[tuxdroid-svn] r641 - in software/gadgets/battery_monitor/trunk: . Battery_monitor_svn Battery_moni
Status: Beta
Brought to you by:
ks156
From: Paul_R <c2m...@c2...> - 2007-10-24 10:19:49
|
Author: Paul_R Date: 2007-10-24 12:19:49 +0200 (Wed, 24 Oct 2007) New Revision: 641 Modified: software/gadgets/battery_monitor/trunk/Battery_monitor.tgf software/gadgets/battery_monitor/trunk/Battery_monitor_svn/Strings/fr_ALL.xml software/gadgets/battery_monitor/trunk/Battery_monitor_svn/about.xml software/gadgets/battery_monitor/trunk/Battery_monitor_svn/settings.xml software/gadgets/battery_monitor/trunk/Battery_monitor_svn/strings.xml Log: * Little change in a label Modified: software/gadgets/battery_monitor/trunk/Battery_monitor.tgf =================================================================== (Binary files differ) Modified: software/gadgets/battery_monitor/trunk/Battery_monitor_svn/Strings/fr_ALL.xml =================================================================== --- software/gadgets/battery_monitor/trunk/Battery_monitor_svn/Strings/fr_ALL.xml 2007-10-24 10:07:29 UTC (rev 640) +++ software/gadgets/battery_monitor/trunk/Battery_monitor_svn/Strings/fr_ALL.xml 2007-10-24 10:19:49 UTC (rev 641) @@ -11,7 +11,7 @@ <widget_lblControl type='str'>Contrôle</widget_lblControl> <Increase type='str'>Le niveau de la batterie est passé en dessus du seuil</Increase> <full type='str'>Les batteries sont pleines</full> - <widget_lblChangeD type='str'>Changement inf.</widget_lblChangeD> + <gui_conf_accept_bt type='str'>Valider</gui_conf_accept_bt> <lblLowThreshold type='str'>Limite inférieure</lblLowThreshold> <help_text type='str'>-- Les évènements : Deux grands types d'évènements peuvent avoir lieu, contenant chacun diverses options : @@ -58,7 +58,7 @@ <conf_lblChangeU type='str'>Augmente et chute</conf_lblChangeU> <gui_conf_cancel_bt type='str'>Annuler</gui_conf_cancel_bt> <widget_lblBoth type='str'>Deux directions</widget_lblBoth> - <gui_conf_rate_lb type='str'>Taux de rafraichissement :</gui_conf_rate_lb> + <gui_conf_rate_lb type='str'>Rafraichissement :</gui_conf_rate_lb> <absolute_threshold_high type='str'>Batteries pleines</absolute_threshold_high> <mainscript type='str'>J'ai trouvé la lumière !</mainscript> <conf_btnRemove type='str'>Enlever</conf_btnRemove> @@ -73,7 +73,7 @@ <MainBehavior type='str'>Comportement principal</MainBehavior> <speaker_name type='str'>Bruno8k</speaker_name> <conf_lblSample type='str'>Points</conf_lblSample> - <conf_lblType type='str'>Type</conf_lblType> + <charging type='str'>En charge</charging> <Change type='str'>Le niveau de la batterie a changé</Change> <Both type='str'>Le niveau de la batterie a passé le seuil</Both> <conf_btnModify type='str'>Modifier</conf_btnModify> @@ -82,7 +82,7 @@ <widget_lblIncrease type='str'>Accroissement</widget_lblIncrease> <widget_lblRaise type='str'>Augmentation</widget_lblRaise> <conf_btnAdd type='str'>Ajouter</conf_btnAdd> - <on_battery type='str'>et tux est alimenté par les batteries</on_battery> + <on_battery type='str'>et alimenté par les batteries</on_battery> <widget_lblDecrease type='str'>Decroissance</widget_lblDecrease> <gui_conf_sample_lb type='str'>Nombre de points :</gui_conf_sample_lb> <gui_conf_current_bind_lb type='str'>Assignation</gui_conf_current_bind_lb> @@ -102,18 +102,18 @@ <gui_conf_remote_set_bt type='str'>Set</gui_conf_remote_set_bt> <widget_lblChange type='str'>Changement</widget_lblChange> <name_to_read type='str'>Moniteur de batteries</name_to_read> - <gui_conf_window_title type='str'>Paramètres</gui_conf_window_title> + <conf_lblNotNotified type='str'>Non notifié</conf_lblNotNotified> <Drop type='str'>Le niveau de la batterie a chuté</Drop> <conf_lblDrop type='str'>Chute</conf_lblDrop> - <conf_lblNotNotified type='str'>Non notifié</conf_lblNotNotified> + <gui_conf_window_title type='str'>Paramètres</gui_conf_window_title> <Raise type='str'>Le niveau de la batterie a augmenté</Raise> - <charging type='str'>En charge</charging> + <conf_lblType type='str'>Type</conf_lblType> <widget_lblSet type='str'>Ajouter a la config.</widget_lblSet> <Decrease type='str'>Le niveau de la batterie est passé en dessous du seuil</Decrease> <conf_lblValue type='str'>Valeur (V)</conf_lblValue> - <conf_lblRate type='str'>Taux de rafraichissement</conf_lblRate> + <conf_lblRate type='str'>Rafraichissement</conf_lblRate> <widget_lblBehavior type='str'>Activer le script</widget_lblBehavior> - <gui_conf_accept_bt type='str'>Valider</gui_conf_accept_bt> + <widget_lblChangeD type='str'>Changement inf.</widget_lblChangeD> <conf_lblTime type='str'>Temps (sec.)</conf_lblTime> <conf_lblControl type='str'>Contrôle</conf_lblControl> <conf_lblNotified type='str'>Notifié ?</conf_lblNotified> Modified: software/gadgets/battery_monitor/trunk/Battery_monitor_svn/about.xml =================================================================== --- software/gadgets/battery_monitor/trunk/Battery_monitor_svn/about.xml 2007-10-24 10:07:29 UTC (rev 640) +++ software/gadgets/battery_monitor/trunk/Battery_monitor_svn/about.xml 2007-10-24 10:19:49 UTC (rev 641) @@ -1,7 +1,7 @@ <?xml version='1.0' encoding='UTF-8'?> <about> + <gadget_author type='str'>Paul Rathgeb</gadget_author> + <gadget_version type='str'>0.0.1</gadget_version> <gadget_description type='str'>Battery monitor for tux droid</gadget_description> - <gadget_author type='str'>Paul Rathgeb</gadget_author> <gadget_name type='str'>battery_monitor</gadget_name> - <gadget_version type='str'>0.0.1</gadget_version> </about> Modified: software/gadgets/battery_monitor/trunk/Battery_monitor_svn/settings.xml =================================================================== --- software/gadgets/battery_monitor/trunk/Battery_monitor_svn/settings.xml 2007-10-24 10:07:29 UTC (rev 640) +++ software/gadgets/battery_monitor/trunk/Battery_monitor_svn/settings.xml 2007-10-24 10:19:49 UTC (rev 641) @@ -1,11 +1,11 @@ <?xml version='1.0' encoding='UTF-8'?> <settings> <parameters> - <test_tab type='list'>[[1, 0, 0, 0.10000000000000001, 20.0, True, 'None', False, 0]]</test_tab> + <Sample type='float'>600.0</Sample> + <low_threshold type='float'>4.8</low_threshold> <chkMotors type='bool'>True</chkMotors> - <low_threshold type='float'>4.8</low_threshold> <MainScript type='str'>None</MainScript> - <Sample type='float'>600.0</Sample> + <test_tab type='list'>[[1, 0, 0, 0.10000000000000001, 20.0, True, 'None', False, 0]]</test_tab> <Rate type='float'>1.0</Rate> <high_threshold type='float'>6.0</high_threshold> <config type='list'>[]</config> Modified: software/gadgets/battery_monitor/trunk/Battery_monitor_svn/strings.xml =================================================================== --- software/gadgets/battery_monitor/trunk/Battery_monitor_svn/strings.xml 2007-10-24 10:07:29 UTC (rev 640) +++ software/gadgets/battery_monitor/trunk/Battery_monitor_svn/strings.xml 2007-10-24 10:19:49 UTC (rev 641) @@ -3,20 +3,15 @@ <conf_lblIncrease type='str'>Increase</conf_lblIncrease> <conf_lblThreshold type='str'>Threshold</conf_lblThreshold> <gui_conf_remote_title type='str'>Control</gui_conf_remote_title> - <conf_lblTime type='str'>Time (sec.)</conf_lblTime> <battery type='str'>On battery</battery> - <gui_conf_accept_bt type='str'>Accept</gui_conf_accept_bt> <conf_lblRaise type='str'>Raise</conf_lblRaise> - <widget_lblTest type='str'>Notifications</widget_lblTest> <gui_conf_description_lb type='str'>Description</gui_conf_description_lb> <conf_lblEvent type='str'>Event</conf_lblEvent> <widget_lblControl type='str'>Control</widget_lblControl> <Increase type='str'>The battery level exceeded the threshold</Increase> - <conf_btnModify type='str'>Modify</conf_btnModify> - <widget_lblChangeD type='str'>Drop and raise</widget_lblChangeD> - <lblLowThreshold type='str'>Lower limit</lblLowThreshold> - <gui_conf_remote_set_bt type='str'>Set</gui_conf_remote_set_bt> - <lblMotors type='str'>Disable measure when the motors are running</lblMotors> + <full type='str'>The level of the batteries is full</full> + <gui_conf_accept_bt type='str'>Accept</gui_conf_accept_bt> + <gui_conf_delay_lb type='str'>Delay (sec)</gui_conf_delay_lb> <help_text type='str'>-- The events: Two main types of events can take place, containing each one various options: @@ -53,38 +48,41 @@ When this window is showed, the events recorded in the settings window are not notified. This window makes it possible to try various configurations and to add them in the settings table.</help_text> <end_of_charge type='str'>The load of the battery is finished</end_of_charge> + <conf_btnRemove type='str'>Remove</conf_btnRemove> <conf_lblChange type='str'>Change</conf_lblChange> <conf_lblBoth type='str'>Both</conf_lblBoth> <widget_lblBtnApply type='str'>Apply changes</widget_lblBtnApply> <widget_lblChangeU type='str'>Raise and drop</widget_lblChangeU> <widget_lblNotified type='str'>Notified</widget_lblNotified> - <conf_lblNotNotified type='str'>Not notified</conf_lblNotNotified> <gui_conf_version_lb type='str'>Version</gui_conf_version_lb> <gui_conf_update_title type='str'>Update</gui_conf_update_title> <conf_lblChangeU type='str'>Raise and drop</conf_lblChangeU> <gui_conf_cancel_bt type='str'>Cancel</gui_conf_cancel_bt> + <widget_lblBoth type='str'>Both direction</widget_lblBoth> + <gui_conf_rate_lb type='str'>Refresh rate :</gui_conf_rate_lb> <absolute_threshold_high type='str'>The batteries are full</absolute_threshold_high> <mainscript type='str'>I've found the light !</mainscript> - <gui_conf_delay_lb type='str'>Delay (sec)</gui_conf_delay_lb> + <MainBehavior type='str'>Main behavior</MainBehavior> + <lblLowThreshold type='str'>Lower limit</lblLowThreshold> <plugged type='str'>Plugged</plugged> + <ChangeU type='str'>The battery level raised and dropped</ChangeU> <conf_btnBehavior type='str'>Clear path</conf_btnBehavior> <charge type='str'>and the batteries are being charged</charge> <gui_conf_about_title type='str'>About</gui_conf_about_title> <conf_lblChangeD type='str'>Drop and raise</conf_lblChangeD> <low type='str'>The level of the batteries is weak</low> - <conf_btnAdd type='str'>Add</conf_btnAdd> - <conf_lblBehavior type='str'>Behavior script</conf_lblBehavior> + <charging type='str'>Charging</charging> + <speaker_name type='str'>Ryan8k</speaker_name> <conf_lblSample type='str'>Samples</conf_lblSample> <conf_lblType type='str'>Type</conf_lblType> <Change type='str'>The battery level changed</Change> - <conf_lblValue type='str'>Value (V)</conf_lblValue> <Both type='str'>The battery level reached the threshold</Both> - <full type='str'>The level of the batteries is full</full> + <conf_btnModify type='str'>Modify</conf_btnModify> <widget_lblEvent type='str'>Event</widget_lblEvent> <normal type='str'>The level of the batteries is good</normal> <widget_lblIncrease type='str'>Increasing</widget_lblIncrease> <widget_lblRaise type='str'>Raise</widget_lblRaise> - <gui_conf_rate_lb type='str'>Refresh rate :</gui_conf_rate_lb> + <conf_btnAdd type='str'>Add</conf_btnAdd> <on_battery type='str'>and tux is fed by the batteries</on_battery> <widget_lblDecrease type='str'>Decreasing</widget_lblDecrease> <gui_conf_sample_lb type='str'>Sample :</gui_conf_sample_lb> @@ -92,31 +90,33 @@ <conf_lblNotifiedBehavior type='str'>Notified</conf_lblNotifiedBehavior> <gui_conf_author_lb type='str'>Author</gui_conf_author_lb> <widget_lblDrop type='str'>Drop</widget_lblDrop> - <conf_lblNotified type='str'>Notified ?</conf_lblNotified> - <widget_lblBoth type='str'>Both direction</widget_lblBoth> + <ChangeD type='str'>The battery level dropped and raised</ChangeD> + <absolute_threshold type='str'>Weak batteries </absolute_threshold> + <lblMotors type='str'>Disable measure when the motors are running</lblMotors> <conf_lblDecrease type='str'>Decrease</conf_lblDecrease> + <lblHighThreshold type='str'>Higher limit</lblHighThreshold> <widget_lblValue type='str'>Value (V)</widget_lblValue> <conf_lblDefaultBehavior type='str'>Default behavior</conf_lblDefaultBehavior> - <speaker_name type='str'>Ryan8k</speaker_name> + <widget_lblDisplayThreshold type='str'>Display threshold on graph</widget_lblDisplayThreshold> + <conf_lblBehavior type='str'>Behavior script</conf_lblBehavior> <plug type='str'>and the power supply is plugged</plug> - <absolute_threshold type='str'>Weak batteries </absolute_threshold> + <gui_conf_remote_set_bt type='str'>Set</gui_conf_remote_set_bt> <widget_lblChange type='str'>Change</widget_lblChange> <name_to_read type='str'>Battery monitor</name_to_read> - <lblHighThreshold type='str'>Higher limit</lblHighThreshold> - <gui_conf_window_title type='str'>Parameters</gui_conf_window_title> + <conf_lblNotNotified type='str'>Not notified</conf_lblNotNotified> <Drop type='str'>The battery level dropped</Drop> <conf_lblDrop type='str'>Drop</conf_lblDrop> - <ChangeD type='str'>The battery level dropped and raised</ChangeD> + <gui_conf_window_title type='str'>Parameters</gui_conf_window_title> <Raise type='str'>The battery level raised</Raise> - <charging type='str'>Charging</charging> + <conf_lblNotified type='str'>Notified ?</conf_lblNotified> <widget_lblSet type='str'>Add to config</widget_lblSet> <Decrease type='str'>The battery level passed below the threshold</Decrease> - <widget_lblDisplayThreshold type='str'>Display threshold on graph</widget_lblDisplayThreshold> + <conf_lblValue type='str'>Value (V)</conf_lblValue> <conf_lblRate type='str'>Refresh rate</conf_lblRate> <widget_lblBehavior type='str'>Enable behavior script</widget_lblBehavior> - <MainBehavior type='str'>Main behavior</MainBehavior> - <ChangeU type='str'>The battery level raised and dropped</ChangeU> + <widget_lblChangeD type='str'>Drop and raise</widget_lblChangeD> + <conf_lblTime type='str'>Time (sec.)</conf_lblTime> <conf_lblControl type='str'>Control</conf_lblControl> - <conf_btnRemove type='str'>Remove</conf_btnRemove> + <widget_lblTest type='str'>Notifications</widget_lblTest> <widget_lblThreshold type='str'>Threshold</widget_lblThreshold> </strings> |