|
From: <sg...@us...> - 2007-10-28 03:41:26
|
Revision: 105
http://toc.svn.sourceforge.net/toc/?rev=105&view=rev
Author: sgbeal
Date: 2007-10-27 20:41:29 -0700 (Sat, 27 Oct 2007)
Log Message:
-----------
re-ordered flags for .BIN rules to fix link with static libs
Modified Paths:
--------------
make-book/trunk/code/ShakeNMake/shake-n-make.make
Modified: make-book/trunk/code/ShakeNMake/shake-n-make.make
===================================================================
--- make-book/trunk/code/ShakeNMake/shake-n-make.make 2007-10-21 01:22:05 UTC (rev 104)
+++ make-book/trunk/code/ShakeNMake/shake-n-make.make 2007-10-28 03:41:29 UTC (rev 105)
@@ -450,8 +450,8 @@
$$(CFLAGS) $$($(1).BIN.CFLAGS) \
$$(CXXFLAGS) $$($(1).BIN.CXXFLAGS) \
$$(CPPFLAGS) $$($(1).BIN.CPPFLAGS) \
- $$(LDFLAGS) $$($(1).BIN.LDFLAGS) \
- $$($(1).BIN.OBJECTS) $$($(1).BIN.SOURCES)
+ $$($(1).BIN.OBJECTS) $$($(1).BIN.SOURCES) \
+ $$(LDFLAGS) $$($(1).BIN.LDFLAGS)
# note about 'set -x': i do this because it normalizes backslashed
# newline, extra spaces, and other oddities of formatting.
endef
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <sg...@us...> - 2007-10-28 06:47:27
|
Revision: 106
http://toc.svn.sourceforge.net/toc/?rev=106&view=rev
Author: sgbeal
Date: 2007-10-27 23:47:32 -0700 (Sat, 27 Oct 2007)
Log Message:
-----------
corrected args ordering for .DLL targets to avoid undefined symbols
Modified Paths:
--------------
make-book/trunk/code/ShakeNMake/shake-n-make.make
Modified: make-book/trunk/code/ShakeNMake/shake-n-make.make
===================================================================
--- make-book/trunk/code/ShakeNMake/shake-n-make.make 2007-10-28 03:41:29 UTC (rev 105)
+++ make-book/trunk/code/ShakeNMake/shake-n-make.make 2007-10-28 06:47:32 UTC (rev 106)
@@ -411,6 +411,12 @@
$(INCLUDES) $($(*).OBJ.INCLUDES) \
$(CPPFLAGS) $($(*).OBJ.CPPFLAGS) \
-c -o $@ $<
+%.o: %.cxx
+ @$(call ShakeNMake.CALL.SETX,"CXX [$@] ..."); \
+ $(CXX) $(CXXFLAGS) $($(*).OBJ.CXXFLAGS) \
+ $(INCLUDES) $($(*).OBJ.INCLUDES) \
+ $(CPPFLAGS) $($(*).OBJ.CPPFLAGS) \
+ -c -o $@ $<
# end %.o: %.cpp rules
########################################################################
@@ -484,8 +490,9 @@
@test x = "x$$($(1).DLL.OBJECTS)$$($(1).DLL.SOURCES)" && { \
echo "$(1).DLL.OBJECTS and/or $(1).DLL.SOURCES are/is undefined!"; exit 1; }; \
$(call ShakeNMake.CALL.SETX,"CXX [$$@] ..."); \
- $$(CXX) -o $$@ -shared -export-dynamic $$(LDFLAGS) \
- $$($(1).DLL.LDFLAGS) $$($(1).DLL.OBJECTS) $$($(1).DLL.SOURCES) \
+ $$(CXX) -o $$@ -shared $$(LDFLAGS) \
+ $$($(1).DLL.OBJECTS) $$($(1).DLL.SOURCES) \
+ $$($(1).DLL.LDFLAGS) \
$$($(1).DLL.CPPFLAGS)
endef
########################################################################
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <sg...@us...> - 2007-11-08 22:30:43
|
Revision: 107
http://toc.svn.sourceforge.net/toc/?rev=107&view=rev
Author: sgbeal
Date: 2007-11-08 14:30:45 -0800 (Thu, 08 Nov 2007)
Log Message:
-----------
fixed exit code when make dist failed
Modified Paths:
--------------
make-book/trunk/code/ShakeNMake/shake-n-make.make
Modified: make-book/trunk/code/ShakeNMake/shake-n-make.make
===================================================================
--- make-book/trunk/code/ShakeNMake/shake-n-make.make 2007-10-28 06:47:32 UTC (rev 106)
+++ make-book/trunk/code/ShakeNMake/shake-n-make.make 2007-11-08 22:30:45 UTC (rev 107)
@@ -298,7 +298,7 @@
endif
dist:
@$(MAKE) --no-print-directory dist-target-implementation; err=$$?; \
- $(MAKE) --no-print-directory dist-cleanup; echo $$err
+ $(MAKE) --no-print-directory dist-cleanup; exit $$err
clean: dist-cleanup
endif # if $(ShakeNMake.BINS.TAR)
# end dist
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <sg...@us...> - 2007-11-10 04:06:48
|
Revision: 108
http://toc.svn.sourceforge.net/toc/?rev=108&view=rev
Author: sgbeal
Date: 2007-11-09 20:06:52 -0800 (Fri, 09 Nov 2007)
Log Message:
-----------
corrected missing PACKAGE.CLEAN_FILES from the cleanup rules.
Modified Paths:
--------------
make-book/trunk/code/ShakeNMake/shake-n-make.make
Modified: make-book/trunk/code/ShakeNMake/shake-n-make.make
===================================================================
--- make-book/trunk/code/ShakeNMake/shake-n-make.make 2007-11-08 22:30:45 UTC (rev 107)
+++ make-book/trunk/code/ShakeNMake/shake-n-make.make 2007-11-10 04:06:52 UTC (rev 108)
@@ -527,12 +527,12 @@
CLEAN_FILES += *.o
DISTCLEAN_FILES += *~
clean: ShakeNMake.FORCE
- @fl="$(sort $(wildcard $(CLEAN_FILES)))"; \
+ @fl="$(sort $(wildcard $(CLEAN_FILES) $(PACKAGE.CLEAN_FILES)))"; \
test x = "x$$fl" && { echo "Nothing to clean!"; exit 0; }; \
$(call ShakeNMake.CALL.SETX,"Cleaning up ..."); \
$(ShakeNMake.BINS.RM) -fr $$fl
distclean: ShakeNMake.FORCE
- @fl="$(sort $(wildcard $(CLEAN_FILES) $(DISTCLEAN_FILES)))"; \
+ @fl="$(sort $(wildcard $(CLEAN_FILES) $(DISTCLEAN_FILES) $(PACKAGE.CLEAN_FILES) $(PACKAGE.DISTCLEAN_FILES)))"; \
test x = "x$$fl" && { echo "Nothing to clean!"; exit 0; }; \
$(call ShakeNMake.CALL.SETX,"Cleaning up ..."); \
$(ShakeNMake.BINS.RM) -fr $$fl
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <sg...@us...> - 2007-11-10 04:29:38
|
Revision: 109
http://toc.svn.sourceforge.net/toc/?rev=109&view=rev
Author: sgbeal
Date: 2007-11-09 20:29:42 -0800 (Fri, 09 Nov 2007)
Log Message:
-----------
added visual queue when Doxyfile is (re)created
Modified Paths:
--------------
make-book/trunk/code/ShakeNMake/shake-n-make.make
Modified: make-book/trunk/code/ShakeNMake/shake-n-make.make
===================================================================
--- make-book/trunk/code/ShakeNMake/shake-n-make.make 2007-11-10 04:06:52 UTC (rev 108)
+++ make-book/trunk/code/ShakeNMake/shake-n-make.make 2007-11-10 04:29:42 UTC (rev 109)
@@ -618,6 +618,7 @@
-e 's,@PERL@,$(ShakeNMake.BINS.PERL),' \
-e 's,@USE_DOT@,$(ShakeNMake.DOXYGEN.USE_DOT),' \
< $(ShakeNMake.DOXYGEN.DOXYFILE_TEMPLATE) > $@
+ @echo "Created $@"
doxygen-clean:
@test -d $(ShakeNMake.DOXYGEN.OUTPUT_DIR) && rm -fr $(ShakeNMake.DOXYGEN.OUTPUT_DIR); \
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <sg...@us...> - 2008-01-04 18:47:24
|
Revision: 110
http://toc.svn.sourceforge.net/toc/?rev=110&view=rev
Author: sgbeal
Date: 2008-01-04 10:47:20 -0800 (Fri, 04 Jan 2008)
Log Message:
-----------
typo corrections
Modified Paths:
--------------
make-book/trunk/code/ShakeNMake/shake-n-make.make
Modified: make-book/trunk/code/ShakeNMake/shake-n-make.make
===================================================================
--- make-book/trunk/code/ShakeNMake/shake-n-make.make 2007-11-10 04:29:42 UTC (rev 109)
+++ make-book/trunk/code/ShakeNMake/shake-n-make.make 2008-01-04 18:47:20 UTC (rev 110)
@@ -11,7 +11,7 @@
# in higher-level makefiles and include this one from there.
#
# The shell code in this makefile assumes GNU Make, GNU Bash and GNU
-# versions several other common system tools, like mkdir, tar, sed,
+# versions of several other common system tools, like mkdir, tar, sed,
# etc.
#
########################################################################
@@ -49,7 +49,8 @@
# include shake-n-make.mk
#
# Using spaces or special shell characters in .NAME and .VERSION may
-# cause problems in this code.
+# cause problems in this code. Likewise, special characters in
+# filenames may cause problems with some of the built-in rules.
#
# PACKAGE.* are used when building a distribution tarball.
#
@@ -162,7 +163,7 @@
#
# Note that GNUmakefile and shake-n-make.make are added to DIST_FILES by
# default, so you don't need to add those. If shake-n-make.make is using
-# mkdep.c to generate C/C++ dependencies than that file is also
+# mkdep.c to generate C/C++ dependencies then that file is also
# automatically included in the distribution.
#
# If you want to use a non-GNU tar or change the compression type
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <sg...@us...> - 2008-01-11 20:23:24
|
Revision: 111
http://toc.svn.sourceforge.net/toc/?rev=111&view=rev
Author: sgbeal
Date: 2008-01-11 12:23:23 -0800 (Fri, 11 Jan 2008)
Log Message:
-----------
minor fixes and touches-up
Modified Paths:
--------------
make-book/trunk/code/ShakeNMake/shake-n-make.make
Modified: make-book/trunk/code/ShakeNMake/shake-n-make.make
===================================================================
--- make-book/trunk/code/ShakeNMake/shake-n-make.make 2008-01-04 18:47:20 UTC (rev 110)
+++ make-book/trunk/code/ShakeNMake/shake-n-make.make 2008-01-11 20:23:23 UTC (rev 111)
@@ -101,7 +101,7 @@
# Building a shared library:
#
# myDLL.DLL.OBJECTS = foo.o bar.o
-# myDLL.LDFLAGS = -L/a/lib/path -lmylib
+# myDLL.DLL.LDFLAGS = -L/a/lib/path -lmylib
# $(call ShakeNMake.CALL.RULES.DLLS,myDLL)
#
# Like CALL.RULES.BINS, you may pass an arbitrary number of DLL names to
@@ -196,16 +196,16 @@
ifneq (,$(COMSPEC))
$(warning Setting ShakeNMake.SMELLS.LIKE.WINDOWS to 1)
ShakeNMake.SMELLS.LIKE.WINDOWS := 1
-ShakeNMake.EXTENSIONS.DLL = .DLL# maintenance reminder: this must stay upper-case!
-ShakeNMake.EXTENSIONS.EXE = .EXE# maintenance reminder: this must stay upper-case!
+ShakeNMake.EXTENSIONS.DLL := .DLL# maintenance reminder: this must stay upper-case!
+ShakeNMake.EXTENSIONS.EXE := .EXE# maintenance reminder: this must stay upper-case!
else
ShakeNMake.SMELLS.LIKE.WINDOWS := 0
-ShakeNMake.EXTENSIONS.DLL = .so
-ShakeNMake.EXTENSIONS.EXE =# no whitespace, please
+ShakeNMake.EXTENSIONS.DLL := .so
+ShakeNMake.EXTENSIONS.EXE :=# no whitespace, please
endif
-ShakeNMake.MAKEFILE = shake-n-make.make
+ShakeNMake.MAKEFILE := shake-n-make.make
$(ShakeNMake.MAKEFILE):# avoid breaking some deps checks if someone renames this file (been there, done that)
########################################################################
@@ -224,7 +224,7 @@
# auto-add the makefiles to DIST_FILES, filtering out any which start
# with a dot because we use such files for temp/volitile files which
# contain Make rules (C/C++ deps, for example).
-PACKAGE.MAKEFILE = $(firstword $(MAKEFILE_LIST))# normally either Makefile or GNUmakefile
+PACKAGE.MAKEFILE := $(firstword $(MAKEFILE_LIST))# normally either Makefile or GNUmakefile
PACKAGE.DIST_FILES += $(filter-out .%,$(MAKEFILE_LIST))
@@ -327,8 +327,10 @@
ShakeNMake.CALL.UNINSTALL = { \
test -d $(1) || exit 0; \
for x in $(2); do \
- echo -e "\t<-- " $(1)/$$x; \
- rm -f $(1)/$$x || exit; \
+ f=$(1)/$$x; \
+ echo -e "\t<-- " $$f; \
+ if [ -d $$f ]; then rm -r $$f; else \
+ rm -f $$f || exit; fi; \
done; \
}; \
rmdir $(1) 2>/dev/null || true;
@@ -482,7 +484,7 @@
# Also defines the var $(1).DLL, which expands to the filename of the DLL,
# (normally $(1)$(ShakeNMake.EXTENSIONS.DLL)).
define ShakeNMake.EVAL.RULES.DLL
-$(1).DLL = $(1)$(ShakeNMake.EXTENSIONS.DLL)
+$(1).DLL ?= $(1)$(ShakeNMake.EXTENSIONS.DLL)
ifneq (.DLL,$(ShakeNMake.EXTENSIONS.DLL))
$(1).DLL: $$($(1).DLL)
endif
@@ -607,7 +609,7 @@
##################################################
PACKAGE.DIST_FILES += $(ShakeNMake.DOXYGEN.DOXYFILE_TEMPLATE) $(ShakeNMake.DOXYGEN.INDEX)
-ShakeNMake.DOXYGEN.INCLUDE_DIRS = .
+ShakeNMake.DOXYGEN.INCLUDE_DIRS += .
ShakeNMake.DOXYGEN.OUTPUT_DIR = $(PACKAGE.NAME)-$(PACKAGE.VERSION)-doxygen
@@ -642,8 +644,8 @@
CLEAN_FILES += Doxyfile $(ShakeNMake.DOXYGEN.OUTPUT_DIR) latex
-INSTALL_DOXYGEN = $(ShakeNMake.DOXYGEN.OUTPUT_DIR)
-INSTALL_DOXYGEN_DEST = $(prefix)/share/doc/$(PACKAGE.NAME)
+INSTALL.DOXYGEN := $(ShakeNMake.DOXYGEN.OUTPUT_DIR)
+INSTALL.DOXYGEN.DEST ?= $(prefix)/share/doc/$(PACKAGE.NAME)
install: doxygen
$(call ShakeNMake.CALL.RULES.INSTALL,DOXYGEN)
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|