Re: [TIProtocol-askcisco] sprops parameter set for CTS 1000 version 1.7

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

Here are the logs which can be downloaded as follows
1. the cts logs
http://db.tt/r53Q4eZ
2. SIP Packet capture
http://db.tt/Mv6fdCJ
3. RTP/RTCP packet capture
http://db.tt/k1OdFyq

the cts is at 10.160.3.105 registering itself to 10.160.3.106 at 
extension 7000. Our software is 8888 from 10.160.3.203

let me know if you need  any furtehr information

thanks
aravind

On 04/21/2011 02:14 PM, nermeen wrote:
> Hi Aravind,
>
> Yes that is a valid assessment. I just wanted to make sure that you 
> are not concluding that no in-band parameters are being sent because 
> you see the out-of-band parameters being sent as well.
>
> Please forward the packet capture and the CTS logs and we will have a 
> look.
>
> nermeen
>
>
> On 4/21/11 8:50 AM, "Aravind Sethuraman" 
> <ara...@te...> wrote:
>
>     Hi nermeen and Steve,
>
>     I have done a packet capture of the actual media and have not been
>     able to do a decode via videsnarf or other tools. This lets me
>     think there may be missing in-band parameters. I could be wrong.
>     Is this a valid assesment?
>
>     thanks
>     aravind
>
>
>
>     On 04/21/2011 11:20 AM, nermeen wrote:
>
>         Re: [TIProtocol-askcisco] sprops parameter set for CTS 1000
>         version 1.7 I also want to reiterate that CTS supports in-band
>         signaling of SPS/PPS as well as out of band signaling of
>         SPS/PPS. In other words CTS always sends SPS/PPS in SDP even
>         when it is also sending them in-band.
>
>         nermeen
>
>
>
>
>         On 4/20/11 10:45 PM, "Steve Fry" <sf...@ci...> wrote:
>
>
>             Hi Aravind,
>             CTS does look at the SPS/PPS and uses these to detect the
>             profile idc, image height / width, and coding mode (CABAC
>             vs. CAVLC).
>             If you can please collect the CTS logs from one of the
>             calls and send them to me, we can take a look at it and
>             try to determine
>             what the issue is. Also a Wireshark trace of the call
>             startup would be helpful.
>
>             Thanks
>             Steve Fry
>             CTS endpoint team
>
>
>
>             On 4/20/11 1:32 PM, "Aravind Sethuraman"
>             <ara...@te...> wrote:
>
>
>                 Hello all
>
>                 We are building a TIP aware end point and we want to
>                 know if there is any way CTS can support in band RTP
>                 payload parameter set instead of out of band via
>                 sprop-parameter-sets. according to the TIP protocol
>                 Section 5.2 item #6 states that TIP endpoints must
>                 indicate support for inband parameter sets.
>
>                 Currently we are able to setup a call with the cTS
>                 1000 and achieved TIP negotiation and have the packet
>                 flowing but neither our end point not CTS 1000 are
>                 able to decode.
>
>                 any help will be much appreciated
>
>                 regards
>
>                 Aravind Sethuraman
>                 Chief Software Architect
>                 Teliris, Inc. | 55 Broadway, 14th Floor, New York, NY
>                 10006 | C +1.917.355.0119 | O +1.212.490.1065 x1408 |
>                 F +1.212.269.2869 | AIM aravindsraman
>
>
>                 ------------------------------------------------------------------------
>                 ------------------------------------------------------------------------------
>                 Benefiting from Server Virtualization: Beyond Initial
>                 Workload
>                 Consolidation -- Increasing the use of server
>                 virtualization is a top
>                 priority.Virtualization can reduce costs, simplify
>                 management, and improve
>                 application availability and disaster protection.
>                 Learn more about boosting
>                 the value of server virtualization.
>                 http://p.sf.net/sfu/vmware-sfdev2dev
>
>                 ------------------------------------------------------------------------
>                 _______________________________________________
>                 TIProtocol-askcisco mailing list
>                 TIP...@li...
>                 https://lists.sourceforge.net/lists/listinfo/tiprotocol-askcisco
>
>
>
>             ------------------------------------------------------------------------
>             ------------------------------------------------------------------------------
>             Benefiting from Server Virtualization: Beyond Initial
>             Workload
>             Consolidation -- Increasing the use of server
>             virtualization is a top
>             priority.Virtualization can reduce costs, simplify
>             management, and improve
>             application availability and disaster protection. Learn
>             more about boosting
>             the value of server virtualization.
>             http://p.sf.net/sfu/vmware-sfdev2dev
>
>             ------------------------------------------------------------------------
>             _______________________________________________
>             TIProtocol-askcisco mailing list
>             TIP...@li...
>             https://lists.sourceforge.net/lists/listinfo/tiprotocol-askcisco
>
>
>