Recent changes to createoutline

createoutline modified by Domhnall101

Domhnall101 — Wed, 14 Oct 2015 19:17:22 -0000

--- v11
+++ v12
@@ -11,6 +11,15 @@
 6.  Repeat step 3 until you have all the Segments you want for the Outline you are making.
 7.  Click the *Save and Close* button.

+###Add Segment to Outline
+1 .  The *Add Segment* popup allows you to select the Segment from each Material that you wish to collate or otherwise select. Rember Every segment needs to be in an Outline but only Outlines intended for collation should have contain more than one Segment.
+    1. Select the first Material from the Include *Segment from Material* list. 
+    2. If selection has any existing Segment a box will appearunder the *Segments* header listing those Segments by their Label. 
+4. Click the Segment desired from the Segment list  to add to the Outline.
+5.  Repeat step 3 until you have all the Segments you want for the Outline you are making.
+6.  Click the *Save and Close* button.
+
+
 A single Segment is needed for each part of a material you want to use in a publication. eg. 'Chapter 1 commentary'. 
 If you are creating an Outline for collation you will need to create an Segment of the desired part of each witness Material (such as *Chapter 1 siglum a*) To create a collatable Outine you must create  and add all the outlines you wish to collate against each other. So you would create *Chapter 1, siglum a,b,m,f,z for collation* as an Outine and then add Chapter 1 siglum a, Chapter 1 siglum b, Chapter 1 siglum m, Chapter 1 siglum f and, Chapter 1 siglum z to it to create the collatable Outine.

createoutline modified by Domhnall101

Domhnall101 — Wed, 14 Oct 2015 19:14:31 -0000

--- v10
+++ v11
@@ -4,12 +4,12 @@
 1. Click the *Create Outline* button
 2. Enter a title for your Outline under Label. This will be the label for this content when you are organizing your publication so a recognizable label is advisable eg. *Chapter 1, siglum a,b,m,f,z for collation*.
 3.  Click the *Add Segment* button.
-+  The *Add Segment* popup allows you to select the Segment from each Material that you wish to collate or otherwise select. Rember Every segment needs to be in an Outline but only Outlines intended for collation should have contain more than one Segment.
+4.  The *Add Segment* popup allows you to select the Segment from each Material that you wish to collate or otherwise select. Rember Every segment needs to be in an Outline but only Outlines intended for collation should have contain more than one Segment.
     1. Select the first Material from the Include *Segment from Material* list. 
-    +  If selection has any existing Segment a box will appearunder the *Segments* header listing those Segments by their Label. 
-    +  Click the Segment from the Segment list  to add to the Outline.
-+  Repeat step 3 until you have all the Segments you want for the Outline you are making.
-+  Click the *Save and Close* button.
+    2. If selection has any existing Segment a box will appearunder the *Segments* header listing those Segments by their Label. 
+5. Click the Segment desired from the Segment list  to add to the Outline.
+6.  Repeat step 3 until you have all the Segments you want for the Outline you are making.
+7.  Click the *Save and Close* button.

 A single Segment is needed for each part of a material you want to use in a publication. eg. 'Chapter 1 commentary'. 
 If you are creating an Outline for collation you will need to create an Segment of the desired part of each witness Material (such as *Chapter 1 siglum a*) To create a collatable Outine you must create  and add all the outlines you wish to collate against each other. So you would create *Chapter 1, siglum a,b,m,f,z for collation* as an Outine and then add Chapter 1 siglum a, Chapter 1 siglum b, Chapter 1 siglum m, Chapter 1 siglum f and, Chapter 1 siglum z to it to create the collatable Outine.

createoutline modified by Domhnall101

Domhnall101 — Wed, 14 Oct 2015 17:33:43 -0000

--- v9
+++ v10
@@ -1,4 +1,4 @@
-#Creating Outlines
+###Creating Outlines
 Outlines are created under the [Draft Tab](drafttab). 
 To create Outlines go to the Drafts Tab. To create Outlines you must first create [Segments](#segment) under the [Materials Tab](MaterialsTab). 
 1. Click the *Create Outline* button

createoutline modified by Domhnall101

Domhnall101 — Tue, 13 Oct 2015 15:45:08 -0000

--- v8
+++ v9
@@ -1,18 +1,18 @@
 #Creating Outlines
 Outlines are created under the [Draft Tab](drafttab). 
-
- 
- 1. Enter a title for your Outline under Label. This will be the label for this content when you are organizing your publication so a recognizable label is advisable eg. *Chapter 1, siglum a,b,m,f,z for collation*.
-2. Click the *Add Bounds* button.
-+  The *Add Bounds* popup allows you to select the Outline from each witness or material that you wish to collate or otherwise select.
-    1. Select the first document/witness/material from the Include Material list. 
-    +  If selection has any existing a box will appear listing those sections by their Label. 
-    +  Select the Section from the list and click the *add* button.
-+  Repeat step 3 until you have all the outline you want for the Section you are making.
+To create Outlines go to the Drafts Tab. To create Outlines you must first create [Segments](#segment) under the [Materials Tab](MaterialsTab). 
+1. Click the *Create Outline* button
+2. Enter a title for your Outline under Label. This will be the label for this content when you are organizing your publication so a recognizable label is advisable eg. *Chapter 1, siglum a,b,m,f,z for collation*.
+3.  Click the *Add Segment* button.
++  The *Add Segment* popup allows you to select the Segment from each Material that you wish to collate or otherwise select. Rember Every segment needs to be in an Outline but only Outlines intended for collation should have contain more than one Segment.
+    1. Select the first Material from the Include *Segment from Material* list. 
+    +  If selection has any existing Segment a box will appearunder the *Segments* header listing those Segments by their Label. 
+    +  Click the Segment from the Segment list  to add to the Outline.
++  Repeat step 3 until you have all the Segments you want for the Outline you are making.
 +  Click the *Save and Close* button.

-A single Outline is needed for each part of a material you want to use in a publication. eg. 'Chapter 1 commentary'. 
-If you are creating an Outline for collation you will need to create an out Outline of the desired part of each witness (such as *Chapter 1 siglum a*) To create a collatable Outine you must Create another outline and add all the outlines you wish to collate against each other. So you would create *Chapter 1, siglum a,b,m,f,z for collation* as an Outine and then add Chapter 1 siglum a, Chapter 1 siglum b, Chapter 1 siglum m, Chapter 1 siglum f and, Chapter 1 siglum z to it to create the collatable Outine.
+A single Segment is needed for each part of a material you want to use in a publication. eg. 'Chapter 1 commentary'. 
+If you are creating an Outline for collation you will need to create an Segment of the desired part of each witness Material (such as *Chapter 1 siglum a*) To create a collatable Outine you must create  and add all the outlines you wish to collate against each other. So you would create *Chapter 1, siglum a,b,m,f,z for collation* as an Outine and then add Chapter 1 siglum a, Chapter 1 siglum b, Chapter 1 siglum m, Chapter 1 siglum f and, Chapter 1 siglum z to it to create the collatable Outine.

 Note: If there are no Outlines in the selected entry in the Include Material list, you can add Outlines by selecting the entry you want and clicking the Annotate Structure list which will bring you to the Outline popup in the Structure Tab under Materials Tab.

createoutline modified by Domhnall101

Domhnall101 — Thu, 08 Oct 2015 17:00:09 -0000

createOutline modified by Domhnall101

Domhnall101 — Thu, 08 Oct 2015 16:59:42 -0000

createoultine modified by Domhnall101

Domhnall101 — Thu, 08 Oct 2015 16:48:45 -0000

createsection modified by Domhnall101

Domhnall101 — Thu, 08 Oct 2015 16:44:51 -0000

--- v4
+++ v5
@@ -1,13 +1,18 @@
-#Creating Sections
-Outlines are created  under the [Draft Tab](drafttab). 
+#Creating Outlines
+Outlines are created under the [Draft Tab](drafttab).

-1. Enter a title for your Section under Label. This will be the label for this content when you are organizing your publication so a recognizable label is advisable eg. *Chapter 1 collated*.
+ 
+ 1. Enter a title for your Outline under Label. This will be the label for this content when you are organizing your publication so a recognizable label is advisable eg. *Chapter 1, siglum a,b,m,f,z for collation*.
 2. Click the *Add Bounds* button.
-+  The *Add Bounds* popup allows you to select the Sections from each witness or material that you wish to collate.
-    1. Select the first document/witness from the Include Material list. 
-    +  If selection has any Sections a box will appear listing those sections by their Label. 
++  The *Add Bounds* popup allows you to select the Outline from each witness or material that you wish to collate or otherwise select.
+    1. Select the first document/witness/material from the Include Material list. 
+    +  If selection has any existing a box will appear listing those sections by their Label. 
     +  Select the Section from the list and click the *add* button.
 +  Repeat step 3 until you have all the outline you want for the Section you are making.
 +  Click the *Save and Close* button.

+A single Outline is needed for each part of a material you want to use in a publication. eg. 'Chapter 1 commentary'. 
+If you are creating an Outline for collation you will need to create an out Outline of the desired part of each witness (such as *Chapter 1 siglum a*) To create a collatable Outine you must Create another outline and add all the outlines you wish to collate against each other. So you would create *Chapter 1, siglum a,b,m,f,z for collation* as an Outine and then add Chapter 1 siglum a, Chapter 1 siglum b, Chapter 1 siglum m, Chapter 1 siglum f and, Chapter 1 siglum z to it to create the collatable Outine.
+
+
 Note: If there are no Outlines in the selected entry in the Include Material list, you can add Outlines by selecting the entry you want and clicking the Annotate Structure list which will bring you to the Outline popup in the Structure Tab under Materials Tab.

createsection modified by Domhnall101

Domhnall101 — Tue, 06 Oct 2015 21:35:58 -0000

createsection modified by Domhnall101

Domhnall101 — Tue, 06 Oct 2015 20:55:11 -0000

--- v2
+++ v3
@@ -1,5 +1,5 @@
 #Creating Sections
-Outlines are created  under the [Draft Tab](draft). 
+Outlines are created  under the [Draft Tab](drafttab).

 1. Enter a title for your Section under Label. This will be the label for this content when you are organizing your publication so a recognizable label is advisable eg. *Chapter 1 collated*.
 2. Click the *Add Bounds* button.