Re: [TIProtocol-askcisco] TIP on TP Server Info Inquiry

[David B. (dbenham) <db...@ci...>]

Martin
Since your question is specific to Cisco's TIP implementation, you should send your questions to the  open source project mail specific to asking Cisco questions ...
 
         Email:   tip...@li...
  Archives:   http://sourceforge.net/mailarchive/forum.php?forum_name=tiprotocol-askcisco

Please respond with further detail about your configuration and release numbers (endpoints, UCM, TP Server inclusive) used.

If you have followed the profile instructions to interop with a CTS 1.7 or earlier, meeting all the restricted video details, you will need to pre-configure your endpoint on the TP Server's 'add an endpoint' as a "Cisco CTS / Legacy Cisco CTS" per pages 75 or 142 on the user guide (see URL).
http://www.cisco.com/en/US/docs/telepresence/infrastructure/ts/user_guide/Cisco_TelePresence_Server_2-2_Product_user_guide.pdf
If you have yet done that, do so and try again.


> -----Original Message-----
> From: martin harcar [mailto:mar...@ev...]
> Sent: Friday, February 03, 2012 5:50 AM
> To: tip...@im...
> Subject: IMTC TIP Info Inquiry
> 
> Hi.
> 
> I am trying to make a SIP call to TANDBERG Telepresence Server 8710
> follow the rules in TIP documentations. I was able to get HD video but
> did not receive any TIP rtcp packet.
> Is some specific port used for TIP negotiation?
> I did TIP negotiation on local receive audio/video and remote receive
> audio/video ports get from sip call. Than I try to use ports+1 on both
> side. In both cases I did not receive any TIP rtcp packets.
> I am using for tip negotiation open source TIP library and tested it
> between my two endpoints and works OK.
> 
> Thanks for any answer.
> Regards
> Martin.