget_lblChangeD>
+  <gui_conf_delay_lb type='str'>Delay (sec)</gui_conf_delay_lb>
   <help_text type='str'>--The events:
 Two main types of events can take place, each containing various options:
 
@@ -52,6 +47,7 @@
 When this window is displayed, the events stored in the settings window are not notified. 
 This window makes it possible to try various configurations and to add them in the settings table.</help_text>
   <end_of_charge type='str'>The load of the battery is finished</end_of_charge>
+  <conf_btnRemove type='str'>Remove</conf_btnRemove>
   <conf_lblChange type='str'>Change</conf_lblChange>
   <conf_lblBoth type='str'>Both</conf_lblBoth>
   <widget_lblBtnApply type='str'>Apply changes</widget_lblBtnApply>
@@ -61,61 +57,65 @@
   <gui_conf_update_title type='str'>Update</gui_conf_update_title>
   <conf_lblChangeU type='str'>Raise and drop</conf_lblChangeU>
   <gui_conf_cancel_bt type='str'>Cancel</gui_conf_cancel_bt>
+  <widget_lblBoth type='str'>Both direction</widget_lblBoth>
+  <gui_conf_rate_lb type='str'>Refresh rate :</gui_conf_rate_lb>
   <absolute_threshold_high type='str'>The batteries are full</absolute_threshold_high>
+  <conf_lblType type='str'>Type</conf_lblType>
   <mainscript type='str'>I've found the light !</mainscript>
-  <gui_conf_delay_lb type='str'>Delay (sec)</gui_conf_delay_lb>
+  <MainBehavior type='str'>Main behavior</MainBehavior>
+  <lblLowThreshold type='str'>Lower limit</lblLowThreshold>
   <plugged type='str'>Plugged</plugged>
+  <ChangeU type='str'>The battery level raised and dropped</ChangeU>
   <conf_btnBehavior type='str'>Clear path</conf_btnBehavior>
-  <charge type='str'>and the batteries are being charged</charge>
+  <charge type='str'>and the batteries are recharging</charge>
   <gui_conf_about_title type='str'>About</gui_conf_about_title>
   <conf_lblChangeD type='str'>Drop and raise</conf_lblChangeD>
   <low type='str'>The level of the batteries is weak</low>
-  <conf_btnAdd type='str'>Add</conf_btnAdd>
-  <conf_lblBehavior type='str'>Behavior script</conf_lblBehavior>
+  <speaker_name type='str'>Ryan8k</speaker_name>
   <conf_lblSample type='str'>Samples</conf_lblSample>
   <charging type='str'>Charging</charging>
   <Change type='str'>The battery level changed</Change>
-  <conf_lblValue type='str'>Value (V)</conf_lblValue>
   <Both type='str'>The battery level reached the threshold</Both>
-  <full type='str'>The level of the batteries is full</full>
+  <conf_btnModify type='str'>Modify</conf_btnModify>
   <widget_lblEvent type='str'>Event</widget_lblEvent>
   <normal type='str'>The level of the batteries is good</normal>
   <widget_lblIncrease type='str'>Increasing</widget_lblIncrease>
   <widget_lblRaise type='str'>Raise</widget_lblRaise>
-  <gui_conf_rate_lb type='str'>Refresh rate :</gui_conf_rate_lb>
-  <on_battery type='str'>and tux is fed by the batteries</on_battery>
+  <conf_btnAdd type='str'>Add</conf_btnAdd>
+  <on_battery type='str'>and I'm powered by the battery</on_battery>
   <widget_lblDecrease type='str'>Decreasing</widget_lblDecrease>
   <gui_conf_sample_lb type='str'>Sample :</gui_conf_sample_lb>
   <gui_conf_current_bind_lb type='str'>Current</gui_conf_current_bind_lb>
   <conf_lblNotifiedBehavior type='str'>Notified</conf_lblNotifiedBehavior>
   <gui_conf_author_lb type='str'>Author</gui_conf_author_lb>
   <widget_lblDrop type='str'>Drop</widget_lblDrop>
-  <conf_lblNotified type='str'>Notified ?</conf_lblNotified>
-  <gui_conf_window_title type='str'>Parameters</gui_conf_window_title>
-  <widget_lblBoth type='str'>Both direction</widget_lblBoth>
+  <ChangeD type='str'>The battery level dropped and raised</ChangeD>
+  <absolute_threshold type='str'>Weak batteries </absolute_threshold>
+  <lblMotors type='str'>Disable measurement when the motors are running</lblMotors>
   <conf_lblDecrease type='str'>Decrease</conf_lblDecrease>
+  <lblHighThreshold type='str'>Upper limit</lblHighThreshold>
   <widget_lblValue type='str'>Value (V)</widget_lblValue>
   <conf_lblDefaultBehavior type='str'>Default behavior</conf_lblDefaultBehavior>
-  <speaker_name type='str'>Ryan8k</speaker_name>
+  <widget_lblDisplayThreshold type='str'>Display threshold on graph</widget_lblDisplayThreshold>
+  <conf_lblBehavior type='str'>Behavior script</conf_lblBehavior>
   <plug type='str'>and the power supply is plugged</plug>
-  <absolute_threshold type='str'>Weak batteries </absolute_threshold>
+  <gui_conf_remote_set_bt type='str'>Set</gui_conf_remote_set_bt>
   <widget_lblChange type='str'>Change</widget_lblChange>
   <name_to_read type='str'>Battery monitor</name_to_read>
-  <lblHighThreshold type='str'>Higher limit</lblHighThreshold>
-  <conf_lblNotNotified type='str'>Not notified</conf_lblNotNotified>
+  <gui_conf_window_title type='str'>Parameters</gui_conf_window_title>
   <Drop type='str'>The battery level dropped</Drop>
   <conf_lblDrop type='str'>Drop</conf_lblDrop>
-  <ChangeD type='str'>The battery level dropped and raised</ChangeD>
+  <conf_lblNotNotified type='str'>Not notified</conf_lblNotNotified>
   <Raise type='str'>The battery level raised</Raise>
-  <conf_lblType type='str'>Type</conf_lblType>
+  <conf_lblNotified type='str'>Notified ?</conf_lblNotified>
   <widget_lblSet type='str'>Add to config</widget_lblSet>
   <Decrease type='str'>The battery level passed below the threshold</Decrease>
-  <widget_lblDisplayThreshold type='str'>Display threshold on graph</widget_lblDisplayThreshold>
+  <conf_lblValue type='str'>Value (V)</conf_lblValue>
   <conf_lblRate type='str'>Refresh rate</conf_lblRate>
   <widget_lblBehavior type='str'>Enable behavior script</widget_lblBehavior>
-  <MainBehavior type='str'>Main behavior</MainBehavior>
-  <ChangeU type='str'>The battery level raised and dropped</ChangeU>
+  <gui_conf_accept_bt type='str'>Accept</gui_conf_accept_bt>
+  <conf_lblTime type='str'>Time (sec.)</conf_lblTime>
   <conf_lblControl type='str'>Control</conf_lblControl>
-  <conf_btnRemove type='str'>Remove</conf_btnRemove>
+  <widget_lblTest type='str'>Notifications</widget_lblTest>
   <widget_lblThreshold type='str'>Threshold</widget_lblThreshold>
 </strings>