Checking device
Open COM2 serial port at 115200 Baud Rate
Hardware RTS resetting device
Device detected: '18F 2620/4620/4680'
Source HEX file opened: C:\Dropbox Externo\JJ Cientifica\Lifilizador\03-Firmware\Liofilizador - Placa Mae - MPLAB\PIC16PIC18\Liofilizador - Mother Board.X\dist\default\production\Liofilizador_-_Mother_Board.X.production.hex
Warning: CRC failed on line 1128
Error: Hex file for PIC16F, PIC family mismatch
Closed COM2 serial port
TinyBootLoader+ completed
Could someone help me in this case?
Last edit: Neraildes da Silva 2019-03-16
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
You're giving CRC error. I need the bootloader (Tiny Bootloader) for the PIC18F4620 running at 32Mhz with PLL on and with 115200bps communication.
https://sourceforge.net/p/tinypicbootload/svncode/HEAD/tree/firmwares/Microchip%20PIC/PIC10-12-16-18/PIC18F/TinyB18F2620-4620.asm
The result is:
Checking device
Open COM2 serial port at 115200 Baud Rate
Hardware RTS resetting device
Device detected: '18F 2620/4620/4680'
Source HEX file opened: C:\Dropbox Externo\JJ Cientifica\Lifilizador\03-Firmware\Liofilizador - Placa Mae - MPLAB\PIC16PIC18\Liofilizador - Mother Board.X\dist\default\production\Liofilizador_-_Mother_Board.X.production.hex
Warning: CRC failed on line 1128
Error: Hex file for PIC16F, PIC family mismatch
Closed COM2 serial port
TinyBootLoader+ completed
Could someone help me in this case?
Last edit: Neraildes da Silva 2019-03-16